Engineer structural jobs

I'm seeking a professional editor to work on my manuscript's structure and flow. It's in a nearly final version, but I believe it could benefit from some substantive editing to enhance its overall structure and flow. Key Responsibilities: - Focus on improving the structure and flow of the manuscript - Ensuring the narrative is engaging and coherent Ideal Candidate: - Proven experience in substantive editing of manuscripts - Strong understanding of narrative structure - Ability to provide constructive feedback for improving the manuscript - Attentive to detail and able to work with a nearly finalized document - Excellent communication skills to discuss and implement changes The goal of this project is to fine-tune the manuscript to ensure it's engaging, coherent, an...

I am seeking a proficient environmental engineer who can design an efficient septic tank waste discharge system for my new small bungalow. This is a priority to ensure compliance with local regulations. Key project requirements: - Design an effective waste discharge plan using a septic tank system. - The bungalow will have two bathrooms, thus the system must cater for this volume. - The proposal must also have a clear, easy-to-follow layout understandable by contractors. Ideal Skills: - Environmental engineering. - Fluent in waste management regulations. - Previous experience designing septic systems for residential properties.

I'm in need of a structural design for my residential property. The structure should be designed to be one floor in height. I'd prefer a G+2 foundation type, that is, a structure with a Ground floor and 2 upper floors. Key Requirements: - Create a structural design for a single floor residential property - Implement a G+2 foundation (Ground floor + 2 upper floors) Ideal Skills and Experience: - Professional experience in structural design, particularly for residential projects - Proficiency with architectural design software to create detailed plans - Strong understanding of building codes and regulations, particularly for residential properties

...an experienced civil engineer or structural engineer to design a beam bridge that will support vehicle traffic and consider flood risk. Key Points: - The primary purpose of the bridge is to support vehicle traffic, so the design should focus on ensuring its structural integrity and load-bearing capacity. - Given the location, the design must also take into account potential flood risks. This involves selecting materials that can withstand flooding and incorporating flood-resistant design elements. -The bridge will span 12m and be able to carry a 30 ton load -Abuttments will need to be considered -Simplicity of design is preferred, e.g. four i beams of appropriate size with appropriate bracing Ideal Skills and Experience: - Proven experience in civil or ...

Hello AAStructural team! Here is the my quote for this structural engineer opportunity. I hope, I’ll delivery the best result . Sincerely Eng p shrijen

need a person with Azure Network Engineer Associate certificate

I'm looking for an experienced engineer or a professional proficient in CAD to create a detailed 2D and 3D design of my invention. The design must adhere to the specific dimensions and measurements I provide and must be of a quality that I can use to produce a prototype. Key Requirements: - Ability to create a detailed, realistic representation of the invention. - Proficiency in CAD software to execute the design. - Incorporation of specific dimensions and measurements provided by me. - Creation of multiple views of the design, including top, side, and front views. Ideal Skills and Experience: - Previous experience in CAD design, particularly in creating detailed and realistic designs. - Strong understanding of engineering principles to ensure the functionality and feasibilit...

I want to add 2 RSJ beams to my house to create a canopy above the proposed external terrace area. chem fix bolted back to the concrete structure of house. The house is a newly constructed single story property using ICF (insulated concrete formwork) with 150 mm thick concrete core and 80 mm extruded polystyrene on the outside and the inside. Generally, there is no rebar in the structure other than integral lintels and columns. The proposal is to add a minimal RSJ/UB steal structure to form a canopy structure. This new metal structure shall be fixed to the existing concrete structure by drilling and Chemfix with appropriate sized threaded bar, nuts and washes. It should be noted that 2nr concrete deep pad foundations have already been installed to align with the 2nr vertical RSJ/UB&rsq...

I'm in need of an AWS expert to set up EC2 instances and S3 storage for my project. Key Responsibilities: - Implement EC2 Instances: - Please note that I haven't specified the exact requirements for the instances, so your experience and expertise in setting up versatile EC2 instances will be highly valued. - Configure S3 Storage: - I'll be storing various types of data on S3 - Documents, Images, and Videos. Your task will be to set up the storage in a way that is efficient, secure, and easily scalable. Ideal skills: - Proficiency in AWS services, particularly EC2 and S3 - Experience in setting up EC2 Instances to meet varying requirements - Expertise in configuring S3 Storage for different data types - Understanding of security and scalability best practices in AWS ...

I'm looking for a proficient electronics engineer to design a custom circuit board. I'm unable to disclose details about its specific purpose and use at this time due to confidentiality reasons. Ideal Skills and Experience: - Expertise in circuit board design - Proficient in Electronics Engineering - Experience in custom board designs - Ability to maintain strict confidentiality Please only bid if you're comfortable working with limited project details and are capable of asking insightful questions to determine design specifics.

I am building a projector to expose a photosensitive-coated target with UV light. This projector must have an adjustable image output that varies from 0.1 reduction [image source to target image] down to about 0.02 reduction. At all image reduction settings, focus must be adjustable. The input image will vary from about 5mm to 1mm, and the output image will be from 1.5mm to 0.25mm. The light source will be LED, outputting 50watts of mid-UV light. This system is monochromatic. The light source will be a single frequency UV. The source image is a black & white 35mm slide. The output of this gig shall be a drawing/sketch of the relative positions of each optical element in relation to the light source [UV light], the source image/film and the target. For each optical element, there shal...

I am seeking an experienced automotive engineer with skills in CAD designs for trucks to create a detailed design for a tilt and slide rigid truck body. The primary use of the truck will be to transport robust goods such as heavy machinery and large vehicles as well as shipping containers. Therefore, the design needs to accommodate a weight capacity of 5-10 tons. While no specific materials have been selected for the project, the design should maximize usage of cost-effective materials that can support the mandated weight capacity. Key Requirements: - CAD design experience - Understanding of weight distribution in vehicle design - Knowledge of cost-effective, robust materials suitable for a heavy-duty truck Candidates with a background in automotive engineering and experience...

Please Sign Up or Login to see details.

I'm looking to have a relaxation space constructed in the form of a 16x20x4 inches lean-to patio. This patio will be attached to my two-story home, nestled neatly between tw...style of the house and provide a warm, natural aesthetic. - Design Element: I'd like to incorporate ceiling fans into this patio. These fans should provide both aesthetic appeal and practical function, helping to regulate the temperature and airflow, ideal for those warm, summer days. Experience with similar projects and a good eye for design are essential for this job. A keen understanding of structural integrity and the ability to seamlessly integrate the new construction with the existing house is crucial. Prior experience with wood construction and ceiling fan installations in outdoor spaces wou...

I'm seeking a seasoned drone engineer to enhance my drone's flight control system. You'll be predominantly focusing on: - Engineering the flight control system - Creating sophisticated algorithms for flight stability. Your expertise will elevate my high-end commercial drone stability to a whole new level. The ideal freelancer for this project should have: - Proven experience in drone engineering - Proficient knowledge in developing flight stability algorithms - A track record in enhancing high-end commercial drone stability. Make your mark on the drone space by joining our project! Let's add an impressive piece to our respective portfolios.

I am seeking a creative and resourceful video engineer who will incorporate different settings into my video project, specifically for indoor and outdoor environments. Indoor Scenes Requirements: - The video should feature in-house scenes, specifically, living room and bedroom settings. The ideal candidate should be skilled at creating compelling and realistic indoor scenes. Outdoor Scenes: - Along with indoor scenes, some parts of the video will be set outdoors. Specifically, the video should depict city streets and an open field with a tornado touching down. An experienced candidate with a knack for generating dynamic and extraordinary outdoor situations would be preferred. Throughout the project, an attention to detail and a flair for generating realistic indoor and outdoo...

I'm currently in need of someone specializing in 3D modeling using SketchUp to create a commercial design. The space we're working with is medium-sized, between 1000-5000 sqft. It's a commercial location and the design needs to reflect this. Ideal Skills: - Proficiency in SketchUp - 3D modeling and structural design - Previous work experience in commercial architecture This project will require effective communication and a keen eye for detail. If this is something you have experience in, I'd love to hear from you.

We are seeking a talented and experienced Blockchain Developer or a team of developers to upgrade our existing Roulette Game project to incorporate blockchain technology. The successful candidate(s) will play a pivotal role in enhancing the game's security, transparency, and overall user experience by implementing cutting-edge blockchain solutions. Responsibilities: Collaborate with the existing development team to understand the current architecture and functionality of the Roulette Game project. Analyze and identify areas of improvement in the game's security, fairness, and user experience. Design and implement blockchain-based solutions to enhance the game's functionality, transparency, and reliability. Integrate smart contracts into the game's logic to ensure fair...

...construction documents. Key Requirements: - **Building Permit Application**: The primary goal of these documents is to secure a building permit for the proposed structure. - **Intermediate Level of Detail**: You'll need to include sections and detailed floor plans to ensure the project can be properly reviewed and approved. - **3D Model to 2D Docs Conversion**: I also require 3D models, not for structural analysis but for visualization purposes. It's crucial that the plans are not just functional, but aesthetic and realistically represent the finished product. Ideal Skills & Experience: - **Architectural Drafting Experience**: Strong experience in creating detailed architectural plans. - **Familiarity with Building Codes**: Knowledge of local building codes a...

I'm looking for a skilled professional to customize existing roof trusses. They are currently in good condition, but I need them altered to accommodate a new vaulted. This will not require any changes to the existing roofing material. Key Responsibilities: - Modify existing roof trusses for a new roof shape....for a skilled professional to customize existing roof trusses. They are currently in good condition, but I need them altered to accommodate a new vaulted. This will not require any changes to the existing roofing material. Key Responsibilities: - Modify existing roof trusses for a new roof shape. Ideal Skills and Experience: - Previous experience with roof truss modification. - Knowledge of structural engineering principles. - Ability to work with precision and atten...

I'm looking to hire an experienced civil engineer or structural designer who can develop a high-quality strip footing design primarily for a residential building based on clay soil. Your job will specifically entail: * Producing a thorough, realistic, and functional strip footing design suitable for residential structures. * Accounting for the characteristics and limitations of clay soil in your design process. An ideal candidate for this project must meet the following requirements: * Profound knowledge and experience in structural designing and civil engineering. * A deep understanding of different footing designs, especially strip footing. * Experience in designing footings for structures built on clay ground specifically. * Familiarity with the standard c...

...existing design and fab files at hand, but the project has not achieved its full functionality. - Key Issues: The circuit is experiencing power supply issues presumed to stem from the Voltage regulator, compatibility issues with the microcontroller, and an unresponsive USB output. These are the primary targets for debugging and solution creation. - Ideal Expertise: I am seeking an experienced engineer knowledgeable in PCB design, solar power modules, and the SAMD51 microcontroller. The individual must have a track record of troubleshooting and resolving power supply issues, microcontroller mismatches and USB output problems involving solar-powered circuits. Proper debugging skills, efficiency in prototyping and insightful recommend improvements are critical. By undertaking th...

I'm in need of an experienced PBX / VOIP / SBC engineer who can address several issues with our customers phone systems system. The primary goal of this project is to troubleshoot and maintain current systems. Key Responsibilities: - Troubleshoot ongoing call quality issues - Investigate and resolve call drops - Address any connectivity problems Skills Required: - Extensive experience with Asterisk and other PBX systems - In-depth knowledge of VOIP network architecture - Proven track record in troubleshooting and maintenance Please only apply if you have a strong background in VOIP technologies and are confident in your ability to resolve issues.

I'm looking for a Professional Engineer (PE) with experience in creating site plans for residential development projects in Lumberland Town, New York State. Key Requirements: - The site plan is primarily for permitting purposes. - The project involves a single building; driveway; land clearing; septic; and well. The land is currently undeveloped and flat. Your deliverables would need to meet the following standards: - Comply with local zoning regulations. - Be detailed enough for the building department to approve the project. _ Must be Stamped by a Professional Engineer Lic. in NYS Experience with similar projects is preferred. A PE license is mandatory for the sealing of the site plan. Please include any relevant samples or references in your bid.

I'm in need of a versatile data engineer who can tackle various aspects of data analysis, AI development, and data engineering. - The ideal candidate should be proficient in Python and knowledgeable about Machine Learning algorithms, as these will be crucial to the AI development aspect of the project. - Sound experience in working with structured databases (e.g., MySQL, PostgreSQL) is essential. Introduction: Join our team as a Data Engineer, where you'll have the opportunity to contribute to cutting-edge projects and drive significant advancements in data analysis and machine learning. We are looking for a highly skilled professional who thrives in a dynamic environment and is passionate about transforming large volumes of data into actionable insights. Respons...

...Incident resolution by e-mail and videoconference our Red Hat Enterprise Linux systems. Key Requirements: Certification in: Red Hat Certified Engineer (RHCE) Red Hat Certified System Administrator (RHCSA). Ideal Skills: - Proven experience in Red Hat Enterprise Linux system upgrades and maintenance. - Strong troubleshooting and problem-solving skills. - Spanish language skills would be an asset. It is a project to provide technical support in installation and administration of RHEL 9. Duration 2 months. Incident resolution by e-mail and videoconference. About 20 hours. It is mandatory as a requirement the Certification in: Red Hat Certified Engineer (RHCE) and Red Hat Certified System Administrator (RHCSA). Spanish language skills are a plus. In your proposal, plea...

...properties of the wing • Assessment of the loading conditions on the wing Throughout the project, use of Creo 3D modeling software is mandatory for producing solid or shell elements of the wing. Limited analysis of the results will also need to be performed on Matlab, thus familiarity with this software will significantly enhance your suitability for the project. I undeniably value expertise in structural mechanics, especially as it pertains to aircraft. A good working knowledge of Creo and basic proficiency in Matlab are critical. Efficiency, accuracy, and attention to detail will greatly determine project success....

I am in need of a skilled food and beverages engineer who specializes in food processing to work on an exciting project in Saudi Arabia. The primary goal of the project is to assist in expanding our business by opening new branches. To do this, I need a professional who can help in the following areas: - Developing standardized recipes: The freelancer should be skilled in creating standardized recipes that can be replicated across multiple locations. These recipes should be not only delicious but also cost-effective and scalable. - Scaling up production capacity: The selected individual should have experience in increasing production capacity without compromising on the quality of the food. They should be able to design and implement production processes that can meet the demands o...

Hi Yan H., I noticed you posted a following project ( https://www.freelancer.com/projects/software-architecture/Software-Engineer-38076636/details )

I am looking for a developer who can build Saas app for my business

Please Sign Up or Login to see details.

I'm looking for a highly skilled network engineer with extensive experience with Cisco Packet Tracer, specifically in implementing complex network security measures such as network routing, VLAN configuration, firewall setup, VPN, assigning IP addresses and implementing network-based firewalls. The ability to successfully ping is crucial. The right candidate must also be well versed in the Open Shortest Path First (OSPF) for routing protocols. Your role will involve: - Designing and implementing complex network models - Configuring OSPF as the routing protocol - Assigning IP addresses across all devices - Installing and setting up firewalls to protect the network - Configuring VLANs to segment network traffic - Ensuring successful ping across all devices - Setting up VPN for...

We currently have a pipeline in place utilizing Google Cloud Voice, but we aim to substitute it with a local solution. The replacement must offer minimal latency, support interruption, and have the ability to differentiate between speakers. This transition is essential for a product feature wherein the embodied AI exclusively responds to recognized or registered speakers. Additionally, we require interruption functionality so that the AI remains attentive, ready to pause and process incoming information whenever a registered user contributes relevant input to the conversation.

I'm in need of a structural engineer who can carry out a comprehensive structural analysis for my upcoming single-family home project. Key Project Details: - Type: Residential building - Specific Services Required: Structural analysis - Size & Scale: Single-family home Key Responsibilities: - Conducting a thorough structural analysis of the building to ensure it meets safety standards and can support its intended purpose. Ideal Skills and Experience: - Proven experience in structural analysis for residential buildings. - Extensive understanding of the principles of structural engineering. - Proficient in relevant software and tools for conducting structural analysis. - Excellent problem-solving and analytical skills to ide...

I'm looking to improve the SEO of my website to boost organic traffic which subsequently increases sales. Specifically, I need assistance in optimizing the following areas: - Content: Develop engaging content which includes keyword optimization, and ensuring relevancy to boost search engine rankings. - Website Structure: Enhance both technical and on-page SEO. This includes structural improvements which make the site easier to crawl, and improvements to site metadata. - Link Building: Improve both inbound and outbound links to establish the authority of my site. The primary target audience is local customers. Therefore, it would be advantageous if you have experience in local search optimization. Your primary goal will hinge on increasing visibility in local search results, t...

...analyst to assist with a complex 3D structural analysis project for my bachelor's degree project. The materials involved in this project include polymers, reinforced concrete, and CFRP. Key project details: - Type of Analysis: The task involves performing structural analysis in Abaqus. - Material Specifications: The analysis will be conducted on a combination of polymers, reinforced concrete, and CFRP. - Dimensions and Geometry: The structure is 3D in nature, so proficiency with 3D structural analysis in Abaqus is a must. The ideal freelancer for this project should have: - Proven experience in conducting structural analysis in Abaqus. - Proficiency in handling materials like polymers, reinforced concrete, and CFRP. - Strong understanding of 3D stru...

I'm looking for an AI data engineer to assist with a finance project. The primary goal is to work on customer segmentation utilizing various data sources. Key Responsibilities: - Develop and implement a customer segmentation strategy based on the data sources provided (Social media analytics, Transaction records, Customer feedback). - Utilize AI techniques to identify patterns and trends in the data that can be used for customer segmentation. Ideal Skills and Experience: - Strong background in AI data engineering, specifically within the finance industry. - Proven experience with customer segmentation projects. - Familiarity with integrating and analyzing social media analytics, transaction records, and customer feedback. - Excellent understanding of AI techniques for data a...

...skilled Mechanical Engineer with expertise in light steel construction to join our team. The ideal candidate will be responsible for assisting with project design and conducting various calculations for transportation and container fitting of the product. This individual will collaborate closely with our in-house engineer to achieve common goals and deliver high-quality results. Responsibilities: - Assist in project design and development processes - Conduct calculations for transportation and container fitting of products - Collaborate with the in-house engineer to ensure project success - Provide technical expertise and support throughout the project lifecycle - Ensure adherence to industry standards and best practices Requirements: - Proven experience as a Mech...

I'm in need of an experienced freelancer who can provide structural analysis for an industrial building. Key requirements: - The structure being industrial in nature, the freelancer should have prior experience in analyzing industrial buildings. - The analysis will be focused on the steel components of the structure, so strong knowledge of steel properties and behavior under different conditions is crucial. The ideal candidate should: - Have a proven track record in structural engineering, with a focus on industrial buildings. - Be well-versed in the specific requirements and regulations that pertain to steel structures. - Be able to deliver a detailed report outlining the structural integrity of the building, potential risks, and suggestions for improvements i...

I need assistance with Staad Pro calculations for a specialized structure - specifically for a forklift fork. - The purpose of the Staad Pro calculations will be for ...specifically for a forklift fork. - The purpose of the Staad Pro calculations will be for both design verification and load analysis. - The anticipated size or scale of the structure is equivalent to a forklift fork. The ideal freelancer for this project should have: - Proficiency in Staad Pro software is a must. - Prior experience with structural analysis for specialized equipment would be a plus. - A strong understanding of mechanical and structural engineering principles. - The ability to deliver accurate and reliable results in a timely manner. Please reach out if you're confident in handlin...

I need a mechanical engineer with experience in product enhancement to improve the design of a wearable exoskeleton robot product. Key aspects to be addressed include: - Improving the adjustment and attachment aspects of the product, specifically in relation to Straps and fasteners, Joint movement range, Comfort padding, IP65 rating, Battery pack integration, Electronics and wiring integration, Adjustment to waist width and depth. Ideal skills: - Strong mechanical engineering background - Experience in product development - Proficiency in working with wearable technology products is a big plus - Knowledge in ergonomics, performance enhancement, and aesthetics - Ability to understand and meet user needs through custom adjustments I'm looking for someone who can combine ...

I'm in need of a skilled engineer with experience in Abaqus software for a detailed soil structure analysis with a focus on structural design. Key Requirements: - Proficiency in Abaqus software specifically for soil structure analysis - Prior experience in detailed soil structure analysis for structural design The task involves producing a comprehensive analysis report with detailed data relevant to the structural design. Your understanding of geotechnical properties, slope stability, and bearing capacity will be crucial in this project. The ideal freelancer for this task would have a background in civil engineering or a related field. A keen eye for detail and the ability to translate raw data into actionable insights is paramount. If you're confi...

Hi there, I’m Ahmed Alaa the senior mechanical engineer. I’m ready to help you make: ✨3D model with fully define 2D working drawings. ✨ Full design calculations. ✨ BOM with all selected material and the website to be easy to buy. ✨ DXF files for Lasser cutting machines to be easy for manufacturing. ✨ High-quality Rendering of realistic pictures for presentation and marketing. if needed I’m excited to work with you on you and deliver the best results possible. I’m waiting for your message.

Position: Mobile React Native SDK Engineer We are seeking a skilled Mobile React Native SDK Engineer to join our team. In this role, you will be responsible for establishing integrations with new retailers, as well as maintaining existing connections. You will play a crucial role in making decisions regarding our system architecture, schema, and API’s to enhance our overall user experience. Key Responsibilities: - Collaborate closely with the founders, project managers, and designers to drive product roadmaps and address business challenges effectively. - Develop and uphold our SDK utilized in third-party React Native, iOS, and Android applications. - Conduct reverse engineering of public web APIs and manage authenticated accounts programmatically. - Make strategic d...

I'm in need of a structural analysis expert who can help me analyze a small retreat home using Spacegass. Key Responsibilities: - Conduct a thorough structural analysis of a small retreat home, focusing on its stability and load-bearing capacity. - Utilize Spacegass proficiently to model the structure and simulate various loads and environmental conditions. - Provide detailed analysis reports with recommendations for necessary improvements or adjustments. Ideal Candidate: - Proficient in structural analysis, with specific experience in using Spacegass for similar projects. - Good understanding of static analysis principles and their application to small residential structures. - Knowledge of materials and constructions techniques suitable for a small retreat ho...

As part of our initiative to boost sales, I'm in need of a professional who can engineer and implement a robust lead generation strategy. Key Responsibilities: - Focus on generating high-quality sales leads in the technology industry. - Utilize content marketing as the primary lead generation method. Requirements: - Proven experience in lead generation, specifically targeting the technology sector. - Expertise in content marketing and its implementation for lead generation. - Ability to analyze and optimize lead quality and conversion rates. Ideal Candidate: - A professional with a solid background in digital marketing, particularly lead generation in the technology industry. - Previous track record of successful lead generation campaigns. - Strong analytical skills to meas...

I require a skilled network engineer for setting up and configuration of Ubiquiti UDM/switches for a wifi network. I'm looking for support in the following tasks: - Pre-configuration of UDM/switches - VLAN setup: A total of 3 VLANs need to be configured. Each VLAN will serve a specific function including employee devices connection, guest Wi-Fi access, and security devices connection. - Firewall configuration: You'll also need to configure the firewall for optimal network security. Post installation, remote support may be needed if any issues occur. The ideal candidate would have comprehensive experience with Ubiquiti products and UDM/switch configurations, specifically with VLAN and firewall rules. A solid understanding of network security and quality service s...

I'm looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Qualifications: -must have Distortion Analyzer, frequency sweeps -be able to build a prototype board totally functional -Simulate Analog / Digital signals Regarding hardware Cflash Audio Player using AAC codec Full prototype hardware to be shipped to US Audio player will use CFast card via SATA (not USB) and play audio files using AAC codec DDDAC1794 circuit Dual Dedicated PCM clocks via TCXO 44.1 khz and 48 khz auto select MUSES IC attenuator Steel enclosure (pick something from China but big enough to support batteries) RCA output Remote

I'm searching for an experienced engineer, preferably with a niche in door/pocket door design, to develop a high-quality wooden/aluminum pocket/cavity door. The project requires: - An in-depth understanding of working with wood material - Specialized skill to incorporate a feature that allows one side of the cavity to hold up to 70kg/m2 of cladding. - The capability to design a cavity to be within 92mm stud size to support the cladding weight. Please only bid if you have prior experience in door design and engineering, as you will be expected to demonstrate a high level of craftsmanship and innovation in the final product.

I need a skilled structural engineer to help me design a post/beam partially open/partially closed barn in Colorado. This is an equipment housing unit/work/storage space, and I'm looking for a durable and reliable structure that can withstand Colorado's climate for years to come. Would like to use as large or spans as possible in a post and beam manner with local species of Engleman spruce (standing dead), and existing standing seam metal roofing materials to form the shape of the building. -Looking for creative and efficient perspectives Key requirements: - Design and plan a large open barn, over 1000 square feet, to house my equipment/partially work from (small slab) - The barn will be in Colorado, thus the design should be suitable for the local climate - A pre...