FIPY and PI Project

Create program as attached in document to beacon on Wifi 2.4Ghz, a specific HEX including the units mac address, at a rate that can be programmed from 1 sec to 300 seconds, variable out put power, selectable channel/Channels Read other units beacons and store to SD card database for storage and uploading to server MSSQL database. Record beacon, time stamped, with RSSI reading Setup Transmission of an SMS service over the 2.4Ghz Wifi station (that is also doing the beaconing) SMS to have 10 different messages for responding using 3 different button funtions, up, down and ok. Messages to display on LCD screen Windows based SMS text messenger to send over wifi 5Ghz Wifi to be setup as an Access point for local, configure SSID and password. network traffic connection, bridge to 2.4Ghz wifi, and LORA Configurable LORA Station on or off Beacon on Bluetooth all modes same details as wifi, also record beacons from nearby Bluetooth and BLE devices to SD for database sync Sync via wifi Sync to an NTC time server syncefor accurate time logging Add Canbus logging to Pi software and server sync for the vehicle. See sheet for logs to retrieve from BUS Add in IO input monitor for "Battery on" and "Ignition On"