Mp3 to arduino buzzer jobs
I am looking for a talented freelancer to build an ultrasonic sensor controlled automatic door system. The system will utilize an ultrasonic sensor to control the door, providing insight into the proximity and position of objects in the surrounding environment. The selected sensor for the system will be an ultrasonic sensor, which will provide the most accurate results for this application. The control system for the door will be an Arduino Board which will be used to program and interact with the sensor. The expected range of the sensor will be 0-5 meters in order to effectively monitor the environment and detect objects when the automatic door is in use. Please see for a similar project.
...someone to create an ongoing selection of Solfeggio Binaural Sound tracks. These tracks will be used for relaxation, improving focus, and reducing stress. I am looking for someone who can create original Solfeggio, binaural sounds using all 9 frequencies. 1. 396 Hz: Fear, guilt, and shame relief 2. 417 Hz: Facilitate changes, remove negativity 3. 528 Hz: Positive transformations 4. 639 Hz: Relationship, connection, compassion 5. 741 Hz: Self expression, finding solutions 6. 852 Hz: Awareness 7. 174 Hz: Pain relief * 8. 963 Hz: Intuition 9. 285 Hz: Regeneration I would like the sounds very similar to this: They must be created in such a way I can loop them. Looking for a 10-15 minute audio. If this is economical, I will continue to work with
I need a program where it has to monitor different CCTV camera feed and detects drowsiness or sleepy ness of the person and if he is sleeping for more than 10 seconds the program should send a signal to a buzzer which will wake him up and if he is sleeping for more than ten seconds it should capture a snapshot of the moment with a timestamp and store it and I also need it to send a signal to the admin if the buzzer goes off twice or more and I also need the program to detect the absence of the person and if he is missing from the frame for more than five minutes the program should ring a buzzer and notify the admin
Hello, I am designing a smart glove, in which I have a MAX30102 (heart rate, SpO2, temperature sensor) sensor in contact with the ind... However, this algorithm sometimes does not give accurate readings and does not consider the effects of motion artifacts. I researched algorithms for canceling motion artifacts for ppg signals, and I found that most of them use algorithm that are beyond my scope of understanding. Therefore, I want you to write an Arduino code that includes an algorithm to accurately detect heart rate, SpO2, and temperature using the MAX30102 sensor while walking or doing other physical activities. Also, the MAX30102 should be placed on the index finger, not other parts of the body. Thank you.
I am looking for an experienced developer to help me with a project that requires Arduino Due (slave) and/or Esp32 (slave) with communication to Comfortclick (master) (). via modbus TCP IP (). What I do require is the development of the code from scratch and you must bring me setting for comfortclick bOS to. The project should meet my exact specifications and be delivered on time. The right developer will have prior experience with this type of work, have driver knowledge and have the right coding skills. If you think you have what it takes for this project, please apply. The code must be testing and working and delivered with comfortclick setting by picture, comfortclick have one free licence for use and
I am looking for an ESP32 firmware developer who is familiar with ESP-IDF to develop BLE communication between E600 smartband and ESP32 using C on ESP-IDF. I need the following data to be read (every 1 minute): Heart Rate, Blood Pressure, Body Temperature, Glucose and SpO2 (concentration of oxygen in the blood).
I am looking for a freelancer to develop an Arduino-controlled TENS primary function of the device is to provide pain relief and muscle stimulation. I am also looking for an Android app to control the device. The app should have intermediate features and design, including the ability to adjust the intensity and duration of the TENS unit. The project needs to be completed within one month, so I am looking for someone with experience in both Arduino and Android app development who can work efficiently to meet the deadline. I would like a GUI that shows a graphic representation of a body and the location of the TENS pads and the level of current going to each sector of the body. Additionally I want the ability to rep...
...group hosted inside telegram. Users share tracks of music by placing a link to them individually into the group. Normally these are just url links to Youtube. The order of those tracks being shared are important to me. So what I need is: 1. A robot or script to go from the first Youtube link posted, in my group in Telegram. Read the link & download the video from Youtube. (All other music shared from other hosting links shared can be ignored, by the scraper) 2. Each clip should carry then be saved with a unquie file name on my hard drive. For example 00001 [then the name of the clip itself], then 00002 [then the name of the file] and so on. They are about maybe 5000 tracks of music already shared. So I want to maintain the order in which the...
...Pyrkov, I am a composer, arranger, sound producer, sound engineer with world-class audio production quality.I would like to offer you cooperation in representing my interests in audio music and film music production.I have 25 years of experience in working and collaborating with major companies (including WALT DISNEY RUSSIA),Walter Afanasieff ,Kenny G ,I am engaged in one full cycle of audio production from the first note to the final top sound. I think I can be of interest to you.I will be glad to cooperate with your company. I also have experience in film production, I made music for an 8-episode TV series and a short feature film.I work in all musical genres, I am ready to cooperate. below is a brief description of me and examples of my work: ...
I would like you to setup the lvgl and port the initial sqare line design to the arduino framework. The hardvare is esp8266 and st7735 128x160 lcd without any touch input. Also it would be nice that the code would have as much coments as possible so I understand what line is doing what. The idea is to make an scooter/ebike controler that will interface with vesc based controllers. The actual interfacing and logic (backend, if it can be called like that :D) I can write by myself. But the lvgl part is quite daunting for me at the moment. So far I have made preliminary sqare line studio designof the gui. The gui will not have any buttons or methods of input. It will only display info from the esc and other components. The gauges and other indicators should have ...
...I need to use the programs in Java, processing or Octave/Matlab to prepare a narrative on digital waveforms, spectral analysis using the FFT and the Spectrogram to demonstrate your knowledge of how they work. Make sure that each plot can clearly illustrate the shape of the waveform, i.e. if you have to zoom in to get this, do so. A thick coloured block is not acceptable. The results from your plotting should be placed into a powerpoint presentation and along with the plot a sound file should be inserted into the page (it should be imported as mp3 to save space). The documents should also show on the following slide to each plot the programming scripts to generate the wave and its graph. The graphs should have titles, labelle...
I would like you to setup the lvgl and port the initial sqare line design to the arduino framework. The hardvare is esp8266 and st7735 128x160 lcd without any touch input. Also it would be nice that the code would have as much coments as possible so I understand what line is doing what. The idea is to make an scooter/ebike controler that will interface with vesc based controllers. The actual interfacing and logic (backend, if it can be called like that :D) I can write by myself. But the lvgl part is quite daunting for me at the moment. So far I have made preliminary sqare line studio designof the gui. The gui will not have any buttons or methods of input. It will only display info from the esc and other components. The gauges and other indicators should have ...
...looking for an IoT Specialist who can help me in my project. I need to provision an ESP32 via bluetooth from a Flutter mobile app. The provisioning must be done from the app only! I don't want the user to leave the app. The mobile app will try to connect to the ESP32 via bluetooth. After a successful connection, the app will send the ESP32 the WiFi Credentials of the home router which is the same router used by the mobile running the Flutter App. After the ESP32 receives the WiFi credentials, it will turn off the bluetooth and connect to WiFi. I would need the code for both ESP32 and Flutter app. Developer is not required to care about UI design, I only care about the code. Basic UI is enough. Required Languages: C++/Arduino...
I am looking for a freelancer who can develop custom OBD software for my Arduino-based project. The primary function of the software will be custom modifications. The software needs to be compatible with both CAN and K-Line communication protocols all other OBD protocols. Ideal Skills and Experience: - Proficiency in Arduino programming language - Experience with OBD systems and protocols - Ability to develop custom software for specific needs - Test the software using OBD simulators or real cars
.../ pytorch/ pandas Specialties in convolutional neural networks , data analyst/data manipulation / data scientist Additional abilities- should be able to replicate techniques presented in ML white paper More the experience the better Position is negotiable, full time/contract CAD: Sketching, part making, assemblies, moving parts assemblies, electrical cads (preferred), ANSYS (preferred), complex geometries, familiar with max. sketching and part making features Electrical job profile: Understanding of DAC, ADC Able to read and understand schematics, data sheets regarding microelectronic components Knowledge of microcontrollers, Arduino etc. Signal processing and filtering In this signal processing and filtering is the most important skill bonus points if famil...
...a user-friendly Dashboard page allowing users to log in to their accounts, manage their profiles, and change passwords. • Seamlessly integrate ChatGPT API to enable dynamic user page functionality. • Design a dynamic administration page with the ability to add or remove subscribers, manage sign-ups, and generate automatic invoices. • Correct typographical errors in HTML pages, update email templates, and insert an MP3 file on the home page. Requirements: • Strong experience with Python, PHP, JavaScript, HTML, and Django. • Familiarity with ChatGPT API integration. • Proven experience in developing user dashboards, API integrations, and administrative pages. • Excellent debugging and optimization skills. • Keen ...
Hello, I'm looking for a freelance specialist to translate a large collection of audio files from Pashto to Urdu. The audio format is MP3 and I have all the source files available. I have more than 7 audio files which is a total of 1 hour audio that need to be translated into Urdu. This job requires a high level of proficiency in both languages, so please only apply if you are native pashto speaker and confident that you can deliver an accurate and high-quality translation. Moreover, I'm looking for a freelancer with lowest rates but time wasters will be reported. I'm looking forward to working with you!
... make it's MP3. Second is editing MP3 file in Hindi by removing wrongly spoken words. Module A 1. What is the work? A. I need a simple copy paste type of work. B. I will provide you a website from where you will copy content and paste in file format, I will provide. C. After that, create MP3 from this text. That's it. 2. Files A. I need 40 MP3 Files. 3. How to do? A. That I am ready to guide you. Even while you do, if you need help, I am ready to guide you. 4. What are steps? A. Open a web page from source website. Find if that web page meets our needs or not. B. If yes, copy it's content into a txt file. We can call this as Source-Text-File. C. From Source-Text-File, copy one field data and paste it in Target-Text...
...BEFORE BID. I need an experienced programmer who can develop a system of text to speech. I already have a website for mp3 to text download. It is in Python 3.7 so you should use that. Now you need to add another Tab there where users can upload their text as docx or text file or write the text inside a box and click convert. Then the software converts that text to speech. After that user can play the speech, email it or download the mp3. User should be able to choose, male/female voice, voice style like English (US), English (UK) and speed of voice and tone of voice like serious, normal, joyful. It would be great if it can machine translate the text also before converting to speech. It should be able to process unlimited wo...
Hello, I need a programmer and web designer who can create a responsive, fast and SEO optimized template for my website: The template must contain some functions such as: registration system, file upload (mp3), audio player, among other functions. Everything is explained in detail in the attached video. The template must have a design compatible with the theme of the site, which is audios for whatsapp. The worker must program the template with all the functions shown in the video. Some functions are: Home (00:02) Play/Stop button (00:12) Single Page (00:18) Newest/Populary tab (00:47) Login or Reistration Area (01:06) Scroll System (01:08) Login or Registration area (01:14) User Functions (02:03) Upload Audio System (02:32) Members Sound Page upload (05:40) Favorite button
I'm looking for help with a project using the ESP32-WROOM-32 model. It could also run on the esp32-s3 but preferarly on the esp32. The project should be able to run on platformio or arduino is also an option. The project should be able to run the "matter protocol" creating a thermostat definition device. The matter protocol can act as a bulb, fan, switch, etc. But for this project the goal is to be able to be recognized as a thermostat or AC unit, it should be able to receive temperature changes and on/off commands.
We create an application. Android and iPhone format To download Tik Tok videos or with the Tik Tok or audio tag The application should be similar to this application 1- It should be in at least 13 languages Among them are Cuban, Japanese and Chinese. 2- The feature of subscribing to app purchases should be to limit ads so that the user can access the app without ads. 3- He can also download the MP3 audio according to his choice, as shown in the application above. 4- To have the method of using the application. 5. These settings are in the United States. 6- To be in the settings, cancel the creation to block ads. The application should be smooth and distinctive
I'm building a GPS Guided Robot. The car has to go to way points. I'm having struggles with the code. Thank you
Hi Jishnu I need support to modify an open source project based on Your reviews are good and hourly rate is low so I am contacting you first. I use VScode, platformio either esp-idf and arduino with esp32 target on linux. Hopefully you can work with this and also remote desktop. Should you be interested lets chat. If we work well together I'm open to a higher hourly rate later.
Basically, i am using an Arduino UNO with an IMU to detect and record waves. I am not a programmer but have managed to get some useful files which work somewhat. The main difficulty i face is combining them all into 1 useable file. I am working on a project in Arduino with limited coding knowledge. I have a few sketches of code which work individually and I'd like to combine them into 1 working code. Code should be able to detect a wave and measure wave parameters such as frequency, height and period. thanks.
1. I'm looking for an expert video editor to do 40 YouTube videos editing for me at a low price. (each below 10 minutes). 2. I will provide you human voice (in MP3) for each video. Your job is simple. Take Copyright free footage (from net) and add audio (which I already provided you). On Screen, text(s) should appear (2-3 word heading in bold and big letters) about which point the voice is speaking about. Save it as MP4. Done. 3. No creativity required. It is mechanical work. That's why, I am seeking low cost work. Presently I am doing it myself so I know technicalities of this work. 4. I am fed-up doing same work everyday. Thus, I am searching someone who can do it for me. 5. High price people, I respect your skill set but this project does not need that level...
I am searching for an experienced freelancer to provide voice over services for my project. Specifically, I need a freelancer who can provide narration in an MP3 format with a good audio quality. The successful freelancer should include their experience in their application, which should also provide detail about their project plans. This project requires work in the voice over field, so experience in this field is a must. I will be checking any past work from the successful freelancer, so please make sure that the sample is relevant to the job at hand. Looking forward to receiving your application!
I have four Teknic motors, four 0-10V inputs, and two enable inputs per motor to be coated to a ClearCore controller. One analog input will control the motor position and the 2 enable bits will allow movement. there is a sample program attached for a single motor marked example, and my attempt. it is bad but it may give you a better idea on where it is going. There is a library here, there is an Arduino wrapper here
Hi I need someone who has worked on MPU6050 software for DMP. I’m stuck in dmp initialization. I need to run the sample code. It’s using I2C device and I can get register address 0x68. All wiring are correct. If you have worked on this DMP, then let’s talk. I cannot pay for trying. Need ASAP.
I need to adopt a code to NUCLEO STM32F413ZH within Arduino IDE which is now written for STM32F407. It is a CAN-BUS Rx Tx code. I will provide working code and the datasheet for stm32f413zh. I'm paying only after the job is done. No extra payments when work in progress. This job should be fast and simple for a person who knows what he is doing.
I have an existing circuit board (PCB) project which I need to bring up to date and then organize ordering for a new PCB Arduino project. This is an urgent project so I am looking for assistance in completing it as quickly as possible. I have selected the existing project choice for Question 1. Regarding Question 2, you will need to list and find any additional components that the PCB manufacturer will need to build the PCB. Lastly, regarding Question 3, I would like this to be completed by the end of this month. I'm looking for an experienced freelancer to work on this project and complete it within the agreed timetable. If you have experience in PCB design and components sourcing, then I invite you to reach out and I'll...
...and hardware integration to develop a system that can control a wheelchair based on eye blinks. The project involves developing a Python code that can capture eye blinks and the frequency of eye blinks using a camera attached to a wheelchair. The code should then transmit this information to Raspberry Pi and Arduino microcontrollers, which will be responsible for controlling the movement of the wheelchair. The ideal candidate should have a strong background in Python programming, image processing, and experience with hardware integration. Familiarity with Raspberry Pi and Arduino is also desirable. The candidate should have the ability to work independently and be able to complete the project within the given timeframe. If you are passi...
I'm looking to set up an Arduino project and need some assistance getting it going. I'm working on a Windows platform, using an Arduino Uno model, and have all the necessary components and hardware that I need. I'm hoping to find someone who can provide me with an exact guide line so I can get started on my project. Ideally, this person would have experience with Arduino, be knowledgeable in coding, and have excellent troubleshooting I have trouble setting this up need a fast and efficient guideline to set it up 1 more project to come after that
...electronic shop and have then written a program on Arduino and the stuff works. It is a LOT of wires, it took ages to assemble and is obviously not the way to bring the prototype forward. I would need someone to design a PCB board which would basically do exactly the stuff that I have drawn (please note that I would need a PWM on the stirrer as well, this is not present in the current wiring scheme). Everything written in green in the wiring scheme is in a different part of the prototype (ie in a physically different container, linked by a 5 way cable). The whole project is on a 12 V circuit apart from the two UV lights which need 38 V. Input is 12 V. Upon project assignment I will send the designs with the size constraints over. Aim is to have every...
I have a working prototype using an arduino nano, motor controler & switches to control a motor moving a lever between 2 limits. I would like to convert the protoype to a production PCB and remove any redundant components from the arduino and motor control boards. (should continue to allow for arduino software updates via usb) and am looking for someone who can produce the necessary design documentation. I am not an electronic engineer, I have built a working version but have struggled using open source software to produce the standardised documentation (schematic, pcb layout, bill of materials) which seem necessary to engage with a board manufacturer. I will provide a drawn connection diagram, photos of the prototype (if ...
...looking for a software development expert to create a hello world program using an ESP32 camera on an arduino platform. This project requires an intermediate level of programming knowledge, and familiarity with the ESP32 camera and the arduino environment. The successful candidate will be responsible for create a hello world program which will detect the camera, set it up and be able to capture and display images or videos to the screen. They will also be expected to debug the code and suggest improvements to the program. This project is perfect for a skilled software developer who has experience creating camera-based projects, debugging code and producing professional results for clients. The successful candidate will be knowledgeable ...
I am looking for a Freelancer to help me set up an STM32 Arduino development environment. The processor architecture I am using is STM32. I'm not sure if I need a custom bootloader but I'm open to exploring the possibility. I want to set up either a Makefile or PlatformIO environment for this project. The person I hire should have experience working with both STM32 processors and the Arduino IDE. I'm looking for a reliable person to get this job done quickly and with quality.
I am looking for someone to help me write Arduino code on a Mega platform. I already have the necessary components for the project and simply require someone to write code that can help me with data logging. I am familiar with Arduino programming and am looking for someone who can deliver high quality code promptly. If you are an experienced Arduino programmer and think you can help me with this project, please get in touch.
...Format - Less than 1MB - MP3 high quality Due to the limitations of the contest, please share a sample in one of the following formats: MOV, MPG, MPEG, AVI, FLV, MP4 The phrases to record are: - Welcome to (business name)! Our business hours are Tuesday to Friday from 10:30am to 9pm, and weekends from 9:30am to 9pm. We are closed on Mondays. If you want to inquiry about our catering services, please feel free to reach out at (email). Looking forward to seeing you! - Thank you for calling (business name)! We are busy attending other customers, meanwhile let us tell you what is happening at (business name), in addition to our legendary taco Tuesday, (business name) is the place to be on Wednesday and Thu...
Hi, I'm looking for an experienced Arduino programmer who can help me complete an advanced hardware configuration using Arduino hardware and software programming. This includes programming sensors. Additionally, I need assistance completing a database-driven front-end desktop application designed specifically for Windows. The ideal candidate should have extensive experience with Arduino and Windows-based development, and should understand how to put together complex hardware configurations and applications. This project requires a precise attention to detail and a high degree of accuracy in programming and troubleshooting. If you are up to the challenge and have the necessary skill set, please contact me so that we can discuss the project in g...
I'm in need of some help adding a sound (voice over) overlay to my video. MP4 - video file MP3 - Sound File Both are 3 minutes long.
We need convert orchestral MP3 to midi score (playable by musician, not automated with software). Almost all tracks are orchestrated (band, symphonic). We give you a MP3/MP4 video You will return MIDI file with 6 tracks: bass line, chords (up 3 voices), melody2, melody1/singer Please quote for every minute of music x 6 tracks. The notation must be done correctly: avoid notes out of time or incomplete chords.
...developer with experience on building a DDEX distribution system where the user can upload the tracks and albums, images to distribute on different dsp sites like Spotify, Beatport, Apple Music, etc and receive music from our industry partners. With functionalities where the user can upload any format of track file like mp3, wav, flac so that it can be encoded into different formats and can be distributed to different dsp sites depending upon required formats. The administrator can upload the royalty files in different formats like xls, csv, txt. provided by dsp sites and calculate the revenues for the artists and label user’s earned by their distributed albums. The encoded tracks need to be stored on cloud storages like amazon S3. The assets can be dow...
Make one prototype(3d printed) of animatronic eyes with motion tracker based on Arduino and powered by compact power source (powerbank)
We need a website which interface with Arduino UNO with the help of GPRS module. In webite we shoud be able to monitor the status of the field(ie. consumer id no. And its usage detals). At the consumer side he should be able to control the waterpump and solenoid valve(for motor on off switch and for valve it should be controlled by user on time basis ). In website there should be 2 login one for distributor and another for consumer. In distributor login id with unique password And different user id(meter id) and there field status. At consumer end Login option with id and password Motor on/off Button and status. Solenoid valve status ie on off valve controling time. As a input from consumer as per requirement. Data should be save in any free cloud.
Hello! I am seeking experienced coding to create an application for weighing on an Arduino device and the Orange Pi. I am looking for a programmer who is familiar with the Arduino and OrangePi coding, specifically utilizing Python as the programming language. The goal is to connect a weighing scale for industrial use, with an IoT interface. If you are comfortable coding for these boards, and working in Python, I would love to hear from you. Please let me know what your experience and approaches are and I look forward to working with you. (Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions)
hi, i have built a basic shooting game in java library processing. I need to attach Arduino uno as one input in the game. I want to shoot using pushbutton. Can you help me with the code or maybe how to build the circut?
...someone to create an ongoing selection of Solfeggio Binaural Sound tracks. These tracks will be used for relaxation, improving focus, and reducing stress. I am looking for someone who can create original Solfeggio, binaural sounds using all 9 frequencies. 1. 396 Hz: Fear, guilt, and shame relief 2. 417 Hz: Facilitate changes, remove negativity 3. 528 Hz: Positive transformations 4. 639 Hz: Relationship, connection, compassion 5. 741 Hz: Self expression, finding solutions 6. 852 Hz: Awareness 7. 174 Hz: Pain relief * 8. 963 Hz: Intuition 9. 285 Hz: Regeneration I would like the sounds very similar to this: They must be created in such a way I can loop them. Looking for a 10-15 minute audio. If this is economical, I will continue to work
I am looking for a professional and experienced voice actor to create a high-quality audio recording of a script I have ready. The recording should be for narration purposes, and will be between 1-3 minutes long. Because my script is already written, all that I need is for the actor to provide the voice for the piece. I am looking for a voice actor who can deliver a high-quality reading with great energy and engagement. The recording should be in MP3 format and ready for production. I look forward to hearing submissions. Thanks!
