Industrial design jobs

...verifying a residence existence through visual data by conducting a site visit to ensure that we provide reliable and accurate information to our client. JOB DESCRIPTION: • Take pictures of the residence and its vicinity per Confirmis’ standard operating guidelines. • Take picture of the surrounding area and provide observation about the residence REQUIREMENTS: • Must be living in (or nearby) Industrial Dorchester, Washington, NE 68068, USA • Has a camera or phone/tablet of quality with a camera, internet access • Must be available during business hours (9 AM - 4 PM) on working days Please see the attached file for the site visit guidelines. You are only required to deliver the pictures, video & observations and are not expected to assemble ...

...verifying a residence existence through visual data by conducting a site visit to ensure that we provide reliable and accurate information to our client. JOB DESCRIPTION: • Take pictures of the residence and its vicinity per Confirmis’ standard operating guidelines. • Take picture of the surrounding area and provide observation about the residence REQUIREMENTS: • Must be living in (or nearby) Industrial Park Drive, Blair, Nebraska, USA • Has a camera or phone/tablet of quality with a camera, internet access • Must be available during business hours (9 AM - 4 PM) on working days Please see the attached file for the site visit guidelines. You are only required to deliver the pictures, video & observations and are not expected to assembl...

****** Milestone-Based Contract ****** IMPORTANT: NO PLACEHOLDER BIDS. Generic automated proposals will be immediately declined and reported. To prove you have read and comprehended the complete engineering scope, your proposal MUST start with the exact phrase: HARDWARE-EXPERT --- PROJECT CONTEXT --- We are developing, an industrial-grade, 4-layer ESP32-S3 electronic system designed for continuous 24/7 outdoor operation (-10°C to +65°C ambient, up to 95% RH). NOTE: The schematic architecture and initial KiCad layout already exist (~80% complete). This project is strictly for schematic audit, protection/sensor circuit integration, PDN electrical simulation, 4-layer PCB optimization, 3D CFD thermal validation, and generation of a zero-error production release package. --- ...

****** Milestone-Based Contract ****** IMPORTANT: NO PLACEHOLDER BIDS. Generic automated proposals will be immediately declined and reported. To prove you have read and comprehended the complete engineering scope, your proposal MUST start with the exact phrase: HARDWARE-EXPERT --- PROJECT CONTEXT --- We are developing, an industrial-grade, 4-layer ESP32-S3 electronic system designed for continuous 24/7 outdoor operation (-10°C to +65°C ambient, up to 95% RH). NOTE: The schematic architecture and initial KiCad layout already exist (~80% complete). This project is strictly for schematic audit, protection/sensor circuit integration, PDN electrical simulation, 4-layer PCB optimization, 3D CFD thermal validation, and generation of a zero-error production release package. --- ...

We are seeking a business development professional under a fixed-rate, conversion-based compensation model. This means compensation will be based on successful client conversion rather than a fixed monthly fee. Our company specializes in vision systems, MES, Digital Andon, web development, software development, and Industry 4.0 solutions for automotive, healthcare, and industrial leaders. Examples of successfully converted clients include Tata Motors Ltd. (via an authorized partner), Morris Garages (MG), Wonderline Pvt. Ltd., Pratik Engineering Co., and GlowTap. The arrangement involves agreeing on a mutually decided percentage of the total project value, payable upon successful client/project conversion and confirmation. If this model aligns with your expertise, we will share mo...

FREELANCE BRIEF Archistar Master Plan Options — 3D Modelling 16–28 Blueridge Drive, Dubbo NSW Prepared by Work Rest Play Here · 16 August 2026 Overview Work Rest Play Here holds a group of adjoining industrial lots along Blueridge Drive, Dubbo NSW, numbered 16 through 28. We need a freelancer to build this site in our Archistar account, place the existing constructed buildings and the already-approved future buildings on it, then produce options for extending the community title subdivision across the lots that are still undecided. This project is referred to internally as “Lease Friend Master Plan Options.” Scope of Work 1. Kickoff briefing (20 min, Teams/Zoom) — A short call at the start to walk through the plans, the site and the goals for t...

I’m refreshing the visual identity of NORDIQ Technology and need a standout logo that instantly communicates our Nordic roots and our expertise in offshore, energy and marine technology. The company brings together specialist capabilities within engineering, product developme...intelligence. Norwegian technology. Built for demanding industries. Deliverables I’ll need: • Primary logo in vector format (AI, EPS, SVG) • Horizontal, stacked and icon-only variants • CMYK, RGB and monochrome colour files • A brief style sheet outlining colours and typography I’ll review concepts for clarity at small scale, impact at large scale, and overall fit with a high-tech, Norwegian industrial brand. Let’s create a logo that feels as innovative a...

...working prototype into a compact, production-ready industrial PCB. The existing electronics and firmware architecture are already functional. The selected engineer will receive detailed schematics, connection information and additional technical documentation after selection / NDA. The main task is **hardware miniaturization, RF design, schematic design and PCB layout**. ## Main Hardware Requirements The PCB will include: * 4x compact ESP32-S3 IC implementations * 4x independent 2.4 GHz RF sections * Wired internal communication between the four ESP32-S3 devices * LTE connectivity * 433 MHz RF section * 2x compact relays * Protected digital/sensor inputs * Wide-input AC/DC power supply * USB-C programming/debugging * Compact industrial design ## ...

I am looking for an experienced Mechanical / Mechatronics / Product Development Engineer to perform an independent engineering feasibility audit of a compact device that combines controlled low-temperature drying and subsequent fine grinding of tablets or similar safe test materials. This is not simply a CAD, rendering, or industrial-design project. I already have several preliminary concept designs, but I do not want an engineer to simply convert them into CAD or confirm that they “look possible.” I need someone who can critically evaluate the physics, mechanics, airflow, heating, grinding, powder handling, cleanability, safety, manufacturability, and cost. If my current concept is too complicated, expensive, unreliable, difficult to clean, or mechanically in...

I'm seeking a skilled designer to create a fully automatic spot welding machine in AutoCAD. Key components to include in the design: - Electrode holder - Foot pedal - Control panel - Additional components as guided Key specifications to be defined: - Current output - Cycle time - Material thickness capacity - Further details can be discussed via call or in person Ideal skills and experience: - Proficiency in AutoCAD - Experience in designing welding machines or similar industrial equipment - Strong understanding of welding machine specifications and requirements - Excellent communication skills for collaboration and discussion Please provide samples of previous work and relevant experience.

...directions for end users. • Troubleshooting notes (e.g., how to correct haziness or fragrance fade). I have access to standard raw materials and mixing equipment, so advise me on any specialty chemicals or emulsifiers I should source. Once I verify lab-scale performance, I’ll scale to pilot batches; your support through that transition will be appreciated. If you have developed other household or industrial cleaning concentrates, please share a concise summary of your results. I am ready to move forward as soon as I find the right formulation expert....

...explain in English what you’re doing, as if you were teaching someone. The recordings will be captured through the client website/application that will be shared with you during onboarding. Example Recording Activities You may be asked to record activities such as: Cleaning your home Washing dishes Repairing a bicycle Gardening DIY repairs Setting up electronics Workshop activities Warehouse or industrial tasks And many other everyday activities The goal is to capture natural first-person interactions with continuous English narration while performing these activities. Recording Equipment Recording must be completed using a supported smartphone mounted on a head mount. If you do not already have a head mount, you may need to purchase one. Both hands must remain visible...

I need a dependable, long-term partner based in Bangalore, India, who can supply various used and waste oils in bulk at competitive rates. I buy directly from collectors, recyclers, industrial sites, garages, marine operators, and any other licensed waste-oil handlers able to meet regular demand. Oil grades in scope: • Used Engine, Hydraulic, Lubricating, Transformer, Cutting, Gearbox & Transmission Oils • Heavy, Medium & Light Fuel-oil sludge, tank bottoms, slop / bilge oil and similar residues Quality expectations: The oil you offer should be high quality with minimal contamination. If you also handle moderate-grade material let me know, but my immediate priority is product that already falls in the cleaner category. Typical volume: I am ready to start with ...

...configuration and customization * Data migration * Implementation * Integration and API development * AI/IoT integration * Training and technical support You focus on sales. We handle technology and delivery. Who We’re Looking For Ideal partners have: * B2B sales or business development experience * Existing relationships with manufacturing companies * Experience selling ERP, SaaS, IT or industrial technology * Strong access to business owners and decision-makers * Ability to generate and qualify their own leads * Good understanding of manufacturing business processes ERP experience is an advantage, but not mandatory. Commission-Based Partnership First-year contract value Partner commission Up to ₹5 lakh. 10% ₹5 lakh – ₹10 lakh. 12% ₹10 lakh – ₹25 la...

I have a mature consumer product that sells steadily but doesn’t stand up to real-world abuse as well as it should. My goal is to rethink the mechanical design so the next production run is markedly tougher without driving unit cost through the roof. Here is what I need from you: an industrial mechanical designer with at least 7–8 years on the shop-floor side of things—someone who instinctively balances DFMA principles with practical drafting skills. You will start by reviewing the current CAD set and recent failure data, then propose design changes that extend service life, reinforce high-stress areas, and simplify assembly where possible. Key expectations • Dive into the existing 3D model (SolidWorks, Creo, or comparable) and identify weak ...

Amar Industries is an India-based manufacturer of forged components, CNC-machined parts and precision engineering components. We are looking for an experienced International B2B Sales Specialist who can help us find and approach genuine overseas buyers. Target Markets USA, Canada, Europe, UK, Middle East & Africa Target Buyers Automotive companies & suppliers OEM manufacturers Industrial equipment manufacturers Machinery manufacturers Engineering companies Importers & distributors Forging & CNC machining buyers What You Will Do Find qualified international B2B prospects Identify decision-makers and purchasing contacts Contact prospects through email, LinkedIn and other channels Introduce our manufacturing capabilities Generate genuine RFQs and en...

I need a clean, modern-looking static website to showcase our new manufacturing company. The emphasis is on visuals: high-quality product images, short manufacturing videos, and supporting infographics should drive the story far more than long blocks of text...Embedded product image gallery, video sections, and infographic slots ready for quick content swaps. • Contact form with name & email fields; successful submissions arrive instantly at our designated address. • All source files plus brief deployment notes so we can drop the build onto our existing hosting with minimal fuss. I will review recent projects you have completed—especially any in the industrial or manufacturing space—before making a final decision, so please share links that demonstrate...

I need a complete electric-motor design tailored for heavy-duty industrial machinery where sustained, high torque is the overriding requirement. The project covers the full engineering cycle—from concept sketches and electromagnetic calculations right through to detailed 3D CAD models, winding data, thermal analysis and a bill of materials ready for prototyping. Key objectives • Deliver continuous high torque at typical industrial supply voltages • Maintain reliability in harsh, high-duty-cycle environments • Meet common efficiency standards—compactness and energy savings are welcome bonuses, but raw torque matters most Your package should include: 1. Electromagnetic design files (Maxwell, Motor-CAD or equivalent) with clear ...

I need comprehensive design criteria for 13-exterior electrical racks and 13-30' to 50' tall antenna bases with concrete working pads at the base of the Electrical Racks. Requirements: - Install in industrial zone of Wichita Falls, Texas - Antenna bases primarily for communication purposes - Must adhere to regional standards and regulations Ideal Skills and Experience: - Experience in designing for industrial environments - Knowledge of communication antenna requirements - Familiarity with Texas regional construction standards

I need comprehensive design criteria for 13-exterior electrical racks and 13-30' to 50' tall antenna bases with concrete working pads at the base of the Electrical Racks. Requirements: - Install in industrial zone of Wichita Falls, Texas - Antenna bases primarily for communication purposes - Must adhere to regional standards and regulations Ideal Skills and Experience: - Experience in designing for industrial environments - Knowledge of communication antenna requirements - Familiarity with Texas regional construction standards

...from you. Market Research Scope – PVC Pipes & Fittings (Nigeria) Products: UPVC, CPVC, SWR, PVC AGRI PIPES AND FITTINGS Target States: - Lagos State - Oyo State I require detailed market research for PVC pipes and fittings in the above two states covering the following: 1. Market size and demand for PVC pipes and fittings. 2. Major applications (residential, commercial, industrial, agriculture, water supply, drainage, etc.). 3. Most demanded pipe and fitting types, sizes, pressure ratings, and specifications. 4. Quality standards preferred by customers (ASTM, BS, ISO, SON, etc.). 5. Pricing at every level: - Importer price - Distributor price - Wholesaler price - Retailer price - Contractor/project price - End-...

Looking for an Industrial Designer / Product Designer – Consumer Electronics We are developing INkey, a new productivity-focused Android smartphone with a physical QWERTY keyboard. We are looking for an experienced designer who can take our existing product concept and develop the industrial design and detailed CAD for a physical prototype. The freelancer must provide the original CAD files upon completion (must for release for final Payment).

...* Competitor analysis * Organic search rankings 4. Lead Generation Strategy Develop a comprehensive strategy for generating qualified commercial leads. We are particularly interested in reaching decision-makers such as: * Property managers * Condo/HOA management companies * Facility managers * Commercial property owners * Construction companies * Home builders * Municipalities * Offices * Industrial facilities * Retail businesses * Childcare facilities * Hospitality businesses * Event venues * Other organizations requiring ongoing commercial cleaning or facility services We are interested in strategies beyond Google Ads where appropriate, including organic search, LinkedIn, email marketing, outbound campaigns, remarketing, referral strategies, content marketing and other pro...

I need a comprehensive arc flash study for our industrial plant to ensure compliance with safety regulations. Requirements: - Conduct detailed analysis of electrical systems - Identify potential hazards and risks - Provide recommendations for safety improvements - No existing documentation available; you'll need to create accurate records Ideal Skills and Experience: - Expertise in arc flash studies - Strong background in industrial electrical systems - Knowledge of safety regulations and compliance - Ability to develop documentation from scratch - Relevant certifications in electrical safety and analysis Please provide a detailed plan and approach.

...a palm-sized device that grips the lid firmly, distributes hand pressure evenly, and provides just enough flex to avoid damaging the cap or the user’s wrist. Here’s what I need from you: • Industrial-grade 3D design files (STEP or similar) that capture the tool’s ergonomics, grip texture, and optimal rubber durometer. • Material and manufacturing guidance—recommend an elastomer blend that balances durability with a non-slip feel, and outline a realistic path to low-volume moulding or rapid silicone casting. • One physical prototype shipped to me for hands-on testing, along with notes on any design tweaks you’d suggest after fabrication. I’ll supply hand measurements, photos of typical jars, and feedback at ev...

Brief overview Logo & Business Card for Trucking Company Overview I & I Brothers Express LLC, a family-owned trucking company, needs a new logo and business card design to enhance our brand identity as an asset-based carrier. Scope of work - Design a unique logo incorporating company values and service type. - Create a business card layout incorporating contact details. - Ensure design elements align with the trucking industry theme. References I & I Brothers Express LLC is an asset-based interstate trucking carrier based in Roseville, CA. Founded in 2013 by two brothers, (Ion and Igor). We own our fleet and employ our own drivers. We are a carrier, not a broker. We haul general freight across 48 states for manufacturers, distributors, and 3PLs. USDOT 2389...

I need a seasoned business-development professional to open doors for CordovaTech in the automotive, healthcare, and industrial arenas. Our core strength—and therefore your first talking point—is advanced vision systems that integrate seamlessly with MES, Digital Andon, and wider Industry 4.0 architectures. Here’s what success looks like to me: you investigate the market, single out the right decision-makers, and turn introductions into concrete partnership agreements or expanded scopes with companies we already serve. You will rely on your own network, complemented by focused research and crisp business analysis, to keep our sales funnel steadily fed. Key milestones and deliverables • Qualified partner or client list with contact details and basic need an...

I’m outfitting a commercial space and want it to communicate a raw, industrial vibe from the moment someone walks through the door. Concrete textures, exposed services, steel, and a muted, masculine palette are the look I’m after—not polished corporate chic. Even though it’s a business premises, the layout is broken into zones that mirror residential functions: • a relaxed lounge-style area (my “Living room”) • an open pantry/café corner (“Kitchen”) • a set of quiet retreat pods (“Bedroom”) • one additional zone I’ve labeled “Bhaskar,” which is essentially a flexible breakout space. Your task is to translate those four zones into a cohesive industrial interio...

...Professional slide design Visual storytelling Infographics Process diagrams Technical illustration refinement Consistent branding and formatting Creation of custom icons and graphics Enhancement of existing photographs and technical imagery Minimal animations (where appropriate) Important This is NOT a sales presentation. The presentation focuses on: Water infrastructure Asset management Water conservation Network isolation methodologies Operational efficiency Engineering innovation The final product should resemble a professional utility industry conference presentation rather than a marketing or product catalogue presentation. Deliverables Professionally designed PowerPoint presentation Editable PowerPoint source file Custom graphics and diagrams Consistent slide master/te...

I'm seeking a detailed virtual tour of our manufacturing unit. The tour will need to cover the following areas: - Production floor - Warehouse - Quality control lab Ideal skills and experience: - Expertise in creating immersive virtual tours - Experience with industrial environments - Ability to produce high-quality video and audio Please provide samples of similar work done.

I’m setting up a steady, month-to-month engagement with a seasoned Tekla Structures professional who can own the full detailing workflow on a series of industrial projects. Every month I’ll pass you new steel packages that need to move seamlessly from concept to fabrication, so I’m counting on your deep command of Tekla to keep the pipeline flowing. Scope of work – Build clean, well-organized Tekla models straight from my IFCs, sketches, or PDF mark-ups. – Produce all GA drawings, assembly drawings, single-part sheets, and NC/DSTV files ready for the shop. – Generate bolt and material lists plus any custom reports I request so purchasing can cut POs without delays. What I’m specifically after You’re a senior-level detailer wh...

...to brands like Airfoil. Design Requirements The logo must be versatile enough to work on vehicle signage, uniforms (embroidery), invoices, and warehouse signage. It should: Reflect our nature: Technical, industrial, and reliable. Style: Modern and sleek. Imagery: Incorporate subtle HVAC-related imagery, such as airflow motifs or mechanical components. Suggestion: You may want to explore using AAP as a possible logo mark or monogram within the design. Creative Freedom I am looking for your professional expertise regarding the color palette, typography, and layout. Please develop original concepts that stand out in the wholesale industrial market while maintaining a professional, dependable appearance. Deliverables Ideal candidates should have experience in ...

Project Overview We are an industrial process control hardware company currently operating on a legacy Joomla platform (). We are looking for an independent, highly skilled WordPress developer to build a clean, modern, and low-maintenance website. Crucial Technical Constraint: We require a site built strictly using standard, native WordPress tools (core block editor / Gutenberg and off-the-shelf, mainstream plugins). We will not accept custom-coded themes, heavily modified plugin scripts, or proprietary page builders. The site must be built so that standard WordPress core and plugin updates will never break custom code or crash the site. You will work directly with the business owner on a 1-on-1 basis. Key Scope of Work Selective Content Migration: Audit our existing Joomla conte...

...data by conducting a site visit to ensure that we provide reliable and accurate information to our client. JOB DESCRIPTION: • Take pictures of the residence and its vicinity per Confirmis’ standard operating guidelines. • Take picture of the surrounding area and provide observation about the site. REQUIREMENTS: • Must be living in (or nearby) the following address: Haean-ro, H-dong, Banwol Industrial Complex, Danwon-gu, Ansan-si, Gyeonggi-do, Korea • Has a camera or phone/tablet of quality with a camera, internet access • Must be available during business hours (9 AM - 4 PM) on working days Please see the attached file for the site visit guidelines. You are only required to deliver the pictures, video & observations and are not expected to as...

...verifying a residence existence through visual data by conducting a site visit to ensure that we provide reliable and accurate information to our client. JOB DESCRIPTION: • Take pictures of the residence and its vicinity per Confirmis’ standard operating guidelines. • Take picture of the surrounding area and provide observation about the residence REQUIREMENTS: • Must be living in (or nearby) Industrial Dorchester, Washington, NE 68068, USA • Has a camera or phone/tablet of quality with a camera, internet access • Must be available during business hours (9 AM - 4 PM) on working days Please see the attached file for the site visit guidelines. You are only required to deliver the pictures, video & observations and are not expected to assemble ...

I'm seeking an experienced PLC programmer to develop a program for Automation Direct PLCs. The primary task of this program will be motor control, essential for our machine control operations. Key Requirements: - Expertise in Automation Direct PLCs - Proficient in motor control programming - Experience in industrial automation, specifically in machine control contexts Ideal Skills and Experience: - Strong background in PLC programming - Familiarity with Automation Direct software and hardware - Previous projects involving similar motor control tasks Please provide samples of related work and a brief outline of your approach. Looking forward to your bids!

I need a full suite of fabrication-ready drawings for an industrial steel building. Every plan and detail must follow the latest AISC provisions so the shop and field teams can move straight from paper to steel without re-checking my work. Scope • Frame the entire structure in AutoCAD, laying out foundations, columns, beams, and roof members with coordinated gridlines and true-to-site dimensions. • Develop crisp connection details—this is where I need you to be meticulous—showing plates, welds, bolts, and anchor rods in a way that leaves no room for on-site guesswork. • Produce anchor-bolt settings, elevations, sections, and any special steel framing conditions that may arise. • Compile material and member schedules tied directly to your draw...

...hole clearance, and fastener access, so the part comes off the brake or laser without surprises. • Interference and alignment checks to confirm everything fits before it hits the shop floor. Deliverables • Native CAD model plus neutral STEP file. • DXF flat-patterns ready for CNC/laser cutting. • Fully annotated 2D drawings with critical dimensions, bend lines, and callouts. • A brief design note outlining material, finish, and any special assembly tips. Acceptance criteria 1. All features match my reference dimensions within ±0.2 mm. 2. Hole locations and cut-outs align with my PCB and connector layouts. 3. Flat-pattern geometry imports cleanly into a CAM package (no open loops). If you’re comfortable designing sheet...

We are seeking a Technical SEO & GEO Specialist to manage and optimize two B2B industrial WordPress/WooCommerce/Elementor websites targeting engineers and procurement buyers in the oil & gas, industrial, and manufacturing sectors. The role involves executing a detailed month-by-month roadmap focused on repositioning the sites from general e-commerce catalogs to engineering/OEM-supplier models with clean industrial branding and technical include fixing crawl errors, broken links, optimizing title tags, meta descriptions, schema markup, improving Core Web Vitals, and maintaining canonical/ hygiene. Additionally, you will implement Generative Engine Optimization (GEO) strategies to structure content for AI search engines like ChatGPT, Google AI Overviews,

...are maturing fastest and why these areas intersect. Here’s what the finished work needs to cover: • Current state-of-the-art and near-term roadmap for GenAI, LLMs, AI-specific hardware and enterprise AI adoption • Chip architecture evolutions, key foundry capacity shifts, GPU/NPU supply dynamics and the geopolitical pressures shaping the semiconductor chain • Breakthroughs in humanoid and industrial robotics, autonomy stacks, spatial computing interfaces and real-world deployment case studies • How cloud infrastructure, developer tooling and Big Tech strategies tie all of the above together, including any unexpected ripple effects on the wider software market Acceptance criteria • 100% original analysis with citations to reputable sources ...

...vanilla HTML/CSS and JavaScript, streaming live data from a Cognex industrial machine vision camera over WebSocket. While the socket connects successfully, packets occasionally arrive corrupted or out of order, which breaks the real-time charts. I need you to trace the exact cause of these data transfer errors, patch or rewrite the send/receive logic as needed, and add graceful handling for edge cases such as dropped frames or partial payloads. At the same time, I’d like the dashboard codebase tightened up for speed—bundling, minification, smarter asset loading, and any low-hanging DOM or rendering optimizations you spot. Project Background: This dashboard is for a manufacturing company who has purchased a Cognex Industrial Smart Camera which is used for ...

# Ongoing B2B Marketing & Content Specialist – Monthly Retainer ## About Splitforce Splitforce is an industrial workwear brand focused on innovative protective clothing for demanding industries including mining, oil & gas, utilities, construction, manufacturing and other industrial sectors. We are looking for an experienced, proactive marketing and content specialist to work with us on an **ongoing monthly retainer basis**. This is **not a one-off project**. We want someone who can become familiar with the Splitforce brand, products, customers and industries and take ongoing responsibility for helping build our digital presence, content and brand awareness. ## Scope of Work The successful freelancer will provide ongoing support across the following areas:...

Structural Steel Shed Fabrication Drawings Required (48m x 24m x 9m) Description We are...Information Building Size: 48m x 24m x 9m Structural System: Portal Frame Steel Shed Requirements Proven experience in structural steel detailing and fabrication drawings Experience with portal frame sheds and industrial steel structures Proficiency in Tekla Structures, AutoCAD, Advance Steel, SDS/2, or similar n Please Provide Examples of similar structural steel shed projects The objective is to produce a complete and accurate structural steel fabrication drawing package for a 48m x 24m x 9m portal frame shed, suitable for steel fabrication, procurement, and site erection. All available design information, structural calculations, and project requirements will be provided to the succ...

We are looking for an experienced structural engineer/FRAMECAD specialist to prepare the complete LSF framing design based on the attached architectural drawings for an industrial project in Samail, Oman. Scope of Work: 1. Administration Building 2. Main Warehouse / Industrial Hall 3. Guard House All buildings shall be designed using the FRAMECAD cold-formed steel framing system. Exclusion: The separate Storage and Toilet/Service Block located at the rear of the warehouse is entirely excluded from the scope. Required Deliverables: * Structural design and calculations * Complete FRAMECAD model * Wall and roof framing layouts * Panelization, bracing and connection details * Member sizes and schedules * Fabrication/shop and erection drawings * Material/steel...

I’m looking for a qualified electrical engineer to take my project from concept to a complete, permit-ready set of drawings. At this stage I only have the overall idea; there are no existing sketches or schematics you need to follow, so you’ll be able to recommend the best approach from the ground up. Here’s what I expect you to handle: • Discuss the scope with me (residential, commercial or industrial—still open) and establish the load requirements. • Produce a full set of single-line and wiring diagrams, panel schedules, load calculations and a bill of materials that meet the applicable NEC/IEC standards. • Include clear notes for lighting layouts, power distribution points and all branch circuits once we decide which areas I’m pri...

If you are an entrepreneur yourself, you are welcome to discuss cooperation. Job Title Remote Startup Founder for Online Pitch Event Job Description We organize global online innovation pitch events for industrial parks and startup competitions. We are currently seeking authentic overseas startup founders to deliver 10–15-minute online pitches in English via video call. 1. Conduct a complete project presentation remotely and participate in a Q&A session with the judges; 2. Provide a complete English-language business plan and presentation slides for review prior to the pitch; 3. Receive a fixed fee per session, payable after the event concludes; 4. Terms of Agreement: We may use de-identified project materials and recorded pitch videos for event promotion and industry net...

I recently vacated a rental home after documented mold concerns, rodent activity, water intrusion, and environmental testing. Before moving or handling my belongings, I need a qualified environmental/microbial consultant to review the lab reports already obtained...contents. A brief plain-language summary I can share with my mover, insurer, or contents restoration company. Clarification on whether a separate specialist is needed for asbestos, fiberglass, or rodent-related concerns. I can provide the lab reports, photos, and relevant background documents immediately. Please include your certifications or qualifications, such as CIH, CIE, IEP, microbiology, industrial hygiene, or related environmental assessment experience, and note any similar contents-contamination projects you hav...

I need specialized capacitive touch sensor cables for indoor use. Key requirements: - Manufacturing of touch sensor cables, specifically capacitive type. - Cables should be durable and reliable for indoor environments. Ideal skills and experience: - Expertise in sensor cable manufacturing - Knowledge of capacitive touch technology - Experience with indoor-use industrial standards and requirements Please provide samples of similar work and estimated delivery time.

Please Sign Up or Login to see details.

I need a seasoned engineer / industrial designer to translate my rough concept for a connected device into a fully-engineered plastic enclosure. The job centres on delivering a print-ready 3D model in STEP format that cleanly accommodates three off-the-shelf parts: weight sensors, a small LED array and a rechargeable battery pack. What has to happen • Layout the interior so each component seats firmly, with cable paths and strain relief designed in. • Keep external lines sleek and user-friendly; the finish must look consumer-ready, not just functional. • Recommend the most suitable plastic (and any inserts or gaskets) for strength, heat management and ease of manufacture, and flag any critical tolerances. • Document simple, repeatable assembly steps—...