# Matlab mathematica jobs

Hello,
I am working on a controller design to determine the duration of traffic lights using Matlab's ANFIS toolbox, and I am looking for a experienced freelancer to model the system by using Simulink (Note: you will not design the Controller, I ...between the SUMO Simulation Software by using Traci4Matlab).
In addition to that, the most critical part of this project is that the ANFIS controller will receive the input parameters by communicating with the Sumo simulation program. In order to establish a connection between sumo and **matlab** program as I mentioned you need to be experienced in using Traci4matlab to make connection between SUMO and Simulink.
Finally, If you have worked with traci4matlab before, please tell me about your project
#Simulink #**Matlab** #Sumo #Tr...

Only experienced freelancers in the relevant domains.

I need someone who have experience in **matlab** to do a small project about speech processing

I need you to create a humanoid robotic model and solve the inverse kinematics for a specific movement. I need you to create a robotic model with 70 degrees of freedom.

Apply kernal PCA, fisher linear, Laplacian to sort image (machine learning) Other feature extraction techniques are welcome Need to arrange free call first Python is acceptable but need to be discussed first

Mathematical modeling of a grid connected microgrid consisting of PV, wind, diesel using mixed integer linear programming algorithm on **matlab** or GAMS

I need a PhD proposal that makes Three contributions..
Should be network security and in this case-MANETS… it could be to improve its security,reliability,etc.
I also need someone who is good in simulations and more so **MATLAB**. We will walk a journey together to the very end

I've write paper, but there are few technical mistakes inside, due to which SCI Journal is not accepting the paper, I've everything.
Area: Electrical Power Engineering
**Matlab** Programming
Targetted Journal: SCI Journal

Simulation of the Saab 340 The aim of this project is two-fold. The first is to develop an integrated desktop simulation of the new Saab 340B based on the current set-up for the Jetstream J31. This will involve integrating models with a yoke and FlightGear visuals. The second is to transfer the model into the centre’s Engineering Flight Simulator. Milestone for the project: 1. Build Simulink model of the saab 340B aircraft. 2. Link the Simulink model with the flight gear software. 3. The Simulink model should run on separate machine and flightGear on separate machine.

I have a **matlab** and software engineering job that i need be done quick..detais will flow

I have Engineering IT/CS questions on daily basis and need a freelancer who can h...questions on daily basis and need a freelancer who can help me to solve them daily. I can Provide 50 INR per question and if you are approved after 10 successful submissions, you can take as many questions as you want, and based on your performance we'll pay you (Bonuses Available). The difficulty of the questions is mostly Easy to Medium only, like questions on:
DBMS, Programming, Discrete Maths, **MATLAB**, Web Development, ER DIagrams, etc.
NOTE: No plagiarised answers are needed from Google, attempt questions only if you'll be able to solve them by yourself in easy steps that would be more than enough. No auto bids are allowed. Type "SOLVE" at the start of your bid.
We can work f...

I need to minimize equations One will be single objective optimization Other will be multi-objective optimization

I want to make report and final year presentation for my final year report.
It’s about 60-75 pages overall pages and should make some simulation, modeling in **matlab** and Simulink and power point presentation

I need you to create a humanoid robotic model and solve the inverse kinematics for a specific movement. I need you to create a robotic model with 70 degrees of freedom.

I need you to create a humanoid robotic model and solve the inverse kinematics for a specific movement. I need you to create a robotic model with 70 degrees of freedom.

programming cryptosystem for image encryption that using in IoT .the program must based on parallel processing. the program must written in python. every function or part of program must have comments for understanding the work. the attached file program in **MATLAB** i need to transfer to python with GUI . The program must work with GUI Graphical User Interface

I want to implement Bat algorithm optimization for mobile robot path planning using **MATLAB**

I need a python developer, **MATLAB** expert from Pakistan
I need a person who may write coding for Speech detection
I need simple and easy coding and at very low budget

The prototype to be developed by using **MATLAB**.

Hi everybody. I need help for my project. If you REALLY CAN do these things then propose.
1. Meeting online for **MATLAB** project explanation.
2. Doing some changes for example adding graphs. If you have any questions I could discuss in more detail.

I need the creation of a structural topology optimization code using the FEniCS package, with the obligation to perform the sensitivity calculation using Dolfin Adjoint (http://www.dolfin-adjoint.o...Frequency X Iteration graph and finally the FRF (frequency response function) graphs. All for at least the first three modes in modal analysis and in forced vibration considering established frequency ranges.
References:
BENDSOE, M.P.; SIGMUND, O. Topology Optimization: Theory, Methods and Applications. [s.l.] Springer Berlin Heidelberg, 2003.
ANDREASSEN, E. et al. Efficient topology optimization in **MATLAB** using 88 lines of code. Structural and Multidisciplinary Optimization, v. 43, no. 1, 2011.
***** IMPORTANT NOTE: IF YOU HAVE NEVER WORKED WITH FENICS, PLEASE DO NOT SUBMIT A PROPOSA...

I need to build a **Matlab**/Simulink model for a hybrid floating photovoltaic - hydro power generating project. and analyse the system with various scenarios by changing the parameters and optimize the system to get more stable output by changing the hydro generation over the natural changes of solar generation due to cloud and time matters.

I am looking for a programmer who is expert in CFD and **MATLAB** programming.
Problem Setup: We have a rectangular fluid domain confined by two vertically placed rigid walls. An isolated particle(may be rigid or flexible) is located along the channel centerline. The assumptions are fluid is viscous, incompressible and newtonian in nature. we want to study the settling velocity and deformation experienced (in case of flexible particles) while sedimenting under the action of gravity. the fluid domain will be assumed to be doubly periodic. we want the **MATLAB** code for the same problem setup using Lattice Boltzmann approach.
The data provide for our side will be:
!) shape of the particle
2) Unstructured mesh of the particle with all the nodes and edge details (made with help of dis...

Hello,
I am working on a controller design to determine the duration of traffic lights using Matlab's ANFIS toolbox, and I am looking for a experienced freelancer to model the system by using Simulink (I will give the ANFIS Controller when it is completed). In addition to that, the most critical part of this project is t...looking for a experienced freelancer to model the system by using Simulink (I will give the ANFIS Controller when it is completed). In addition to that, the most critical part of this project is that the ANFIS controller will receive the input parameters by communicating with the Sumo simulation program. In order to establish a connection between sumo and **matlab** program, you need to be experienced in using Traci4matlab.
#Simulink #**Matlab** #Sumo #Tra...

Hello,
I am looking for a freelancer with experience in using **Matlab**, Traci4Matlab and SUMO traffic simulator.
If you have worked with sumo and traci4matlab before, please provide information about the project you have worked on

I need somebody that has some knowledge in telecomunication to help me simulate a propagation of signal through some matrixes that resemble interference/phase masks. The code might seem hard to get at the beginning while in reality its just a gaussian beam propagating through some matrixes and giving back some numbers to get stored, so don't get scared by the initial steep learning curve since i can explain every bit of the code with you in chat. Thank you :)

Aim: To study the settling dynamics of a circular particle confined in a boundary medium using Penalty Immersed Boundary method.
I already had a source code for the same problem setup in **matlab** using Immersed boundary method

...positions)
· Candidate must have at least Bachelors or Masters EE
- FPGA design experience (RTL Coding, comms, DFE(DPD, DUC, DDC, FFT, FIR, CFR)
· Candidate must have verifiable experience for a minimum 6 years as a Verilog/System Verilog/ VHDL/RTL programmer with extensive Verification test bench development experience
· Preferred prior project experience in 5G ORAN - RU/DU.
DSP knowledge
**Matlab** modeling is preferred.
· eCPRI experience preferred . Special consideration will be given to those who have experience as 100G Ethernet or 10G Ethernet , IEEE 1588
· Knowledge of Queuing theory
· Tools – Minimum 4 years of FPGA design experience – Xilinx Vivado, Intel and/or Lattice experience including Synthesis, Place and Ro...

We have created a sound-based application for measuring and modulating vagal tone. The software was programmed using **MATLAB**. Now, we want to convert to Android and iOS versions and we need an expert with relevant experience.

use a open source tool to generate mesh and define boundariesï¼ŒMainly modify the **matlab** source program

Hi Nishan J., I noticed your profile and would like to offer you my project. We can discuss any details over project is using **matlab** to generate mesh

PLEASE ONLY RESPOND IF YOU ARE PROFICIENT IN **MATLAB** and can fix issues with Parallel Computing within **Matlab**.
Basic **Matlab** or generic parallel computing skills will not suffice - I do not want to waste my time or your time.
We can discuss requirements with the appropriately qualified person but essentially I want to use multiple GPUs for data analysis on a single motherboard
Please address the following questions
(1) What is your availability for working on the project starting Aug. 01 through Aug. 05? Please provide exact hour available in CET or EST?
(2) What is your GPU and Parallel Computing experience?

**MATLAB**
formulate problems in tensor form and fluently manipulate tensors;
efficiently run vectorized code;
apply matrix decomposition to practical problems;
represent problems as objective functions and apply optimisation to solve them;
formulate and understand problems with stochastic elements;
understand the principles of Bayesian inference and apply it to simple problems;
create effective, clear, and precise visualisations of scientific data;
understand the effects of sampling and noise on time series;
process, filter, summarise and plot time series and array data.
recognise risks in the safety and correctness of numerical operations.

I am requesting a rooftop solar array designed with **Matlab** Simulink software. The system will be tied into the local power grid. The power produced from the solar array will feed the circuits to the facility and any excess will feed the local power grid. This system will require two meters, one to measure the power fed to the local power grid and one meter to measure the power used from the local power grid when there is no sunlight available. Please the attachment for more detail.

Need a simple **MATLAB** simulation model
AC source connected to AC/DC rectifier (current source) commected to load (equivalent model for PEM electrolyser).
Need to analyse impact on hydrogen production (in percentage) by of ramping up amd down load.
Graphs to check
Harmonics at DC side at different loading.

This is a **matlab** coding task. I was trying to run a regression, most of the codes are done. There are a few variables, momentum, book-to-market, and market cap.. Originally, it runs well with the above variable. I tried to replace one of the variable with another variable (pe ratio) (empirical analysis sheet, row 70), which are also numerical values. However, the regression won't work.
Apart from fixing the bug, I have 2 more simple tasks. The first one is to sort the average pe ratio and return according to sector code, the second one is to find the average return and average pe ratio of each year.

I need a python developer, **MATLAB** expert from Pakistan
I need a person who may write coding for Speech detection
I need simple and easy coding

I have a code written in **Matlab** (GUIDE). It is a GUI based code.
I need it converted into HTML code. It should run here ''
The code is a calculator GUI.
The Idea is basically to upload this code in my blog.
Thanks.

I am looking for an expert to do minimal work in **Matlab**.

I have share to attached the guidelines. Please let me know if you can do is Sentiment Analysis work.

I want a code that fill this purpose:
Using Python (better in Jupyter notebook section) or **Matlab**.
Collect in three csv:
- TWEETS
- REDDIT POSTS
- NEWS TITLES
ALL IN ENGLISH LANGUAGE, AND ALL OF THE LAST 7 DAYS.
EACH ROW MUST CONTAIN THE SENTIMENT ANALYSIS VALUE
(FOR EXAMPLE FROM - 1 TO 1, LIKE IN TEXTBLOB)
FINALLY, BUILD A TIMELINE THAT REPORTS THE AVERAGE OF SENTIMENT VALVES IN EVERY HOUR

I need a python developer, **MATLAB** expert from Pakistan
I need a person who may write coding for Speech detection
I need simple and easy coding

Explain the **matlab** code for the project.
Answer advisor's questions.
Add speed and acceleration graphs.

This project focuses on making efficient utilization of 2 different Renewable Energy Resources – Solar, Wind (A Hybrid system) & by integrating them into a Smart Grid on a small-scale level. The Energy generated can be preserved in a Battery and can be utilized to aid the Network whenever required.
Need someone who can aid me with Modeling using **MATLAB** Simulink and calculation of power --> Generation to Distribution to an area (Project to be done using Linear programming optimization)

I need to design a Hilbert transform and test it in **Matlab** before implementing it on FPGA. I have never created a Hilbert transform with **Matlab** without the hilbert() function, and the function does not return coefficients. I can't find the documentation on how to do it. I need someone to help with it.
The **Matlab** code must also use the filter on sample data and return complex values after the transform.
You should provide the **Matlab** code used to create the filter and get the coefficients.
I will pay $70 USD for the task.

I have 2 **Matlab** source code file that I need to be translated to python.
I don't know anything about **Matlab**, but I think the content of the code is pretty basic, and the translation shouldn't take long for someone who knows what they're doing.
Each files is around 180 lines long, but they are very similar.
The initial **Matlab** code exports heatmaps as PNGs. In python, I would like to export this data in CSV or JSON files instead.

Need Monte Carlo Simulation help and specially in coding, **MATLAB** coding is preferred. (Failure Analysis includes high gust wind speed effect and up to 10000 to 50000 simulations)

Recently I have gone through one of the new research works based on modelling earthquake dataset for investigating quiescence before the relatively large earthquakes. In this paper, I have found some methods to be
difficult for writing the code and hence I need an expert in **MATLAB** coding with sound knowledge of statistical data analysis.