Stm32 logger jobs

I need to interface a DAQ / IEPE ADS127L01 with STM32H753. The DAQ has a SPI output at 24 bits & 500Ks/secs. No processing is required within STM32. Only, Data from SPI-Peripheral to Buffer to Peripheral (OUT) is required / DMA. The out DATA needs to be in ETHERNET Protocol. Finally, this data on Ethernet Protocol should be tied to MATLAB for FFT.

...steps (PCB is ready) 1. Software development Assumptions 1. The board should have cable inputs to which an MAF sensor (a model commonly used in cars) will be connected. 2. Software for analyzing data from the MAF sensor. 3. The PCB communicates via Modbus Slave protocol, RS485 with a master device, providing information about the air flow/current airspeed. 4. The recommended microcontroller is STM32, and the programming environment can be C/C++/C#. 5. The board should have 4 mounting holes around the edges for designing a separate enclosure, which will be a separate project. 6. The PCB enclosure is not part of this project. 7. The model of the MAF sensor is not specified, but it should be cost-effective. The specific model will be chosen based on cost assessment and the availabi...

...model 2. Develop PCB 3. Software development Assumptions 1. The board should have cable inputs to which an MAF sensor (a model commonly used in cars) will be connected. 2. Software for analyzing data from the MAF sensor. 3. The PCB communicates via Modbus Slave protocol, RS485 with a master device, providing information about the air flow/current airspeed. 4. The recommended microcontroller is STM32, and the programming environment can be C/C++/C#. 5. The board should have 4 mounting holes around the edges for designing a separate enclosure, which will be a separate project. 6. The PCB enclosure is not part of this project. 7. The model of the MAF sensor is not specified, but it should be cost-effective. The specific model will be chosen based on cost assessment and the availabi...

Programming of stm32 with air flow sensor and details are discussed in chat

Write firmware for STM32 blue pill with small OLED and rotary encoder. Must have experience with STM32 programming. We do NOT want Arduino programming. All details are in the attached document. Please add word STM32 at the top of your proposal to confirm that you have read the project description. Let us know if you have any questions. Thank You !

I am seeking support on developing an Arduino code to function with a data logger and a K type temperature sensor. The project revolves around an Arduino Uno board, and experience with it would be much appreciated. Key Requirements: - Skilled knowledge of Arduino coding, particularly for the Uno variant - Experience in working with K type temperature sensors and incorporating them into a data logging Arduino system The freelancer who applies for this project should have what it takes to produce code that supports the K type temperature sensor effectively. Previous experience in similar projects will be highly valued.

I am looking for a programmer who can program our custom board having stm32 microcontroller, which will be interfaced with an LCD and a wireless module. The ideal candidate should have experience in programming in C language. Specific requirements for the wireless module: - The wireless module should have certain features implemented, which will be discussed in detail with the chosen freelancer. Preferred LCD interface: - The project requires a serial interface for the LCD. SPI Please note that the programming language for this project is C.

I am seeking an developer for the task of porting the u-blox GPS driver to the STM32H7 platform. The chosen candidate should have a good track record and the right skills for this task. Key requirements for this projec...driver to the STM32H7 platform. The chosen candidate should have a good track record and the right skills for this task. Key requirements for this project include: - Proficiency in programming with C, focusing on embedded systems. - Previous experience with GPS drivers, particularly u-blox modules. - A comprehensive understanding of STM32 systems, especially the H7 series. Your main responsibility will be effectively porting the u-blox GPS driver to the STM32 software environment, ensuring its smooth functioning whilst maintaining the integrity of the e...

...Silicon Controlled Rectifier (SCR) and a microcontroller for the primary purpose of regulating voltage and current for various electronic devices. For the microcontroller, I prefer to use the STM32. Key specs include: 1. Adjustable voltage and current levels: The controller must be tunable to accommodate different device requirements. 2. Integrated Display: A feature to constantly show current voltage and current readings. 3. Safety Measures: It should have in-built overvoltage and short circuit protection to safeguard electronics from potential damage. Ideal candidates should have experience with STM32 microcontrollers, SCR, voltage and current regulation systems, and basic UI design for the display. Additionally, understanding of electronic safety mechanisms like overv...

I'm seeking an experienced freelancer to carry out programming a STM32 microcontroller using C++, with the specific aim of controlling an air conditioner system. Key responsibilities would be: 1. Programming STM32 MCU utilizing C++ 2. Applying their knowledge to design an effective control program The ideal candidate should: - Have extensive knowledge in C++ and STM32 MCU programming - Have previous experience programming for air conditioning or similar systems - Be able to implement control algorithms efficiently. I'm after a professional who can provide clear, performant, and maintainable code . This project might lead to an ongoing collaboration as we continue to refine and expand our air conditioning control system.

I have a pre-existing STM32 board (STM32H750VBTx) that requires a skilled freelancer to complete a time-sensitive project. The tasks include reading data from 6 ADC channels (DMA), transmitting it over UART, and implementing a basic Proportional-Integral algorithm to control the DC output. I will be present to explain the hardware setup and provide assistance throughout the project. Proficiency in STM32 programming, ADC, UART communication, and basic control algorithms is required. This is a straightforward task for an experienced STM32 developer, and immediate availability is essential. If interested, please bid on the project, and let's get started.

Using KAMELEON-STM32L4 model STM32L496ZGT6.I am looking for a programmer who is experienced with C language to develop code for an STM32 microcontroller. The specific function of the code is to count up to 9999 and then count down to 0 when the OK button has been pressed. sing the STM32 Hardware Abstraction Layer (HAL) library is forbidden. Reading/writing of the microcontroller's GPIO registers should be implemented with pointers. The application uses all four digits of the 7-segment display to implement a counter from 0 to 9999. • The application should use the multiplexing technique (quick switching on and off of the appropriate digits of the display combined with a change of value). • The counting direction should be controlled with the OK button of the jo...

I'm working on an embedded system design project, focusing primarily on protocol development. using STM 32 Candidates based in India only apply , this will be like a part time job with fixed hours everyday

Project Information; In the project, digital filtering is required for precise weighing of a weighing system electronics. The thing to be considered here is that the filtering should have a maximum delay of 500ms and should be adaptively effective filtering against mechanical and electrical noises. Here's the pr...filtering that will work in every system and I want to design a filter that provides a change between 1999-2001 when mechanical vibration comes. The filter must be adaptive. Because the vibration does not have a specific character. The frequency and character of vibration is variable. Project Requirements. ->Know Embedded Systems; ->Developed applications related to digital signal processing. ->Used STM32 ->Digital Filter has developed and worked on this...

We want to implement a real-time map matching algorithm for a GPS-tracker. The GPS-tracker will use an STM32 microcontroller. For this project we need a proof-of-concept: the map-matching does not need to run on the microcontroller yet (but this should be kept in mind while developing the project, as the available resources will be limited). Preferably, the algorithm should use OpenStreetMap data.

I am looking for an Embedded C Software Developer to assist me in starting a new enterprise. The project has a flexible timeline of 1-2 months and requires the development of software with basic (simple) functions. Please enter audio123 code in your proposal to be considered. ...The project has a flexible timeline of 1-2 months and requires the development of software with basic (simple) functions. Please enter audio123 code in your proposal to be considered. Skills and Experience: - Proficiency in Embedded C programming - Understanding of STM32F4 processor, XMOS processor is nice to have. - Understanding of SPI, I2C serial buses - Understanding of DMA - Eclipse and STM32 CUBE environments - Access to STM32F429I-DISC1 evaluation board - Access to oscilloscope and/or SPI signa...

I'm in need of a professional with solid experience in embedded firmware programming. The focus is on the STM32F103c8 series, hence prior work on this model is crucial. Expected functionalities for the chip are unspecified as the embedded firmware should ideally incorporate real-time operating system, communication protocols (UART, SPI, I2C), and sensor integration and data acquisition. However, I am open to possibilities and would appreciate any strategic proposals to make the project an absolute success. If you really want to stand out, your application must clearly articulate your experience in embedded firmware development and how this applies to the STM32F4 series specifically.

Need a skilled developer to create an application on STM32 platform. The goal is to develop a MODBUS driver capable of reading and writing analog voltage signals. Ideal skills and experience for this project include: - Proficiency of the STM32 platform framework - Proficiency of the FreeRTOS - Proficiency with MODBUS protocol

I am looking to have a customized Excel VBA program developed. The primary function of this program would be to generate reports using data collected by a data logger in CSV format. • The type of data to be processed includes but is not limited to sales data, customer information, and product inventory. • The data will be collected by the data logger at varying intervals; daily, weekly, or monthly. As such, the VBA program will need to accommodate this variability. The ideal freelancer for this task should have excellent skills in VBA programming, experience with data processing, and understanding of report generation. A background in working with sales data, customer information, and product inventory would be advantageous.

Project Information; In the project, digital filtering is required for precise weighing of a weighing system electronics. The thing to be considered here is that the filtering should have a maximum delay of 500ms and should be adaptively effective filtering against mechanical and electrical noises. Here's the pr...filtering that will work in every system and I want to design a filter that provides a change between 1999-2001 when mechanical vibration comes. The filter must be adaptive. Because the vibration does not have a specific character. The frequency and character of vibration is variable. Project Requirements. ->Know Embedded Systems; ->Developed applications related to digital signal processing. ->Used STM32 ->Digital Filter has developed and worked on this...

Embedded Hardware Project with Microcontrollers Skills and Experience: - Experience in developing projects using microcontrollers - Knowledge of circui...Experience: - Experience in developing projects using microcontrollers - Knowledge of circuit design and PCB layout Project Requirements: - Develop a microcontroller-based system that includes an LCD display, MP3 player, and RTC module - The project needs to be completed within 1 month I am an embedded software engineering, I am trying to do a small product, I was able to do it on a development board STM32... Now I want to create my on pcb board, I am not an expert on hardware so I will need some help to make the design. Some of the part will be on the pcb: 1- FMC 2- STM32H7 or STM32F7 3-7inch LCD TFT 4-external FLASH 5-SPI/I2C...

Hey, I'm looking for a collaborator experienced in stm32 and LVDS display usage for a project. For more details contact me.

We want a GPS tracker for that we have 2 design options. Option A Design a Esp32, stm32 or other GPS tracker. The size is key and is maximum 2 squares cm. If it less than that much better. For the moment we want the board itself, we will do an app to communicate with it later on. Option B Configure an existing solution which meets the size requirements.

I am looking for a freelancer to complete the firmware for STM32 for - UART BMS Data to DRONECAN BatteryInfo and BatteryInfoAux messages module. The requirements for this project are as follows: Ideal skills and experience for the job: - Strong knowledge of STM32(since libcanard drivers are already available) - Familiarity with DRONECAN BatteryInfo and BatteryInfoAux messages (good to have) - Ability to work with specific components as per client requirements. - Embedded programming Currently what's done: Code to read the data from BMS is ready. Code to create the DRONECAN Messages has been added but is not working as expected. This needs to be debugged and fixed. Might need some knowledge about dronecan (can be acquired easily). Heartbeat signal is currently not being...

Integration of STM32 Microcontroller with IMU BNO055 or BMI323 Overview: I am looking for a skilled developer to integrate an STM32 microcontroller with an IMU BNO055 or BMI323 for the purpose of motion tracking. Requirements: - Expertise in motion tracking and sensor data logging - Proficiency in assembly language programming - Experience with STM32 microcontrollers and IMU BNO055 or BMI323 - Strong understanding of robotics control systems Project Scope: 1. Integration of STM32 microcontroller with IMU BNO055 or BMI323 2. Developing firmware for motion tracking and sensor data logging 3. Implementing robotics control functionality 4. Testing and debugging to ensure accurate motion tracking 5. Documentation of the integration process and code Ideal Skills a...

We are a new startup based in NCR Delhi, and require one/two adept coder/s proficient in Micro Python, capable of programming an microcontroller meant to control other devices. Experience with ESP32/ STM32 and device control applications is crucial for this project. This role requires: - Strong skills in Micro Python - Extensive knowledge of the ESP32/ STM32 microcontroller - Prior experience in device control applications - Ability to optimize code for seamless device interaction - Collaborative mindset to work with another coder This project provides a unique opportunity for skilled coders to further utilize and expand upon their Micro Python and device control expertise.

I am looking for a freelancer to help me integrate STM32 and a microphone into a compact device that can record cries and provide a voice output corresponding to the type of cry. The device should have a battery life of more than 3 hours and the microphone should be able to capture sound within a range of 1-3 meters. Additionally, the device should be presented in a cradle. Ideal skills and experience for this project include: - Experience with STM32 microcontrollers - Proficiency in audio processing and voice synthesis - Knowledge of battery management and power optimization - Familiarity with compact device design and fabrication - The device will present in cradle

I am looking for a freelancer to develop firmware for my stm32 project. The ideal candidate should have experience in C programming and be able to start from scratch. The firmware should have the following features: - Board to be used: NUCLEO-G431RB Sensors: X-NUCLEO-IKS01A3 - Data collection and processing: The firmware should be able to collect data from the gyroscope and accelerometer, using I2C if you are capable of doing this I have a lot more projects right after this. If you are skilled in C programming and have experience in stm32 firmware development, please submit your proposal.

Project Information; In the project, digital filtering is required for precise weighing of a weighing system electronics. The thing to be considered here is that the filtering should have a maximum delay of 500ms and should be adaptively effective filtering against mechanical and electrical noises. Here's the p...filtering that will work in every system and I want to design a filter that provides a change between 1999-2001 when mechanical vibration comes. The filter must be adaptive. Because the vibration does not have a specific character. The frequency and character of vibration is variable. Project Requirements. ->Know Embedded Systems; ->Developed applications related to digital signal processing. ->Used STM32 ->Digital Filter has developed and worked on this...

Project Title: Small project for using sensors on board STM32 B-L4S5I-IOT and send it to cloud Overview: I am looking for a freelancer to develop system using the STM32 B-L4S5I-IOT board. The main feature I require for the system is use most of the sensors on the board and transmit data to cloud. I already have all the necessary hardware for the project. Skills and Experience: To successfully complete this project, the ideal freelancer should have the following skills and experience: - Proficiency in programming STM32 microcontrollers - Experience in developing home automation systems - Knowledge of temperature control algorithms and sensors - Familiarity with the STM32 B-L4S5I-IOT board Communication: I prefer to communicate with the freelancer via email th...

I am looking for a freelancer who can provide me with sample code using UART in 9 bit multiprocessor mode in STM32 CubeIDE on a STM32F103RB6. This project is for personal use and I need it completed within 1 day. Specifically, I need the sample code to include the following features and functionalities: - Data transmission and reception using UART in Interrupt mode - Receive / Transmit buffer 256 bytes I'm looking for someone that has already worked with Multiprocessor Mode and 9 data bits in UART. You should be able to bang this out pretty fast. A simple master, a simple slave that listens for its address (Multiprocessor Mode). This is also known as a few others, Multi-drop serial, Multi Processor Communication Mode (MPCM) used in vending machines, a wide range or us...

STM32 Programming I am looking for a skilled programmer who is experienced in working with the STM32F030 microcontroller. The ideal candidate should have a strong understanding of C programming language and have previous experience in implementing signal processing functions. Requirements: - Proficiency in programming with the STM32F030 microcontroller - Strong knowledge of C programming language - Previous experience in implementing signal processing functions Skills and Experience: - Expertise in STM32F030 microcontroller programming - Proficient in C programming language - Previous experience in implementing signal processing functions If you meet these requirements and have the necessary skills and experience, please submit your proposal and include any relevant samples of...

... Robust Database Design: Develop a comprehensive database in SQLAlchemy for managing user data and message logs, ensuring phone numbers are stored in E.164 format. Interactive and Media Message Capabilities: Enable sending of various message types, including interactive and media messages. Error Handling and Logging: Implement advanced error handling with detailed logging using the logger library, ensuring all actions are logged at different levels for effective debugging. Webhook Integration: Develop a reliable webhook for real-time data processing in coordination with the WhatsApp API. Unix Timestamp Usage: Employ Unix timestamps for all relevant data (messages for example), ensuring time-consistent data management. Unit Testing for Database: Incorporate...

We want expertise in electronic engineering and design to help us in our project regarding control of three phase motor speed using STM32 microcontroller. We want to utilize IOT along with BLE technology. We want to design and implement a system from scratch with hardware being the first step and software being the second.

...and implementing filtering algorithms (e.g., Kalman filter) to ensure precise weight measurements. Design and integrate user interface components for seamless interaction and display of weight readings. Conduct rigorous testing and calibration to guarantee accuracy and stability under varying conditions. Requirements: Proficiency in embedded C/C++ programming for microcontrollers, specifically STM32 series. Strong knowledge of signal processing techniques, particularly in implementing filters for noise reduction in weight measurements. Experience in hardware-software integration and sensor interfacing. Familiarity with testing methodologies and calibration processes for precise measurement systems. Additional Details: Deliverables: Clear documentation, including system design, u...

I am looking for a freelancer to create a custom PCB with STM32 and TJA CAN Transceiver to convert UART BMS Data to DRONECAN BatteryInfo and BatteryInfoAux messages. The requirements for this project are as follows: - New design from scratch: The client does not have a schematic or design for the PCB and needs a new design from scratch. - Small form factor: The preferred form factor or size for the PCB is small, less than 5x5 cm. - Specific component requirements: The client has specific components in mind for the project. Ideal skills and experience for the job: - Experience in PCB design from scratch. - Strong knowledge of STM32(since libcanard drivers are already available) and TJA CAN Transceiver (or mcp2515 if that's easier) - Familiarity with UART BMS Data and DRO...

I'm developing a weighing system. I have this problem. When I ap...have this problem. When I apply mechanical vibration to the weighing system, the kg change on the weighing system changes by 5-10 grams. In other words, if there are 2000 grams, the values go back and forth between 2000-2010. When I increase the filter parameters I apply, the problem is solved, but this time the system response slows down a lot. I am looking for someone to develop this process for STM32 without aggravating the system response. What I want is for you to create me a filter function that performs a precise filtering operation in the form of a .c .h and a usage file. Payment will be made after I try this file and see that it is successful. I am looking for talented freelancers to work with on an ...

I'm developing a weighing system. I have this problem. When I apply mechanical vibration to the weighing system, the kg change on the weighing system changes by 5-10 grams. In other words, if there are 2000 grams, the values go back and forth between 2000-2010. When I increase the filter parameters I apply, the problem is solved, but this time the ...have this problem. When I apply mechanical vibration to the weighing system, the kg change on the weighing system changes by 5-10 grams. In other words, if there are 2000 grams, the values go back and forth between 2000-2010. When I increase the filter parameters I apply, the problem is solved, but this time the system response slows down a lot. I am looking for someone to develop this process for STM32 without aggravating the syst...

Project Title: Customer service call logger Description: - I am looking for a freelancer to help me create a customer service call logging system specifically for support calls. - The ideal candidate should have experience in developing call logging systems and be familiar with technical support processes. - The project requires the freelancer to use a provided template for the call logs, so knowledge of working with templates is necessary. - On a daily basis, we expect the freelancer to log between 50-100 calls, sometimes more. - The system should be user-friendly and efficient, allowing us to easily track and manage the logged calls. - Additionally, the freelancer should provide suggestions for improving the call logging process if they have any. - The project timeline is flexib...

I am looking for a freelancer to create a custom PCB with STM32 and TJA CAN Transceiver to convert UART BMS Data to DRONECAN BatteryInfo and BatteryInfoAux messages. The requirements for this project are as follows: - New design from scratch: The client does not have a schematic or design for the PCB and needs a new design from scratch. - Small form factor: The preferred form factor or size for the PCB is small, less than 5x5 cm. - Specific component requirements: The client has specific components in mind for the project. Ideal skills and experience for the job: - Experience in PCB design from scratch. - Strong knowledge of STM32(since libcanard drivers are already available) and TJA CAN Transceiver (or mcp2515 if that's easier) - Familiarity with UART BMS Data and DRO...

I have made a circuit using attached GPIO pin circuit diagram, i want someone to write the code , i have code for a another model of stm32.

... Embedded Programming and Hardware Designing PCB Designing Schematic/Circuit Designing PCB Assembling 3D Design and Printing Automation AI-assisted development App Development, both Android and iOS Web Application Development Your verifiable expertise should extend to tools like Altium, Eagle, KiCad, Orcad, Proteus EasyEDA, Solidworks, Fusion 360, Arduino IDE, STM32 IDE, MPLAB, MATLAB, Microchip Studio, Eclipse, Intellij, Netbeans, Atom, FlatCAM, Android Studio, XCode, VSCode, WinAVR. Avoid using copy/paste bids; only bid if you're proficient and capable of handling the jobs we offer. In your first reply, provide a comprehensive portfolio with references outside Freelancer for verification. NOTE! Failure to check our profile will disqua...

I am in need of a hardware+PCB designer who is familiar with Altium for a project involving circuit design. The complexity level of the design is moderate. I have specific components and materials that should be used in the design. Skills and experience required: - Proficiency in Altium - Strong knowledge of circuit design - Experience with modera...design. The complexity level of the design is moderate. I have specific components and materials that should be used in the design. Skills and experience required: - Proficiency in Altium - Strong knowledge of circuit design - Experience with moderate complexity level projects - Ability to work with specific components and materials provided by the client - People who has experience with STM32 is preferred(STM32+small LCD disp...

Get logging working in the repo below: https:...the repo below: This link (part of the repo) shows all the files that need to be written out: ***You don't need to do any ML/DRL training, just get the vehicles to take random actions and get all the logs written out (especially ). Feel free to adjust module verions in and a bit of debugging just to ensure the logger works. ***Again, get the logger to work, especially for vehicle activities in This should be quick, so *maximum* of 2 days. ***Once this works at your end, I'll give you access via Anydesk to get it working at my end.

Experiencing CRM trouble, specifically the Multi Data feature in our mobile app. It's fine on the web but not on mobile. Seeking a Kotlin-savvy developer to fix it and understand PHP frameworks, Kotlin, MySQL, and APIs. Potential long-term project. Issues: Multi Data Logger in Parcel on Board: Web-only functionality, needs multiple data loggers on one screen for mobile Parcel on Board milestone updates. Check for Return Bookings' in Delivered Milestone: Web-based feature needed as a single screen on mobile app. Needed after 'out for delivery. Seeking a fixed price quote; upon selection, the chosen bidder will receive comprehensive project details. Our backend team will be readily available to offer all necessary support throughout the project.

I am looking for an Electronic Design Engineer with a specific skill set in Hardware Design and Simulation. The ideal candidate should have experience in designing analog circuits and systems. Skills required: - Microprocess :STM32, ESP32, Arduino - Knowledge of circuit design principles and techniques - Familiarity with circuit simulation and analysis tools Experience: - The engineer should have at least 5-10 years of experience in circuit design - Strong understanding of PCB layout and component selection for circuit designs Software/Tools: - Familiarity with industry-standard circuit design tools and software - Proficiency in using simulation and analysis tools for several circuits Note: The specific software knowledge requirement was not mentioned by the client.

Hello! I am looking for an experienced freelancer to help me with learning STM32 programming. I am currently at an intermediate level with programming, and am interested in learning all aspects of STM32 programming – from basic concepts to specific applications to advanced techniques. I am ready to start the learning process immediately; please contact me if you are qualified to teach me the skills I need. Thanks for your time.

encoder, 2x16 lcd , stm32 , current sense , voltage sense , 100W (5A) motor control board.

I am looking for a freelancer to help with a project that involves electronic and programming development. Specifically, I am looking for someone to help with full system d...am open to suggestions regarding the specific platform and technology that may work best for this specific project, we think of Nano Pi to communicate with Thermal camera (rs232), we need to make communication and show the pixels on the LCD screen + be able to access that pixels from Nano PI externally via ModBus RS485 (PLC), PCB can be alternatively developed from beggining using for instance STM32 microcontroller. The turnaround time for this project is 1-3 months. Therefore, I am in need of a freelancer who can work efficiently and within the given parameters to ensure that the project is completed in a time...

stm32 , 48V PMM motor , 3 phases, current limitation and LCD. I need only PCB design.