Building Architecture Jobs

I need to freelance for AutoCAD to Desgin building.

PRELIMINARY PROJECT OF A HOUSE IN A SMALL GROUND

Need an architect that is certified in the state of New York to provide stamped prints for a pole building for a building permit

I need plans for interior home wall removal

I need the plans necessary for the city of Houston to approve to removal a load bearing wall currently separating the living room and the foyer of my residence. I’ve included several pictures of the wall that to remove. Thanks Chris

I need a 3D exterior rendering for an under construction duplex. I have the floorplan and blueprint. I also attached an example rendering that I like, if you can make it almost the same style, that would be great. I need 2 renderings in total, can pay $50 each.

For a 30 sqm house, plans and elevation will be provided. Requred: - Foundation plan, floor and roof framing plan - construction detail such as - Window and door jamb details, External corner detail (showing cladding and wall), Deck to floor detail, Might need a shower detail showing how the wet area works, Deck edge detail with balustrade, Gutter detail, Gable end detail (cladding details) etc. Need experience with timber construction work. The time for each project (varied from 30 sqm to up to 45 sqm) is up to 5 days. Please apply with experience and sample work preferably for NZ.

Looking for an architectural plan/drawing for "tiny homes" (750 - 1100 square feet) on 3.5 acre site. Zoning would allow for 59 units, but would like a test fit showing this, taking into consideration parking/drive lanes, and topography (flat).

need someone to convert my CAD residential plans into Softplan. Includes floor plans and elevations.

The 3D charges for building a house like this are only $30 dollars Which will be edited until you are satisfied.

Seeking an architect to custom design a 1000-1500 sqft Moden with slant roof home sitting on top of a 4 car garage. Garage with an 8-9' clearance entrance. Two rooms (Children room) roughly 10x12, masters apx 14x15, combined kitchen, dining, and living room with large windows (nana doors style). Windows facing the rear, the entryway should be approached where no one can see the large living room windows. Deck large enough apx 20x20 terrence style. Need all plans to be in compliance with the state of Florida in Orange County.

Looking for architect to come up with the most efficient floorplan possible for a 5 to 8 story apartment building of 45 units. Lot size is 125x105. Zoning permits 45 residential units to be built on upto 8 stories. 68 parking spaces are required. Will definitely prefer someone that is familiar with Miami Building Codes (miami 21). As per image, property consists of Lots 3, 4, 5, 6, and 7. Side setbacks are zero, front setback is 15'. Parking space width is 8.5', depth is 18'. Each parking space needs 22' of backup space. Need 2 stairwells and 2 elevators. Looking for apartment units consisting of +/- 425 SF Studios, +/- 600 SF 1 bedrooms, +/- 750 SF 2 bedrooms. Need it done as quickly as possible.

Need a soils test for architect... CUP stage of construction project in Palm Desert, CA Have topo/survey/and conceptual drawings for new clubhouse at historic golf course

I need an architect to draw a floor plans for a house building architecture auto cad Interior design Car/cam Home design

I am looking to build a house and therefore started a ArchiCAD project which you will be provided with. Screenshots of the File you can find attached. I am looking for a dedicated ArchiCAD Expert to take this model to the detailed phase to be able to create contracts for contractors, create a budget by having lists and schedules and being able to switch and try different objects as a whole (e.g. changing all plugs, changing all doors etc) - so therefore i am looking for an individual ArchiCAD Expert who is interested in a interseting job and who really knows what he or she is doing! My style and respect for the people i work with can be seen in my reviews, so I am looking forward to work with an inspired and dedicated person. If there are questions I am happy to answer them. Thank you ...

Hi everyone, I’m hoping you can help me with an introduction to architecture/interior design companies or individuals who need interior/exterior design services. I have more than three years of professional work experience and work proficiently with SketchUp, Rhino, Lumion, Photoshop, Revit, Autocad. I am happy to offer my services for long-time cooperation as well. I will be so glad to send on my portfolio and cv. Thanks! Negin Mir. [Removed by Administration; Terms and Conditions : 13. Communication With Other Users]

I'm a home owner that is remodeling a new house and I need design ideas for the living room + kitchen space. Kitchen layout and some materials are already defined. The work will be on textures, collors and 3D rendering for the kitchen.

I have floor plan, i need structure and beam drawing

I need a floor plan of 4 studio apartments. Size +/-80m2. A simple hip roof. Brick size 290mm x 140mm x 90mm Patio is 0.8m from the structure file named- studio : attached, is a sample that inspired the the two pictures attached.

a modern villa design, landscape, and interior design in Saudi Arabia 800 m2 ( 28 x 30 ) land

Create a material list from existing House project. I have all the drawings, but need a complete list of materials that are needed. Size, amount, etc. The drawing language is in polish.

I have this farm house that i want to modernise its facade. One side facing west and the other side is facing south. The length of each side is around 25 meters and 5 meters hight. I want the simplest change that can cover the split unit hose and other wires. You can use and material in the modification but i want it to be simple and cost controlled There should be no demolishing of walls you can only add to it. Good luck

Hello I had the plans of my house made by an architect, I would now like you to draw them in 3d so that we can make a virtual visit, is this possible for you? at what price? I show you in attachment the plans

For a 30 sqm house, plans and elevation will be provided. Requred: - Foundation plan, floor and roof framing plan - construction detail such as - Window and door jamb details, External corner detail (showing cladding and wall), Deck to floor detail, Might need a shower detail showing how the wet area works, Deck edge detail with balustrade, Gutter detail, Gable end detail (cladding details) etc. Need experience with timber construction work. The time for each project (varied from 30 sqm to up to 45 sqm) is up to 5 days. Please apply with experience and sample work preferably for NZ.

We have the plan. Need 3D floor plan shot, the interior is preferred North American Style. need high quality renders.

Hello. Everyone! We are extending porch (have concrete base)of current house, and roof , too. knowledge of Florida building code should be preferred.

Need a autocad plan with elevation (Interior / Exterior).. rest of the details ill share on call or whatsapp

tomake floor plan changes in revit file

Hi, I need an architect for many projects and jobs I have coming up here shortly. Must be able to design to California Building Code 2019 and California regulations. Licensed or not is fine. Please send examples of previous projects, and your experience. Also, Lets example bid a project... Need FULL architectural plans (elevations, sections, floorplans) for a 1000sq.ft. addition to an existing home/structure. I would provide sketches of floor plans/measurements/photos/Scans of notes. How much would something like that cost to complete? and how long would it take?

interior design a 24 square meters studio

I would like to separate an existing apartment into 2 smaller ones and also design the interior (room arrangement, furniture placement, colors etc) for both of them.

We are a small builder and this will be our first multifamily project, we have been building single family dwellings for the last 5 years and need Architectural and Design Assistance for this 2 Phase 6 Storey Mixed Use Building Project of +/- 250,000 Our vision is to bring some modern Playa Del Carmen vibe to our town with this project. Architectural and Marketing Documents are required firstly to get some investors interested in funding the project and to get preliminary municipal approvals. The Zoning is already in place for the properties (DC1H - 6 Storey Mixed Use 90% Lot Coverage).

We are looking to outsource our estimating and CNC drawings for our Australian based kitchen manufacturing company to a freelancer. Experience in Cabinet Vision and the S2M centre and pricing matrix is essential

I need someone who is able to design kitchen cabinets with 2020 kitchen software designer, no Autocad

Double Howe (KK) Roof Trusses made out of 2 7/8 pipe 40-foot span Wall/Circular Column 4-inch x 12-foot pipe placed on pier columns Four 10 x10 garage doors all on the same side four walk-in doors

Need a file completed according to the Ontario building code and permit notes to be added.

I have a plan that I like, I just cant tell much from the internet and they aren't very forthcoming with information. I have attached what I've found

I need a permit-ready package for a 3-story garage + 1.5 bath addition to an existing property to replace an existing deck addition

We need an estimate for Floorplan for salon suites with a blank shell space. The space is 80×25 sq ft with 12 suites 10×11 and one double suite in the left corner by the entrance. A restroom and a small laundry room.

RESIDENTIAL HOUSE TOWN SHIP REVUE

Need home 3d plan for double story house. Also with interior design

Need an interior designer for my house

Interior designer required for my house

I have a space I want a design , modeling and rendering of an outdoor bar, I have an idea and nreference but need a creative architect to help bring it to life. If you have the skills and creative enough to do something awesome come on board

Interior Designing and Modular Home's

I need someone to draw a 5 bedroom luxurious duplex house plan for my client

We need civil engineer and site supervisor

I do have have house design that was modified. we i have 2d plans completed and now need 3d interior and 3d exterior design there is no 3d model so you will have to start from scratch

I want to design interior for outlet of home decor. I have shared a video in attachemts. Kindly suggest some idea based on it. Good idea and design will be awarded the contract. Need autocad design. Check instapage to understand product range. @decor de la belle

I want to get someone to help me with a few artist impression design and drawing of the narrow commercial building. The land size is 2500 square feet and can building up to 6 storeys. the first 3 floors is meant to be a car and motorcycle showroom and the rest is office space. I just need to have an rough idea what the building looks like.