The term CAD/CAM denotes computer aided design and computer aided manufacturing. It is usually referred to in the context of software tools that perform a wide range of engineering functions. Selecting a proper CAD/CAM system is important to ensure that the stages of conceptualization and final production are under proper control. If you are foraying into computer-aided design and manufacture, you need an expert. There are many freelancers who can do this job for you at a relatively low cost. So, post your CAD/CAM job here and make your life easier! Hire CAD/CAM Designers

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    140 jobs found, pricing in USD

    Hi, I need Mechanical Engineer for a Solar Cells Project. See the attached file. The image needs to be analyzed in the ImageJ software. Thanks.

    $95 (Avg Bid)
    $95 Avg Bid
    2 bids
    Roof Plan required 6 days left
    VERIFIED

    Hello Everyone I have small floor layout plan , I need roof plan with placement of Joist.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    12 bids

    Make a DIY project for foam concrete for home.

    $415 (Avg Bid)
    $415 Avg Bid
    9 bids
    redesign of local road 6 days left
    VERIFIED

    I have proposition to municipality for road improvement & I'm looking for civil engineer with understanding of road design & traffic mechanism

    $431 (Avg Bid)
    $431 Avg Bid
    12 bids

    I have 6 existing drawings (PDF) of a building extension project (plans and elevations) which I need to be re-drawn with changes. All existing drawings will be provided which are fully dimensioned for re-drawing and all changes will be provided as a sketch over top of the existing drawings with notes / comments to assist with the changes that need to be made. One drawing provided for reference...

    $311 (Avg Bid)
    $311 Avg Bid
    53 bids

    Want to fix Aluminium Sheet or FRP sheet size 7 x 6 feet. Wooden Table with iron rods welded on 4 sides. Roof is square shape made of iron rods dismantable. With wood pieces both in horizontally and vertically tied up with steel wire. My doubt Is whether I can I nail it on the thin wooden scales or ani tie up or weld it on SQUARE SHAPED FRAME of iron rods. Please share your thoughts witho...

    $57 (Avg Bid)
    $57 Avg Bid
    2 bids

    I have an AUTOCAD drawing with around 156 cross section profiles at different chainages. You need to replace 16 cross section profiles at chainages specified by me with the new data of profiles which will be provided by me.

    $24 (Avg Bid)
    $24 Avg Bid
    17 bids

    We are a company specializing in the custom production and processing of metal parts. We can provide the manufacturing of castings, forgings, and welded structural parts. Now we need competent individuals to help find customers. The remuneration can be high commission or low monthly salary. If you have channels or resources, welcome to talk to me. If you are successful on our cooperation, it will ...

    $489 (Avg Bid)
    $489 Avg Bid
    12 bids

    The project is to create a 3D printable model of a two part jewelry piece from sketches and photos.

    $43 (Avg Bid)
    $43 Avg Bid
    17 bids
    Pool design 6 days left
    VERIFIED

    Looking for experienced designers for a new pool for my house. The structural design is already complete. You need to show plumbing, strainers, pump sizing and parts list for a complete pool package. Will also need to calculate flows for waterfall into and out of pool with surge tank

    $391 (Avg Bid)
    $391 Avg Bid
    18 bids

    Looking for an artcam expert who can work with me to create a 3d model for a few hours everyday for a few days to make an accurate 3d model for CNC routing

    $110 (Avg Bid)
    $110 Avg Bid
    6 bids

    A lightweight casual slip on shoe with a recyclable sole and sustainable, printable fabric upper and a sustainable cushy insert that molds to the foot and is recyclable, washable and non toxic

    $380 (Avg Bid)
    $380 Avg Bid
    18 bids

    I need an architect to design a warehouse plan

    $333 (Avg Bid)
    $333 Avg Bid
    62 bids
    need revit expert 6 days left
    VERIFIED

    more info will b shared in chat

    $8 - $20
    Sealed
    $8 - $20
    14 bids

    Need help drawing specific parts for seattle studium rush job, need to come and work from our las vegas office

    $30 / hr (Avg Bid)
    Local
    $30 / hr Avg Bid
    13 bids
    Consultant 6 days left

    Architecture work, mechanical work like HVAC and plumbing , interior design, sustainable, Leed, MEP and construction engineering

    $1967 (Avg Bid)
    $1967 Avg Bid
    17 bids
    100 MPH Kite 6 days left

    I need a kite that I can print on my 3d printer that will hold up in 100MPH winds. Wind would have to flow through the openings in the kite to keep it flying straight. Looking for a 10 inch tall one to start.

    $26 (Avg Bid)
    $26 Avg Bid
    4 bids

    Convert sketch up pro 3D design into 2D design using freecad software

    $81 (Avg Bid)
    $81 Avg Bid
    30 bids
    Product packing and Desinger. 6 days left
    VERIFIED

    Someone knows how to do product develoopent , Designing, Packing, Someone studys the market before develops the design, We need somone on going for long term.

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    22 bids
    Graphic work 5 days left

    I am having detergent soap and cakes manufacturing unit. So required best designs for designing purposes

    $225 (Avg Bid)
    $225 Avg Bid
    18 bids
    Solidworks -- 2 5 days left

    Hello, I need someone with Solidworks (who can work with assembly), will provide you some images and you need to develop STANDARD parts as per the availability in the market (Australia). Please visit the link for a better understanding:- [login to view URL] thanks

    $58 (Avg Bid)
    $58 Avg Bid
    24 bids

    We are a small family owned building company. We have architectural drawings in PDF for a property we are renovating and extending. We would like to have a 3D rendering of said property based on those drawings for our portfolio of work

    $205 (Avg Bid)
    $205 Avg Bid
    114 bids

    i need to built hexa copter 3d i can print that on 3d printer design so that

    $20 (Avg Bid)
    $20 Avg Bid
    10 bids

    Hello there. I have written my requests below. 1- Design of throw pillow case 2- Geometric design. 3- Set of 4 4- compatible geometric designs 5- Having done a pillow cover design before 6-Mock up will be done. Thanks

    $111 (Avg Bid)
    $111 Avg Bid
    16 bids

    Filling and stoppering system for nested glass syringes Interfaces I Equipment: All parts over the table top the machine, work table, panels, base the machine should be S.S. (stainless steel),materials use for construction should be approved by F.D.A. for pharmaceutical application. All material contact part with product: polished AISI 316LRa=0,6 μm,welded edges<=1.6 μm, the unit must...

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    8 bids

    Hello, The company I work for is hoping to have data from their CAD DWG files exported directly into a preformatted Excel spreadsheet. They want data like the area of the rooms (polyline) building name and number and the categorization of the room (based on the colour assigned to it). I have been struggling to find any sort of viable solution. I have tried using various scripts for exporting data ...

    $966 (Avg Bid)
    $966 Avg Bid
    30 bids

    Draw a house plan based on submitted drawings that are ready for stamps Included all typical architectural detailing normal for plan submission Provide in AutoCad (DWG) and PDF formats Specify all openings, construction etc...

    $132 (Avg Bid)
    $132 Avg Bid
    55 bids

    I need a residential grading plan prepared for a permit application.

    $1014 (Avg Bid)
    $1014 Avg Bid
    31 bids

    Retrofit 17 pages of an old electrical schematic. I'll be doing some mark-ups as some components have changed. Needs to be done or be compatible with Autocad Electrical.

    $103 (Avg Bid)
    $103 Avg Bid
    33 bids
    House plan 5 days left

    I need a house plan in autocad 3d

    $124 (Avg Bid)
    $124 Avg Bid
    64 bids
    FreeCAD drawings 4 days left

    We require a set of drawings compiled in FreeCAD. Must be FreeCAD only, no other programs permitted please We have Solidworks Drawings and models we can share DWG,DXF and PDF see example file attached which will aid in expediting the process

    $32 / hr (Avg Bid)
    $32 / hr Avg Bid
    26 bids

    Job Description: Develop and maintain 2D CAD drawings (e.g. PFD"s, P&ID"s, One-Lines, General Layouts for all disciplines, Plans, Sections and Details, etc.) using software such as AutoCAD (required), Microstation and/or SmartSketch. In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills. . TASKS AND RESPONSIBILITIES: Re...

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    14 bids

    Hi, I have a house extension project, please see all attached information. The house is brick, GF and 1F is timber and roof as well, so we will use: GF ground-bearing slab with trench-fill foundations, External walls cavity (conc block-insulation-block) internal walls stud partitions Steel beams and columns To be considered, please send me your concept structure solution proposal, just conce...

    $227 (Avg Bid)
    $227 Avg Bid
    13 bids
    Full set drawing -- 2 4 days left
    VERIFIED

    looking for architect to issue a full set construction drawing including section, elevation and details. require more then 5 years of experience and previous work experience on commercial construction drawings.

    $349 (Avg Bid)
    $349 Avg Bid
    36 bids

    Hello to all. The [login to view URL] file have a map with 2 areas. I have to create 3 different files: 1st – TOTAL AREA – 519.356m2 2nd – SMALL CUTTED AREA – 16.000m2 3st – REMAINING AREA 503.356m2 More details in "Freelancer Job - 3 DWG [login to view URL]" I don't have the AUTOCAD to verify, so, I need the pictures of it, showing the areas.

    $21 (Avg Bid)
    $21 Avg Bid
    42 bids

    I want it to be done within 12 hours and submit the report in word format

    $37 (Avg Bid)
    $37 Avg Bid
    9 bids

    I am converting an old motel into some apartments, I want a drawing to present to bank, fir marshal and city something simple

    $388 (Avg Bid)
    $388 Avg Bid
    24 bids

    I am going make a mold with 3D printing and use it for plastic injection at room temperature (silicone casting) so I need to design the CAD file. It is necessary to include all necessary design features of an injection mold (e.g. holes to let air out, parts that assemble together, etc.).

    $160 (Avg Bid)
    $160 Avg Bid
    60 bids
    Solidworks 4 days left

    Hello, I need someone with Solidworks (who can work with assembly), will provide you some images and you need to develop STANDARD parts as per the availability in the market (Australia). Please visit the link for a better understanding:- [login to view URL] thanks

    $39 (Avg Bid)
    $39 Avg Bid
    31 bids
    Ansys work -- 2 4 days left
    VERIFIED

    I want to get this project done in 12 hours. it is easy and won't take more than 2 hours.>> [login to view URL] must investigate the effects of compressibility and shock wave generation over the specific NACA airfoil with Ansys Fluent at various velocities. Subsonic, Transonic,and Supersonic conditions must be [login to view URL] conditions may differ depending on your [login to view U...

    $55 (Avg Bid)
    $55 Avg Bid
    8 bids
    Mechanical Engineer -- 3 4 days left
    VERIFIED

    Looking for a Mechanical engineer that can help with an air filter. We can use axial fans to suit our needs (low cost, low wattage, low noise, high efficiency at ~75Pa pressure drop). All the centrifugal fans we have seen have a high pressure drop profile beyond our specs. The direction of flow wise, centrifugal fans would have kept design simpler so it was our first choice (contaminated air ent...

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    26 bids

    I want someone to find velocity and acceleration of links of my mechanism. like we do in mechanics of machinery and dynamics of machinery subjects.

    $31 (Avg Bid)
    $31 Avg Bid
    10 bids

    Need to convert 3D (.dxf) files to (.nc1) files for processing on structural beam line. Total number of files is (378 ea). Sample file attached to review before bidding.

    $365 (Avg Bid)
    $365 Avg Bid
    26 bids

    - Min Experience : 8 to 10 Years - Software : NX CAM 12 and above with Five axis mill turn experience. - Candidate should have basic GD&T knowledge - Candidate should have machining experience - min 8 -10 years - Candidate should have thorough cutting tools knowledge

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    4 bids

    Hello, I am a freelance architect looking for an assistant that can help me with design development drawing. I have attached an example Room A in CAD and the project is to draw room B land and elevations (attached in pdf) as a cad drawing and using all the same layers and tags. Then please produce an FFE BOQ.

    $30 (Avg Bid)
    Guaranteed
    $30
    6 entries

    I have 3 sets of coordinates Area1 - 100 coordinates (Easting and Northings) Area2 - 60 coordinates (Easting and Northings) Area3 - 75 coordinates (Easting and Northings) between these coordinates there will be a connector (overhead power line). This will not be a point to point line, there is a specific (common) angle of approach which will result in a lazy 'z' shape. There will onl...

    $802 (Avg Bid)
    $802 Avg Bid
    23 bids

    Hi, We need structural drawings in autocad for the attached banquet hall. The span in the center of the hall is 35 ft. Clear height required is 15ft. Layout image is attached.,

    $42 (Avg Bid)
    $42 Avg Bid
    29 bids
    Modify Moveo 6axis 3 days left
    VERIFIED

    Please find all details in the file attached. You have to modify the 6axis moveo robotic arm to take new motors. Need this done quickly. Thingiverse location and parts to be modified have been written in the attached file.

    $153 (Avg Bid)
    $153 Avg Bid
    4 bids
    Wiring Diagram for AGV 3 days left
    VERIFIED

    Looking for an AutoCAD electrical designer with previous experience in designing panels according to Industry Standards. The project description is as follows: Wiring Diagram has to be built for an AGV connecting the following components 1. Motors 2. Siemens PLC 3. Sensors 4. Curtis Motor Drive 5. Batteries 6. Wireless communication Device Inputs and Outputs list per component will be provided.

    $99 (Avg Bid)
    $99 Avg Bid
    10 bids

    Top CAD/CAM Community Articles