STM32L1 Embedded Firmware Development Engineer

A proposal has not yet been provided

I have a lot of knowledge in the development of embedded devices for industrial environments , management of communication between peripherals , programming in C , C ++ , node js , javascript , application development under the raspberry pi platform , Arduino , Atmel , PIC, a lot of commitment and self learning, I have managed modules as sim5218 , SIM900 , Z -wave protocol

A proposal has not yet been provided

Hello, I have a strong knowledge in BootLoader, I2C, UART and RTOS. I did a Master degree in embedded systems and the most valuable knowledge I gained from that master is not to write an embedded code that works but to write a code that is easily readable, Easily maintainable, Modular and easily upgradable. I have been working in embedded systems teams where more than four developers will be working in the same software at the same time. I have a good experience in several teams source control software. I did an Embedded Systems course with the university of Texas in which the used processor was Cortex M4.

Hi... I have 5+ years of experience in the field of electronics. I am working on different industrial based project where my primary role was programming of different control board. I have worked on different platform, but since last two years i am professionally developing on STM32F controller. You can check out my portfolio for my work information and my qualification. I have worked on more then 55 projects based on STM32F4 controller including heartbeat monitoring system, chemical detection robot for pharma industry, autonomous robots, cap sense based home automation system, Industrial chiller controller, GSM security system and many more.(ask me if detail information is required) I have worked on GSM, GPS, USB, WiFi, Aceclerometer and obviously peripherals like UART, I2C, SPI, BootLoader. Expect your work done within deadline with best quality..... Please let me know any thing you need to know in personal message. And please message me detail requirement of your project, so we can discuss on it.... Thank You

I have experience with STM32L152RB device and its peripherals. I have experience in device driver design also. Please hire me.

12+ years of experience in firmware. handled most of the peripherals including power management for low power applications. very well experienced in IAR,KEIL,MPLAB development environment, expertise in developing platform independent code , useful in porting to different platforms.

Hi my name is Panagiotis, I have just finished my master is Embedded Systems and i am looking for something to spent my energy on. Your project caught my eye right away! I love programming in general, but having a system perfectly orchestrated is just magnificent. I am familiar and have used most of the technologies you mention and bringing all these together is challenging and i like it :). I have worked with peripherals like accelerometer, USB and WIFI. I have used I2C and UART on previous projects. I have used and programmed ATmega328 and ARM Cortex M3 processors using FreeRTOS. I have no experience with IAR since i have done all the programming in Keil. I satisfy the rest criteria you mention. Please take a look at my profile for a complete view of my experience. Since i am new in freelancer i have no reviews or statistics, but feel free to test and verify any of my skills. Best regards. //Panagiotis

Hello, I am electroncs and communication engineer. I have been working more than 6 years about embedded systems. I have already made several project with STML1 with HAL libraries. Yours Truly, Ali ŞERBETÇİ

Quick delivery with best quality. 24 hour technical support, live demo and user guide. as an expert in ARM programming,

Over 12 years of experience in electronics hardware and software design. Proficient in software and hardware design of embedded systems. Successful in planning and management of entire development and production cycle. Programming languages: C, C++, Ada, Pascal, MATLAB, GPSS, VHDL Processor architectures: 8051, AVR, ARM-M3, ARM-R4, ARM-7, x86, PicoBlaze, PSoC, PIC FPGA and CPLD architectures: Cyclone, MAX, Spartan, CoolRunner Set of rules to be stated before work: - All milestones should be backed up by you. So you release the money for milestones when you receive work done for each milestone and happy with it. - All decisions that I will make during the development that were not stated in project description I may do on my own understanding. I may ask you, if something was not described but not necessary I will do so. - Any changes that are to be entered by you for the project description, results, milestones, etc. after me accepting the project are subject to discussion and may lead to extra payment. - Next milestone work will begin only after finishing the previous one and releasing payment for it. - Prototype cost, delivery costs, components, PCB manufacture and other costs not connected with solely my services are extra payed when they are determined.

I have worked with different targets before and different micro controller at valeo, and also i have worked with a different drivers of the targets and micro-controllers families for more than 2 years.

A proposal has not yet been provided

Hi A freelance consultant working out of Bangalore. Involved in designing, coding, testing and implementation of embedded software projects Programming in C, Assembly Technologies: Languages -- C, Assembly Cross Compilers -- Keil, GNU gcc ARM, STVD Cosmic, IAR, MPLAB Hi-Tech C Micro-controllers -- AT91RM9200, LPC2148, LPC1114, LPC1788, LPC4088, STM32F03, STM32F103, STM32W103, CC2538, CC2530, STM8S003, PIC12F1840, PIC16F84, PIC16F877A, PIC18F450, P89V51RD2, AT89C51, AT89S51 Architectures -- Cortex M0, M3, M4, ARM 7, ARM 9, PIC 12, 16, 18, STM8, 8051 Debugger -- Lauterbach Trace32, JTAG J-link, ST-Link, PIC-KIT 3, GNU gdb Code Management -- PVCS, CVS, git, SVN Protocols -- UART, I2C, SPI, RS485 PCB -- Kicad Looking forward to hear from you. Regards, Milind

Have worked in ARM Cortex M controllers (M0, M3) in STM32 family. Interfaced peripherals like I2C(EEPROM), UART (RS485, WiFi, GSM) NOT worked in GPS, Iridium, USB, Acclerometer Partially worked in SPI (nRF24L01+ module) and FreeRTOS Worked with Keil and CooCox IDEs (NO experience in IAR, but can work - with short learning curve). I have also worked in hardware (circuit design based on Cortex M0, M3), i can understand/correlate SW problems easily.