Simple SD Card driver code for STM32 Only paying a max of $35USD

$30-250 USD

Completed

Posted

7 months ago

$30-250 USD

Paid on delivery

I am looking for a freelancer who can help me with a simple SD Card driver code for my STM32F4 microcontroller. Specific requirements for the SD Card driver include basic read/write functionality. I need this project to be completed within a week. Ideal skills and experience for this job include: - Proficiency in STM32F4 microcontroller - Experience with SD Card driver development - Strong knowledge of C programming language - Familiarity with embedded systems and firmware development I am looking for someone to write an SDIO SD card driver operating in four bit mode for STM32F407, the code needs to be implemented in STMCubeIDE (latest version) I am only interested in getting the SD card working with FAT32 so I can read and write data to it, nothing more I will be writing the rest of the data acquisition code myself. I been trying to get the SD card working on an STM32F407VET6 using the SDIO bus (STM32F407VET6 black board pcb quite common on AliExpress) There are many free tutorials out there on YouTube and I found one from ControllersTech which usually some very good working tutorials, however their version apparently does not seem to work as I kept getting ERRORS when trying to mount the SD card or do anything with the SD card. I keep getting the same ”ERROR in mounting SD card”. To make sure there was no hardware issues I compiled a DataLogger example from Arduino that uses the SD card with SDIO and that works just fine but in my case I would like to make this work with standard C and using the STM32 Cubeide. This is not a a project for profit but something I am personally trying to use for myself todo some data logging. I am sure if you are knowledgable with the STM32F4 series and the STM32CubeIDE this code should not be a very difficult task. If you are confident in your skills and can meet the timeline, please reach out to discuss further details.

Electrical Engineering

Project ID: 37318118

About the project

16 proposals

Remote project

Active 7 mos ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

Awarded to:

@quocduypt95

Hello, I have strong experience working with STM32. I did a similar project: saving sensor data into SD 4 bit csv format over time. Will definitely make you happy. I have the hardware available to test. Please message me. You can see my some project in twitter: [login to view URL] and my freelancer profile. Thank you

$35 USD in 2 days

5.0

(12 reviews)

6.5

16 freelancers are bidding on average $108 USD for this job

@dslc

I don't have that specific ST development board, but I have worked with SD cards on STM32 boards in previous projects (mostly via the SPI interface admittedly, but CubeIDE makes it even easier to use the SDIO interface). I can either: 1. share a ZIP file of each version of the test firmware, or 2. share access to a Git repository with you. The latter option would be preferable if you are experienced with version control software. Since I don't have that actual board, it might take several iterations of the firmware to get it working. (I would be relying on your feedback and testing.) I am in Ireland. Please note the timezone difference.

$35 USD in 7 days

5.0

(15 reviews)

6.3

@faizanmaqbool695

I am working in Digital Electronic. So more than 4 years of experience in Electronics. Arduino NANO/UNO/MEGA, ESP32 and Raspberry PI to build a digital device to read sensor data and send it to the web server, motor control, control relay switches and LEDs. More than 5(five) years of experience in Arduino design and build. If you want an excellent and error-free project delivery, then send a message to me, please

$130 USD in 3 days

5.0

(51 reviews)

6.0

@engrhassanwali

Hello, and thank you for your inquiry! I understand from your project description that you are looking for someone to help you with a simple SD Card driver code for your STM32F4 microcontroller. Specifically, you require basic read/write functionality and need this project to be completed within a week. If you are concerned about the hardware compatibility of the SD Card driver code, please let me know and we can discuss further details regarding the project timeline. As a professional with extensive experience in the fields of Mechatronics, Robotics, Computer Science, Electrical Engineering, Control Systems, Signals and Systems, and Economy, I am confident that I can meet all your requirements for this project. With my skills in Fuzzy Logic, Neural Networks, Neuro-Fuzzy Systems, Kalman Filter and Smoother as well as Navigation of Mobile Robots path planning algorithms I am able to provide solutions for complex problems effectively. Additionally I have strong software skills such as VS Code which makes it easy for me to produce high quality solutions efficiently.

$250 USD in 7 days

4.7

(33 reviews)

6.0

@hayat38402

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

$140 USD in 7 days

4.6

(65 reviews)

6.1

@tshibsamuel477

I understand from your description that you are looking for a freelancer who can help you with a simple SD Card driver code for your STM32F4 microcontroller. Specifically, you need basic read/write functionality and need this project completed within a week. I believe I am the perfect candidate for this job due to my extensive experience in STM32 microcontrollers as well as embedded systems and firmware development. This makes me well-equipped to handle the project requirements at hand as I am proficient in STM32F4 microcontroller technology as well as having experience with SD Card driver development. Additionally, I have strong knowledge of C programming language which will be crucial for developing an SDIO SD card driver operating in four bit mode for STM32F407. I am confident that my skillset is capable of producing excellent results for you. If you would like to discuss further details please reach out to me directly so we can start planning our collaboration!

$35 USD in 1 day

4.9

(42 reviews)

5.4

@OmarFarukBD

I am ready to start working on the SD Card driver code for your STM32F4 microcontroller, implementing it in STMCubeIDE and ensuring FAT32 support for reading and writing data. I have experience with embedded systems and firmware development. Let's get this project done within a week.

$180 USD in 4 days

4.7

(2 reviews)

4.9

@engmahmoudsaber3

Welcome sir, I am writing to express my interest in offering my services as an Arduino programmer. I have a broad range of skills and expertise in programming robots, drones, and smart homes, as well as designing circuits using Fritzing and Tinker cad, and programming embedded systems. I am also a c/c++/python programmer With my knowledge and experience, I am confident that I can provide you with reliable and efficient programming solutions that meet your specific needs. My expertise in programming drones and unmanned aerial vehicles (UAVs) can help you develop customized solutions for surveillance, mapping, and inspection tasks. I am also experienced in programming smart home systems that can be remotely monitored and controlled to provide greater comfort and convenience. Moreover, I have extensive experience in designing and simulating circuits using Fritzing Tinker cad and Wokwi. I can help you create schematics, PCB designs, and simulations for your projects. My knowledge of embedded systems allows me to develop efficient and effective systems that meet your requirements. I am committed to delivering high-quality results that exceed your expectations. I strive to provide efficient, reliable, and timely solutions that meet your unique needs. I am confident that I can help you achieve your goals and bring your projects to life.

$100 USD in 3 days

4.7

(24 reviews)

4.4

@azraazeen9

Hello, i am ready exited to work you as i read your job description Simple SD Card driver code for STM32 I am also an expert in making 2d,3d modelling and animating characters 2dautocad drawing ,elevation, solid work, Revit ,FBX ,Unity, Render also interior and exterior design. I have experience in field of more than 5+ years. I can Create Intro and Explainer Videos. for products and companies. Kindly check My Portfolio as well. Hope for your very soon reply. Thank you

$120 USD in 2 days

4.1

(5 reviews)

4.2

@fadymmounir

Hello dear client , I am an embedded systems engineer with experience dealing with STM32 , ESP32 , and arduino . I have dealt with Blackpills (STM32F4 ) before , and I can help you do this job . kindly contact me so , I can help you build it up using stm cubeIDE

$30 USD in 7 days

4.9

(10 reviews)

3.6

@EngrUzair910

I understand you are looking for someone to help you with a simple SD Card driver code for your STM32 microcontroller and need this project completed within a week. As an Electrical Engineer with extensive experience in electronics, circuit analysis, Arduino, matlab & simulation software as well as custom projects I am confident that I can provide the best solution for this task. My skills include proficiency in the STM32F4 microcontroller, experience with SD Card driver development and knowledge of C programming language. Additionally I have familiarity with embedded systems and firmware development which will be useful when writing the SDIO SD card driver operating in four bit mode for STM32F407. I am available to discuss further details if this project interests you. Please feel free to contact me if you have any questions or would like more information on my services.

$140 USD in 2 days

5.0

(1 review)

1.6

@MilosDelic0203

Thanks for your posting with Simple SD Card driver code for STM32. I love United States and I'd like to work with United States clients. We would like to grab this opportunity and will work till you get 100% satisfied with our work. With extensive experience in Electronics, Microcontroller, Electrical Engineering, PCB Layout, Arduino I am confident that I can deliver the best result you are looking for. Please come over chat and discuss your requirement in a detailed way. Regards

$140 USD in 7 days

5.0

(1 review)

1.1

@fayyazs789

Hello Carlos B., I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Simple SD Card driver code for STM32 plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

$190 USD in 5 days

0.0

(0 reviews)

0.0

@orcunomersayin

I make this sdcard job with spi before. I'm expreinced with stm32 for a year. I make this project in 7 days for you.

$35 USD in 7 days

0.0

(0 reviews)

0.0

@GravityMon

So the arduini sample works fine but not the case when we try using stm32cube, right? No issues. Lets check it. I am an embedded firmware developer with 11 years of experience.

$35 USD in 7 days