Ethernet implementation on zcu216 xilinx ultrascale+ board.

Dear, I am an Electronics engineer holding a master degree in the field of Digital Electronics. My master thesis work involved a part similar to this project where PS and PL communication was used. The thesis was the implementation of the physical layer of Narrow Band IOT specification by the 3gpp. First i used Zync-7000 PS to profile all system block that were written in C. Then the block with the longest run time was accelerated on PL. c code was converted to RTL using High Level Synthesis. Finally, PS and PL were connected in Vivado IP flow. I have the experience needed for this job. If you have any further inquiries, do not hesitate to contact me.

Hello I am FPGA expert I have done many projects before So I can do your project too For more info let me discuss

Are you looking for a skilled FPGA engineer with experience in both Verilog and VHDL? Look no further! I am an experienced FPGA engineer with a proven record of designing successful digital circuits using Verilog and VHDL. I can help you with: Designing and prototyping of digital circuits in Verilog and VHDL. Writing, synthesizing, simulating, and testing the circuits on FPGA devices Converting existing projects from Verilog to VHDL and vice versa. Debugging and troubleshooting for projects that have already been written in Verilog or VHDL. Providing documentation to support your project goals. I have worked on a variety of FPGA projects, including networking, audio, and video applications. I have a passion for creating high-quality, optimized, and reliable digital designs. My goal is to provide you with the best possible service and deliver outstanding results. Contact me now to discuss your project requirements and how I can help you bring your idea to life.

I have used the ZC7020 chip for Ethernet communication, mainly using the ARM core for network communication (LWIP). If possible, please contact me.

I am a fpga Rtl engineer with 3.6 years if experience.I have worked on ethernet transmitter and receiver implementation on zynq 7000.I have worked on the tools like xillinx vivado, quartus, lattice diamond., modelsim. My highest educational qualification is MTech vlsi.

Hi Client, I have Experince in Vlsi design and veriffication , i and my team working on diffrent projects using diffrent type of tools like xilinx,Vivado, Cadence, Modelsim ect.... I and my team working on FPGA'S like Spartan, Artix7, Basys3, Zynq, ect...and we are supporting student level projects also. So I am sure I will help in your project,if you want more details you can freely text to me. Thank you