Structural Engineering Jobs

I'm looking for the design of a repair detail for a timber truss roof. The internal cord has been cut out and now needs to be re-instated. The axial loads for the member are -4.5kn The member cut is shown on the pdf attached. I suggest a bolted connection using M10 8.8 bolts through C16 timbers to each side of the left over section of the cord. Alternatively a splice connection detail could be specified. The installer would prefer not to have a gusset connection at the gang nail places due to the health and safety implication of removing the left over cord from the joint while working above it. Please specify what solution you would use and what software (if any) you will provide the data in.

I am looking for a professional to perform construction take-offs for my project. Specifically, I need a take-off of the quantities of materials needed. Structural analysis is not necessary at this time, and I require a high level of accuracy. As such, the ideal candidate would be experienced in performing these types of take-offs and have an eye for detail. If you have experience in this area and excellent skills with accuracy, I would be very interested in learning more about your services.

Construct a roof to cover deck, attached to existing house. I would also want to renovate the bathroom and build a garage next to the house. Preferably need someone who can help in securing the permits if needed. Budget is negotiable for now but willing to pay $30/hr

I need a cantilever checked and replaced to code.

Hello, my husband and I, recently bought a single family house in a Phoenix Historic District. We are applying for a Demolition Permit and we need to submit a Professional report substantiating the condition of this property, by a registered professional engineer or licensed architect. We need to hire a Structural Engineer or licensed architect to inspect the building and provide a report detailing the current status of the building, walls, foundation, footings, and roof structure. This report should also detail recommended ways to make the building safe and secure, and determine how to make repairs. Thank you.

Needed: Structural plans for a 30x60 foot pole barn 4:12 pitch, 60# snow load roof Pier concrete foundation elevated flooring deck, 4 feet Needed are all plans, structural, foundation, electrical, plumbing Plans MUST be stamped by a licensed California Engineer

I need a structural engineer to design foundation plans with loads per State of Ohio, US code for 2 residential homes I have designed. Home plans attached

I purchased a prefabricated metal building to use as a warehouse and will be located in Raleigh, NC. I need a few things: 1. A full site construction package 2. I need the building drawings to be verified and stamped with the NC seal for my construction permits including the foundation plan (I have these drawings in CAD and PDF format) 3. I need to create the mechanical, electrical, and plumbing drawings I can provide the CAD files once agree on project/pricing

I need Structural engineer expert in STAAD pro to do calculations report of steel structure. I will share the details to the suitable engineer.

I would like to add 2 skylights to the attic

1) MUST BE a state of colorado certified structural engineer 2) Deck Structure size 5X12 3) Carries Roof above deck with 2/12 pitch 4) Home is Balloon framed with floor joist face nailed to studs to the inside, with no rim joist on the outside 5) would prefer a filch plate design and/or blocking to mount ledger blocks to push lvl ledger outside foam insulation layer 6) will require wet seal plans (5 copies) for building dept approval

Structural drafting of GROUND FLOOR and first floor beam and slab details in longitudinal section.i need section of beam both longitudinal section.

We are looking for hydropower & irrigation civil design engineers for indian projects. Candidates should have a graduation in civil engineering followed by relevant design experience on irrigation or hydropower projects. Must be able to carry out structural as well as hydraulic design using excel sheets and / or software. Sample files below.

We are looking for a mechanical and/or structural engineer for a long-term collaboration and possibility for full time work, based in Indonesia. Our projects are on-going and exist mainly through skatesport facility construction. Profile; - Experience with light-weight steel construction projects. - Excellend English proficiency in both writing and speaking. - Relevant experience; at least 5 years. - Management skills; ability to lead a team. - Able to travel if needed, to quality control the project at the production facility. - Versatile work ethic; no 9-to-5 mentality. If you are interested in this offer, please respond with feedback on the points listed under "profile." Hourly or project-based prices are discussible.  We look forward to...

We are looking for a civil engineer for periodic consultancies. Requirements: - excellent knowledge of UFC - well acquainted with UFC certifying bodies

Oakfield Mansions is a 15 unit block of flats formed from 3 semi-detached Merchant houses circa 1840. The original buildings had servant quarters and associated cellars on the ground floor the upper 4 floors were used by the families. During the conversion process late 1970's/1980's there was a major rebuild of one of the houses due to structural issues. As a consequence of this work the cellars were destroyed. On completion of the work the cellar area was filled with rubble and spoil. A reinforced concrete slab was cast over the area of the cellar and now forms part of the car park. Work is now being undertaken to bring the cellar area back into use by removing the rubble, spoil and redundant shuttering from under the concrete slab. This has exposed the under side of the concr...

I am looking for a Fire engineer to design a fire strategy for a data centre compliant with UK regulation. I'm looking for someone that has already got the experience on writing fire strategies and knows the British regulation.

I am looking for an experienced Structural Engineer to conduct a structural analysis of existing reinforced concrete (RCC) bridges to perform a safety structural audit. The main focus is Performance/ Design Check using nonlinear dynamics analysis. Available Date is 1) On Site Measurement of all structural members 2) Non Destructive Test Reports (Material Properties). The engineer should have experience in Structural Analysis & Design of Bridges as Per IS Standard/ IRC Norms; Nonlinear dynamics analysis applying traffic loads; Preparation the analysis reports/ design check report; so that Remedial measure can be given on shortfall/failed members.

Looking to talk to a metals expert about various basic metals and suitability for our project, and want to get the high-level pros/cons, and learn a bit more about metals in depth. This would be for a cooking utensil, in the basic sense. We are developing a cooking utensil that will be used in extreme environments. We need a metals expert to guide us on what an appropriate material would be for this purpose, taking into account manufacturing complexity, costs, weight, longevity among key concerns.

One day training on RC Cad for BBS for walls raft piles beams columns

I need the urgent assistance of a structural engineer who can make calculations and reports with staad and do great structural analysis, thermal analysis, curtain walls and louver sections urgently...thanks

Need a Certified Floodplain Manager to confirm we don't need insurance since none of our surrounding neighbors are in the flood zone.

I need texas pe stamp for my project. Max buget for stamp is 70 usd.

Pe stamp for structural engineering drawing is required. Do mention your country and state with sending proposal. Else it will be simply rejected

Pe stamp for structural engineering drawing is required. Do mention your country and state with sending proposal. Else it will be simply rejected

A structural engineer for a foundation drawing project is needed. Engineer must have texas usa pe stamp.

We are looking for a mechanical and/or structural engineer for a long-term collaboration and possibility for full time work.  Our projects are on-going and exist mainly through skatesport facility construction. Profile; - Experience with light-weight steel construction projects. - Excellend English proficiency in both writing and speaking. - Relevant experience; at least 5 years. - Management skills; ability to lead a team. - Able to travel if needed, to quality control the project at the production facility. - Versatile work ethic; no 9-to-5 mentality. If you are interested in this offer, please respond with feedback on the points listed under "profile." Hourly or project-based prices are discussible.  We look forward to hearing from you! 

Need structural engineer to help us plan and design a retaining wall to stop erosion in our back yard. Wall would need to be 4+ feet tall and will likely be roughly 100 feet long.

A structural engineer for a foundation drawing project is needed. Engineer must have texas usa pe stamp.

i need a 75k office building mapped out, hvac, electric, etc. i have the preliminary floor plans but the suite

I need structural engineering that can provide pe stamps for texas.

I need a engineer to design and draw a 40 ft retaining wall using keystone that will satisfy the city of Encinitas

We're seeking someone to make adjustments to existing stamped structural drawings for a timber frame cottage building. We also have stamped mechanical drawings. We need adjustments to those plans, and we need architectural drawings for our permit application, floor plans, a roofing plan, foundation plan, decking plan etc. (to satisfy local requirements). Must have a BCIN.

As a Building Surveyor, you will join us on a full time basis and in return we will offer you a competitive salary and varied benefits package including car allowance. You will complete RICS homebuyers, building surveys and valuations. You will complete RICS homebuyers, building surveys and valuations. We are recruiting MRICS and FRICS Surveyors across the country to join our fast growing and forward-thinking company. Our workload will typically be 2-3 surveys per day, in addition to staying on top of your reports.

I need a structural engineer to design a beam and post system to support the roof load. The remodel consists of removing current beam and placing a new beam spanning a great distance.

Looking for a structural engineer that uses or Is able to use tekla structures and tekla design. We own both programs with international licenses. We design and manufacture fabric clad steel buildings. We have continuous work desining structures and producing drawing sets for projects in canada and USA. Please contact me for more information.

I need structural engineering that can provide pe stamps for texas.

We want to open up some load bearing walls for our renovation

We need a Civil draftsman for making drawings for our project in BPCL Mumbai Refinery

Need a digital (not just a wet stamp) for Florida for a single page drawing. All drawings and calculations already done. Also need to add a Wind Design Criteria used for the design.

I am looking for an experienced tekla structure coach to help me with my expertise. Although I have a beginner level of experience with tekla structure, I would like the teaching to be live-streamed in order to get the most out of the lessons. Therefore, I am searching for an experienced coach that can teach me and answer any questions I have regarding the software in an efficient and effective way. If you think you are the right person for the job and have the necessary skills and experience, please apply for the position and take this opportunity to expand your knowledge of this great software.

Hi we’ve been asked to produce some technical drawings for fabrication by our client. We need detailed drawings of the attached please. Please can we get a quotation on works