Open relay linux jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    4,347 open relay linux jobs found, pricing in USD

    ...Controller with following specification 1 Sensors used Thermocouple J,K,E, PT100 etc 2 Micro 8051 Family 3 Output Electro magnetic Relay 4 Display 1 Set Value seven segment LED, 2 . PV seven segment LED 5 SETTings 3/4 keys P/B on front panel 6 Range -100 to

    $183 - $550
    $183 - $550
    0 bids

    I want to connect three solar power (include 7 cases) with IEEE 3 node and IEEE 9 bus and 13 node test and analyze the protection technique and proposed one technique for IEEE bus system which works for the solar connected system and without it. (MATLAB)

    $114 (Avg Bid)
    $114 Avg Bid
    1 bids

    If you understand the name of the project and have experience working with these technologies then you're probably a good fit for the project. We're developing a web application which will host educational resources including, but not limited to flashcards, multiple choice questions, and exams.

    $3109 (Avg Bid)
    $3109 Avg Bid
    19 bids

    [login to view URL] on/off equipment and machinery by using relay and esp8266 chip from remote location through web dashboard . [login to view URL] on/off by setting sensor parameters like- temp and humidity sensor(AM2301). [login to view URL] facility like sonoff TH16 [login to view URL] Sharing facility and Timing schedules.

    $190 (Avg Bid)
    $190 Avg Bid
    15 bids

    ...hierarchy to set number of batteries in bank and voltage along with Potentiometer to set over and under voltage range (on) and range (off) action coupled to drive a 20 amp relay to invoke other modules. Total 11 relays on main board 1 for bank total and 1 for each battery in its bank Board shall feature Aux plug to accommodate backup Bank monitoring

    $469 (Avg Bid)
    $469 Avg Bid
    8 bids

    Arduino code for a bluetooth controlled firefighting robot. The code should allow control of robot movements, up/down function of servo and on/off of a pump connected by a relay module.

    $18 (Avg Bid)
    $18 Avg Bid
    23 bids
    YouTube Video Creation 4 days left
    VERIFIED

    I need help making a video and putting the information I have together to tell a story. I will require someone who will be willing to communicate r...encouraging offsite communication which is against our Terms and Conditions -Section 13:Communication With Other Users] to get a better understanding of what I'm looking to relay with this video project.

    $129 (Avg Bid)
    $129 Avg Bid
    32 bids

    Looking complete development and actual working pcb that will monitor battery bank for under and over voltages during charge and discharge. B...with green (normal) and red (fault) led. Desire dip switch voltage selection hierarchy along with Potentiometer to set range on and range off action coupled to drive a 10 amp relay to invoke other modules.

    $176 (Avg Bid)
    $176 Avg Bid
    12 bids

    PROJECT IDEA COMPONENTS 1. Water flow meter 2. Arduino 3. LCD 4. Relay 5. Solenoid Valve 6. Think speak 7. Speaker Detailed Description: 1. When water flows , the water flow meter should measure the pressure of water in liters and the information about how many liters of water is consumed should be transmitted to think speak 2. For the first four

    $26 (Avg Bid)
    $26 Avg Bid
    23 bids

    A card with a 16x4 LCD screen that sends data from the current sensor using MQTT and has remote relay control. There will be 3 internet connection protocols. (it will be 2 protocol WIFI and GPRS) - ENC28J60 will be used as a wired internet chip. - wireless ESP8266 or ESP8285 antenna chip can be used. (It can also be in the form of a ready-made module

    $204 (Avg Bid)
    $204 Avg Bid
    8 bids

    I need a program that you import a list into (...a list into (CSV), then barcodes are scanned with a scanner, containing the contents of the list. If a barcode is skipped or scanned in the wrong order I need it to click a relay. I am going to use this for a mail house to ensure that mail is kept in the correct order throughout the production process .

    $158 (Avg Bid)
    $158 Avg Bid
    13 bids

    ...the upload files. The microcontroller must be a 16F887. The LCD of the PICDEM ™ 2 PLUS DEMONSTRATION BOARD must serve as the output. If the code has been entered correctly, a relay must switch to simulation. The program should contain interrupts and timers. Conditions for the access control: It must be ensured that it is very unlikely that the door can

    $127 (Avg Bid)
    $127 Avg Bid
    14 bids

    ...interesting and inviting to everyone, please feel free to share. We can discuss any details over the phone. I have a 24-hour video telecommunication service, Sorenson Video Relay ([login to view URL]), that allows us to communicate over telephones in real-time, via a sign language interpreter to speed up communication and work productivity. My phone

    $500 (Avg Bid)
    NDA
    $500 Avg Bid
    1 bids

    Need a good smart solution for a mass sm...bruter. -scan ips - can brute force domain and ip smtp - very fast (syn scan), many parallel threads (over 7000) - checks open relay for each. - checks if the server delivers email into inbox or bulk folder. - working an a Linux Root or VPS - saving the inbox smtp in a text file with all important data

    $32 (Avg Bid)
    $32 Avg Bid
    7 bids

    Grabgigs.com. Need to make the site fully functional (registration, email relay , show map points, allow to make post etc.) Entire site used to be working and for unknown reason has errors everywhere. Have tried changing php version, doesn't help. Please tell your price and deadline (If deadline is not met which you request, code will be scrapped

    $425 (Avg Bid)
    $425 Avg Bid
    56 bids

    Grabgigs.com. Need to make the site fully functional (registration, email relay , show map points, allow to make post etc.) Entire site used to be working and for unknown reason has errors everywhere. Have tried changing php version, doesn't help. Please tell your price and deadline (If deadline is not met which you request, code will be scrapped

    $24 / hr (Avg Bid)
    $24 / hr Avg Bid
    62 bids

    1. Emails relay. Hide the email or the seller / buyer when having a conversation in between each other. Confidential email - the true email of buyer or seller should not be shown to each other. 2. In listing details, and [login to view URL] (example:[login to view URL] and [login to view URL]) Make

    $141 (Avg Bid)
    $141 Avg Bid
    16 bids

    Necesito que 4 sensores RFID activen relay durante unos segundos. Debe detectar la posición correcta. Se debe configurar facilemente pulsando un botón. Es decir, coloco los sensores cada uno en el sitio que quiero que funcionen y pulso un botón. Ya quedan registrados para esa posición. Busco que sea zona de ESPAÑA a ser posible y que en el precio vayan

    $155 (Avg Bid)
    $155 Avg Bid
    16 bids

    Help and guide me to set up a Discord Selfbot/Userbot that relays Messages from one channel to another without using a Discord Bot

    $13 (Avg Bid)
    $13 Avg Bid
    2 bids

    ...dynamic javascript driven interfaces. One option is to use Zoho Creator, another is to use a external webserver that routes requests from the user's client browser to Zoho. This relay webserver could inspect the files being returned from Zoho and insert the icons and related code into the page before sending it to the client. You may use either approach

    $2730 (Avg Bid)
    $2730 Avg Bid
    26 bids

    Design and liaise with PCB manufacturer to develop an stand alone OCPP1.6 device that can be connected to a non OCPP compliant EV Charger. The device will operate a relay that controls the power supply to a dumb )Non OCPP compliant) charger so it can be added to an OCPP server. The device will also measeure the delivered energy

    $390 (Avg Bid)
    $390 Avg Bid
    8 bids

    we need a relay board for our automation products... we have already designed the schematics and searching a well experienced candidate to desing the PCB..

    $103 (Avg Bid)
    $103 Avg Bid
    31 bids

    Hi I am intersetd in some ocpp version 1.6 and 2.0 work being done for control of EV chargers. In particular ans integr...Also I am intersted in an ocpp PBB that can be used to add a dumb (non-OCPP) charger into a network. Ideally it would communicate with an An ocpp network server and switch a relay to turn the charger on and off measuring power etc.

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    1 bids

    I have a device that monitors and controls water parameters. This device connects to a power relay box that turns the plugs off and on. I am looking for graphics that indicate it is a power box for water controller. I have attached what the power box looks like. come up with some back ground graphics and a type of water power logo. Some ideas I had

    $25 (Avg Bid)
    Guaranteed
    $25 Avg Bid
    4 entries

    ...can start working on it. The recommended langauge is R, but if you wish to use something else (lets say Python), please tell me which langauge and which dataset and I will relay your suggestion to the teacher where he will accept or not. So probably a small explanation of your choice will help him make the decision. On the 14th/June, a document of

    $142 (Avg Bid)
    $142 Avg Bid
    21 bids

    - IP Rotation - SPF, Domain Keys Enabled - Reverse DNS enabled - Open Relay Disabled - DMARC Enabled - Dkim-Milter with sendblaster, this is daily work for long term. ALSO AFTER COUPLE MAILS IT GOES TO SPAM ANY SOLUTION? TRYED ALREADY WITH DIFFRENT MAIL, DIFFRENT LEADS, WARM IP NOTHING WORKS..

    $152 (Avg Bid)
    $152 Avg Bid
    9 bids

    i'd like to design a PCB(gerber file) consisting of an ESP8266,relay board,power supply(5v typeB power supply) and 5V CMOS.

    $32 (Avg Bid)
    $32 Avg Bid
    37 bids

    ...360* -One for tilt up/down hopefully 90* -12v input -12v relay as an output - 2.4ghz -An led on reciever On/waiting/connecting blue Ready/working/all good green Problem/fault red Transmitter -One button for a deadman switch so no movement unless pressed - One button to control 12v relay - One joystick for both servos - Want it to be wireless so

    $1749 (Avg Bid)
    $1749 Avg Bid
    18 bids

    ...360* -One for tilt up/down hopefully 90* -12v input -12v relay as an output - 2.4ghz -An led on reciever On/waiting/connecting blue Ready/working/all good green Problem/fault red Transmitter -One button for a deadman switch so no movement unless pressed - One button to control 12v relay - One joystick for both servos - Want it to be wireless so

    $760 (Avg Bid)
    $760 Avg Bid
    1 bids

    ...360* -One for tilt up/down hopefully 90* -12v input -12v relay as an output - 2.4ghz -An led on reciever On/waiting/connecting blue Ready/working/all good green Problem/fault red Transmitter -One button for a deadman switch so no movement unless pressed - One button to control 12v relay - One joystick for both servos - Want it to be wireless so

    $152 (Avg Bid)
    $152 Avg Bid
    1 bids

    I am looking to have PCB with electronics. The electronics will relay a signal, wirelessly, to a smart device or small monitor once a circuit is completed. Additional information will be provided upon request.

    $43 (Avg Bid)
    $43 Avg Bid
    8 bids

    Our PCB designer is ill and we need this microcontroller completed before 15/6. It's simple: just a 28 pin microcontroller, a rotary switch,a relay, 3 transistors and discrete components. The uploaded file is not the real design but has the same number of components. When awarding the design (Saturday 9/6) we will provide component placement instructions

    $160 (Avg Bid)
    $160 Avg Bid
    34 bids

    I would like to build a Workflow using a...Arduino Mega 2560 with the Ethernet Shield V2 as the master and acting as Web server and some pull up triggers and 2 or more Mega 2560 as slaves for pullups and outputs to relay etc. I would just require the Proper schematic for pin connections among the Cards and Basic codes proving successful conection .

    $110 (Avg Bid)
    $110 Avg Bid
    4 bids

    ...d'intégrer le widget Mondial Relay au processus de commande de mon site Shopify: Après avoir composé son panier, le client doit choisir le mode de livraison (3 choix : à domicile, retrait en magasin ou livraison en point relais). S'il choisi la livraison en point relais, j'aimerais faire apparaître le widget Mondial Relay pour perm...

    $33 (Avg Bid)
    $33 Avg Bid
    3 bids

    ...skills are a must. Research and writing abilities will be helpful. Example tasks may be to look into certain subjects and report back with a detailed report and understanding to relay to CEO. This may be followed by implementation of new systems and document creation. A strong knowledge of new technology, Microsoft Office programs, and social media platforms

    $449 (Avg Bid)
    $449 Avg Bid
    34 bids

    ...connect to the webserver, checking the temps and switching relays 2 the relay button on the webpage to override the normal program loop and to turn on the fans for 2 hours, but for the fan to be able to be switched off (sub loop on relay?) 3 the webpage to show the current relay status. 4 to be able to set a temperature for the fans to cut in rather

    $66 (Avg Bid)
    $66 Avg Bid
    13 bids

    ...Other social media Name: ethical spammer User stories: As an ethical spammer, I want to 1. Sense new media (mainly pictures) posted on certain (multiple) Facebook pages. 2. Relay / broadcast / forward those images onto certain (multiple) WhatsApp groups and WhatsApp numbers (maybe after downloading). 3. Admin should be able to turn-on and turn-off the

    $304 (Avg Bid)
    $304 Avg Bid
    2 bids

    the project is home automation ...size should not exceed more than 8 inch x 6 inch. It consists of 8 relays, 1 Atmega 16/32, Power supply with 220V AC to 5V DC and 3.3V DC converter , Nrf24lo1 Rf module. The relay should be internally powered with 5V control voltage and 220V AC supply voltage external power. no multi layer permitted double sided only.

    $112 (Avg Bid)
    $112 Avg Bid
    58 bids

    Need Arduino program for arduino mega Additional parts, .96 II2C OLED, dual relay, two servos, two 3 wire fans, 2 wire Led light strip, 2x dht22 and 1 100k thermistor -Program needs to monitor temperature from 1 dht22 and the thermistor and humidity for other dht22 -It needs to have 2 to 3 modes selected by button press. -pla mode, sets servos to

    $353 (Avg Bid)
    $353 Avg Bid
    3 bids

    ...Servo1 pushbutton, so it will be as mentioned on Servo1 description below. c. Servo1: is like a valve opener for the container, so the order will be (position of Servo4 – then open valve by Servo1) d. Servo2: conditioning layer drop e. Servo3: cleaner f. LED's: 4 led's will be for the for materials, 1 for heating in process, 1 device power is on. 1 for

    $633 (Avg Bid)
    $633 Avg Bid
    31 bids

    Looking for a trustworthy individual who is capable of workin...subject matter. We have tools such as promo republic and others that allow us to manage multiple campaigns very fast. You should have knowledge of promo republic, social bee, relay that and youzign to work effectively. We also have curated content too. You will be paid weekly or monthly.

    $532 (Avg Bid)
    $532 Avg Bid
    37 bids

    ...casual encounter website similar to adult finder.com. User profiles. Ability to post an advertising. Able to search common terms. Sort. User block. Flag advertising. Chat. Email relay. Privacy. Picture upload. Different levels of user. PayPal ready. Administration ability to control everything. Easily uploaded Advertising on index page. I am flexible and

    $125 (Avg Bid)
    $125 Avg Bid
    33 bids

    A command line program I can use in DOS to send a command to a relay. Let say the program name you write me is IPSEND ipsend [login to view URL]

    $22 (Avg Bid)
    $22 Avg Bid
    2 bids

    Design an enterprise scale network on Cisco Packet tracer. Skills required: 1. Sub-netting 2. Use of Cisco Packet tracer 3. OSPF 4. Frame Relay 5. DHCP 6. NAT and PAT 7. Vlan and trunking

    $238 (Avg Bid)
    $238 Avg Bid
    9 bids

    A small circuit board maximum dimensions are ( 40mm x 40mm ) 2 Relay Channel to control lights which takes input from a regular light switch. The lights are using only one line (Single way switches) to be controlled so this must be considered in the design. The circuit will be having ESP8266 as its core so a programming interface must be introduced

    $84 (Avg Bid)
    $84 Avg Bid
    33 bids

    ...the pump until the low level switch is normal. then the pump will restart. it will output a light buzzer. Pump will turn on to the auto mode, signal provided by a timer relay, if selected, only if the low level switch is not activated. if the low level switch is activated while the pump is running it will stop the pump until the low level switch

    $427 (Avg Bid)
    $427 Avg Bid
    5 bids

    ...com/product/2000 2. Rotary Switch 1 Pole 12 Position [login to view URL] 3. Fotek SSR-25DD Solid State Relay [login to view URL] Operation: Adafruit trinket will run a small 12vdc motor via the SSR for 20 seconds at a time, the interval between runtimes

    $52 (Avg Bid)
    $52 Avg Bid
    22 bids

    Hi Sergey K., I have a IOT circuit that contains a relay, non-isolated switching power supply, energy monitor and MCU. I need someone to do the followings please: 1- Refine the design 2- Reduce number of components or add any components that is required 3- Send the design for EMC/electrical safety certification/testing and do the paper works etc. I

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    1 bids

    ...come up in the project that may not be seen at once. Need this started, if the programmer is good, can continue working on the project or another project. EMAIL PIPING and RELAY - probably the hardest part. This will work into creating each user an email that's hidden sldkjfjsld@[login to view URL] for example so when users are emailing each other, they are

    $285 (Avg Bid)
    $285 Avg Bid
    3 bids

    ...Giant Electrical Appliances Co.,Ltd.Propaganda-- Commentary Wenzhou Giant Electrical Appliances Co.,Ltd. is a professional group production enterprise specialized in electric relay. The company is located at Capital of Low Voltage Electrical Appliance in China- Liushi Town with Convenient Traffic. Relying on the perfect industrial chain of peripheral

    $32 (Avg Bid)
    $32 Avg Bid
    2 bids