Engineering Jobs

Hello, See attached for pur project that we are working on. Site plan is complete and we put together some quick elevations to give an idea of the design we are going for. The sellers need to approve our elevations before we can close on the land purchase so we want them to look really nice to give them no reason to turn our project down. The last attachment is the detail we are looking for in our elevations before we submit to the sellers for approval. Thanks!

I am looking for someone with extensive knowledge in electrical designing and ETAP (or similar) software related hand calculations. Specifically, I need someone who is well-versed in AC Circuits, has experience using ETAP or similar software and can provide calculations based on the designs. Need to understand how the work could be done by hand calculations and compared using ETAP.

I need a HVAC Engineering Calculation done on a residential unit.

I need some drawings created similar to this from some dimensions. I want it branded and in various levels of detail and aspects. Assembly exploded and in situ. There are quite a few and I want the renders to look lifelike. Samples of similar but these were created a while ago attached. I think there are around 100-150 , The brackets aren't that technical, but they need to be enhanced. This is what we currently have. Most products sit help to construct Unistrut type Channel frames.(Google is your friend) I would like entrants to submit a sample drawing to enter the competition (or 2 or 3) you decide, that will show us your capability and enable you to prove you can do the work. Remember that the project is much larger than the prize please! If you need any further detail, product...

Job Description: I need help designing a QAM RF simulation system in Matlab. The type of simulation I require is Single-User SISO for the output, and it should involve a fading channel for the input. Essentially, I want the output signal fed through a Rayleigh channel+SNR, then BER/demodulation/decoding of the signal should occur. My goal is to determine the transmission efficiency of the signal under different conditions. I am looking for someone who has experience and expertise in RF systems and software development. Familiarity with QAM and BER techniques, channel coding and modulation techniques and Matlab are all essential to this project. Accuracy and speed of delivery are paramount and skills such as algorithm optimization and multicore/multithreaded programming are desired.

Plan of 2bhk floor with attached bathroom and a with parking

I need python expert having good knowledge about implementing a speed sign detection and classification Bid if you have already worked on python

Mengganti existing flowmeter dengan brand yang sama yamatake the project is in indonesia, so i prefer local person.

I need an expert who is good at matlab and can do simulation

I want electric engineer to draft drawing for me

reverse engineering of small metal parts

What is the maximum amount of bins in the audio spectrum from 50Hz - 8KHz can an ESP32 run at 30 samples per second with an unlimited ADC speed in an ESP32 FFT driven software?

To prepare and compile comprehensive quotes and technical details from a list of vendors for a project based in UAE

Please have a look at the attached description. When finished, make a dummy entry. I'll conact you via private chat and you can share the files with me for checking. Thank you!

I need Structural engineer expert in STAAD pro to do calculations report of steel structure. I will share the details to the suitable engineer.

Need an expert machine learning engineer for a project. Please bid only if you are expert in Machine Learning

I have .pkt file which i have designed for my internship. I need some help with the configuraration .

I would like to add 2 skylights to the attic

I'm adding a garage to my property and need official drawings for the city to approve my project. I know the general size and objects I'm working around. I do need help to find a creative way to attach it to my current 1970's home. I'm located in Kansas within Douglas County, outside city limits. I'm sure as with any city they can be particular about codes/details.

We are looking for hydropower & irrigation civil design engineers for indian projects. Candidates should have a graduation in civil engineering followed by relevant design experience on irrigation or hydropower projects. Must be able to carry out structural as well as hydraulic design using excel sheets and / or software. Sample files below.

Generating a synthetic finger print using GAN algorithm provided input images and calculate k-anonimity for the generated images. (PAT GAN)

Need the urgent assistance of an expert in MATLAB with Application of Numerical Methods in Calculating the Depth of Submerged Ball in a Reverse Osmosis Water System., that has knowledge in developing numerical methods like “Newton-Raphson Method”, “ Finite Element Method in calculating this and will deliver to me both code and report for this...Thanks

1 Description The purpose of this laboratory exercise is to simulate the operation of a smart home device that moves in the space of an empty room. It starts from a corner of the room and its purpose is to draw its outline. As it moves in space it will receive values from a sensor that measures the distance of the device from an obstacle in front of it (here the sensor values will be measured by the Analog to Digital Converter - ADC). If the value is below the allowed (you set any value between 1-254) the device should stop and move left. The device will choose to move right if the right sensor shows that there is no wall to the right of the device (it will also be simulated with the ADC), i.e. the value is above the allowable. When it reaches the corner from which it started, the device ...

We are looking for a mechanical and/or structural engineer for a long-term collaboration and possibility for full time work, based in Indonesia. Our projects are on-going and exist mainly through skatesport facility construction. Profile; - Experience with light-weight steel construction projects. - Excellend English proficiency in both writing and speaking. - Relevant experience; at least 5 years. - Management skills; ability to lead a team. - Able to travel if needed, to quality control the project at the production facility. - Versatile work ethic; no 9-to-5 mentality. If you are interested in this offer, please respond with feedback on the points listed under "profile." Hourly or project-based prices are discussible.  We look forward to...

I am in need of a MATLAB Expert with expertise in Application of Numerical Methods in Calculating the Depth of Submerged Ball in a RO Water System. who has experience at an expert level. This person should be able to design effective solutions using MATLAB and have a good understanding of numerical principles and algorithms. I'm looking for a passionate, motivated and knowledgeable individual to help with this project.

Designing protective panels for vehicles. Proficient in Solid works, NDA required. Project is in West Florida. Initial effort starts soon, follow on likely.

Designing protective panels for vehicles. Proficient in Solid works, NDA required. Project is in West Florida. Initial effort starts soon, follow on likely.

Designing protective panels for vehicles. Proficient in Solid works, NDA required. Project is in West Florida. Initial effort starts soon, follow on likely.

I have included the Flanges drawing to build the Abaqus Model. The Flange connects the riser's bottom part to a spool. According to the attached spec, the only thing that needs to be modelled is both parts of the flange. I suggest building the left and right parts of the flange separately and then the gasket and stud bolts separately. Once done, then define a contact area to connect the parts. One can use Pre-load-tensioning for the bolts.

I need to install and run some scripts on my FIVEM GTA5 ESX server, please contact me if you can do that.

I am looking for a freelancer who can create the poster as per the comments.

Electrical engineer required with experience in solar systems. Need an analysis to be done of a home solar system and then tweeked for maximum efficiency and cost savings

Run Python code in Modelsim and run tests

Environmental Engineer to review and sign off on South Carolina Storm Water Protection Plans. Work would be on a project basis as work comes in. We have a team of engineers that are located in CO, but we need an engineer licensed in SC to review the books for accuracy and policy and then stamp.

I need a Servo drive system that can produce up to 100 lb. in. of torque, in very short but fast burst. Speed up to 6000 rpm, but normally will be only 1/4 to 1/2 rotation, and then reverse. These burst will only be for a few (

I have designed my monocarton. need someone to make a keyline based on specs in cdr

Mobile Robotic Matlab Implementation

Design 100KHz phase shift oscillator on multisim

Looking for a lead developer with snowflake expertise. Requirements 1. Design, develop and deliver end to end solution for snowflake integration 2. Design considerations while processing large amount of data in snowlfake 3. Need expertise in Snowflake listings, native apps and clean room 4. Knowledge about CDP, DSP, audiance segmentation, 1st party data is a big plus. 5. Readiness to work in team and good communication is a must.

I have already ANSYS SIMULATION results and neededmaterials(even video instruction). Need to make 1 presentation and research. I did all results only need to write theory part of it. I don't have time for it so if u can halp me with this Ill be grateful. Please check all the files and then if u can do it text me.

Our company is looking to create POC for a product recovery system for the food and beverage industry. We are expert in our industry and has been creating solutions for the past few years. Now the company is looking to move towards industry 4.0 and wants to create smart systems and solutions. Responsibilities: 1. Develop a customized PLC & SCADA system design that meets our specific needs and requirements. 2. Program and test the PLC & SCADA system to ensure that it is functioning correctly. 3. Provide training and support to our staff to ensure that the same runs on our systems as well as remotely. 4. Recommendations for mechanical and electrical elements to support the proposed design Requirements: Proven experience in PLC & SCADA design and implementation. Strong understan...

I am looking for a Fire engineer to design a fire strategy for a data centre compliant with UK regulation. I'm looking for someone that has already got the experience on writing fire strategies and knows the British regulation.

Hello, I'm looking for someone who will code a bootable program which can be run from a USB stick to get detailed hardware info of my PC. It should generate text report on a screen and if it's possible - write it as file to some folder on an USB stick it's running from. I have multiple notebooks Which I want to check for their specificity. The program must be lightweight and execute as fast as possible to save my time of entire process. It should be probably coded in C/C++ and use some FAST and LIGHTWEIGHT (so important) kernel, without loading unnecessary systems/libraries. On-screen report should be clear and easy readable. Also after saving this report on folder in USB it should be named with current timestamp and device model name (simple .txt file), USB device should...

I'm a business in need of experienced PLC Programmers for a freelance project. The ideal candidate will be highly skilled in PLC Programming, with the ability to demonstrate Integra 6 Certification and TIA Portal experience. The job will be conducted on a freelance you have the qualifications we are looking for and are up for the challenge, please apply now!

I am looking for PLC Programmers for multiple roles across EU and US, specific skills required so please do reach out with CVs, availability and rates. If you are looking to work with one of the biggest B2B recruitment solutions then we are the team for you

Need a guy to combine 3 things together. Has to play music, have LED surface - 15*30cm and 35C heating coils. Need to know power consumption - needs two power supplies: AC and DC (from power bank). Need someone from Eastern Europe - Time Difference is crucial - GMT +5 (for me), will have to arrange Zoom to discuss everything in details.

Looking for an engineer that knows how to change shape and adjust the focal length of the lens

I am in the ideas stage of starting a company so I'm looking for someone to draw a 3d cad design of my idea so I can present it to tech investors IM looking for someone who has vast experience in cad and engineering and manufacturing, would have to have a degree in engineering and have many years experience with that kind of thing and technology. I have made a prototype proposal , also the freelancer would have to be local to Gold Coast Australia since I'd have to be doing 1_1 with them to oversee the project

Preparing design and planning for complete forecourt controller over fuel dispensers and ATG systems for petrol stations, we have a project we want to prepare plans for implementation, the project consists of tracking the fuel from the refinery where the truck carrying the fuel till they are distributing the fuel at fuel stations, and monitoring the fuel distribution on the station (over fuel dispensers and ATG systems for petrol stations), and the monitoring should be online completely Note:'we need an Electonic and IoT engineer, as a project assistant, good Electronic knowledge and IoT is required, design and plan for new products or solutions, prepare a presentation, and the job will be from time to time'

Hello! I am in need of on-demand help with linear algebra assignments and questions. Specifically, I am looking for someone who can provide accurate answers and explanations to my questions for assignments. Freelancers should include their experience in the application, as that is key to being accepted. It would be much appreciated if applicants could provide examples of work they have completed in the past. If you think you have the necessary knowledge and skills to satisfy this project, I am looking forward to hearing from you! - For assignments from school - Answers to be written on paper and then you have to scan / upload it - I will let you know of the assignment dates in advance - If you are good with maths / linear algebra, this should be pretty easy for you - For some questions, i...