Ac6 SystemWorkbench to be able to write a compiled program to stm32

I am able to upload a program using st-link application however if I upload within eclipse AC6 as provided by ST I get the following errors With a generic stlink v2 Open On-Chip Debugger 0.10.0-dev-00019-g5352c55 (2019-02-14-15:45) Licensed under GNU GPL v2 For bug reports, read [login to view URL] srst_only separate srst_nogate srst_open_drain connect_assert_srst Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD adapter speed: 8000 kHz adapter_nsrst_delay: 100 Info : clock speed 8000 kHz Info : STLINK v2 JTAG v29 API v2 SWIM v7 VID 0x0483 PID 0x3748 Info : vid/pid are not identical: 0x0483/0x374B 0x0483/0x3748 Info : using stlink api v2 Info : Target voltage: 3.237945 Error: init mode failed (unable to connect to the target) in procedure 'program' in procedure 'init' called at file "embedded:[login to view URL]", line 485 in procedure 'ocd_bouncer' ** OpenOCD init failed ** shutdown command invoked With a STM32L053 Discovery Info : STLINK v2.1 JTAG v33 API v2 M25 VID 0x0483 PID 0x374B Info : using stlink api v2 Info : Target voltage: 3.215213 Info : Unable to match requested speed 8000 kHz, using 4000 kHz Info : Stlink adapter speed set to 4000 kHz Info : [login to view URL]: hardware has 4 breakpoints, 2 watchpoints Error: timed out while waiting for target halted TARGET: [login to view URL] - Not halted