Ansys complex analysis for my 3d Model -- 2

I have a 3d Model (3d dwg) that i want you to refine it and make the analysis. I have also added the model .wbpj but it's not complete, it's missing the steel tube with concrete. You need to add these missing parts and assign all contact surfaces etc. I need the upper beam loaded with horizontal displacement increasing from ±1mm to ±100mm (cyclic loading) (i will give you the exact loading graphic) and the bottom beam restrained and i want to see how all the parts react to this displacement load. You can see the attached picture for more informations. Also the contact surface betwen the concrete inside the steel tube and the inner core of the bar will have 3 different friction coefficients that I will provide. The completion time for this project is 4 weeks because it's a very complex model and it needs time to be done correctly. This model was done after a real experiment so i need the data to be correlated to the real experiment. I will also need a written report with the exact steps you did in ansys to complete the project and with the diagrams resulted (von misses) for some axiala deformations of the steel core. We will talk in private for more informations. I will also need a report (word document) describing the steps used to create the model and to refine it and also with the results. I have worked in Ansys before and I know it takes time to define all the contact surfaces and other stuff. Timeline for this project is 31st JAnuary (4weeks) and maximum 200euros for this project.