Freelancer logo How It Works Browse Jobs
Log In Sign Up
Post a Project
Profile cover photo
You're now following
Error following user.
This user does not allow users to follow them.
You are already following this user.
Your membership plan only allows 0 follows. Upgrade here.
Successfully unfollowed
Error unfollowing user.
You have successfully recommended
Error recommending user.
Something went wrong. Please refresh the page and try again.
Email successfully verified.
User Avatar
$28 USD / hour
Flag of ARGENTINA
don torcuato, argentina
$28 USD / hour
It's currently 7:19 AM here
Joined November 17, 2016
0 Recommendations

Diego L.

@delcti

 5.0 (9 reviews)
5.7
5.7
100%
100%
$28 USD / hour
Flag of ARGENTINA
don torcuato, argentina
$28 USD / hour
100%
Jobs Completed
100%
On Budget
100%
On Time
13%
Repeat Hire Rate

Expert in Finite Element Analysis (FEA)

If you are looking for exact results in simulations, or find the solution to a problem of engineering or simply make a CAD design, then you are in the correct profile. I perform simulations using the Finite Element Method in COMSOL Multiphysic, Ansys, Maxwell, Amperes and MagNet. Common areas of FEA: Finite Element Method Magnetics (FEMM) Computational fluid dynamics (CFD) Structural-Mechanics Engineering Analysis Electronic Engineering Analysis. Medical FEA (extraction of 3D model from DICOM data) I also have services oriented to the design of robotics products and process automation. Programming Microcontrollers    IDEs: MPLAB - MPLAB-X, IAR, mikroC, CCS    Programming languages: Visual Basic, Assembler, C    Technologies: Microchip, ARM Electronics    General Electronics    Power Electronics    Digital Electronics Design, Simulation Altium Designer (Altium) Proteus (Labcenter Electronics) SpaceClaim (ANSYS) AutoCAD (AutoDesk)
Freelancer Finite Element Analysis Engineers Argentina
See all Finite Element Analysis Engineers in Argentina

Contact Diego L. about your job

Log in to discuss any details over chat.

Portfolio

4750510
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
4750580
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
4750563
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
4750521
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
4750499
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
4154374
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
4750510
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
Analysis of Proton Exchange Membrane Fuel Cell (PEMFC), optimization of current density by parametric geometry
Proton-Exchange Membrane Fuel Cell (PEMFC) in COMSOL
4750580
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
An electromagnetic and mechanical multi-phisycs model was made to study the deformation of a coil coated in epoxy resin before a high power pulse. The elastic deformation effects are caused by the force of Lorentz between each wire loop.
Analysis of high power coil in COMSOL
4750563
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
Two models were created, one 2D Axis-symmetric and one symmetrical 3D, the latter is the real representation but the Axis-symmetric allows a good approximation for optimization, reducing time. The losses in the core due to the Facault´s currents and in the windings due to the Joule effect are analyzed. The dispersion reactances are also analyzed for analytical comparison and total flow in each domain of the model.
Simulation of isolation transformer in COMSOL
4750521
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
Only the lower jaw was extracted by manual methods and layer interpolation from DICOM data from a skull tomography. The brackets that were present in the DICOM images have been removed. Once a faceted model was obtained, it was solidified by two methods, 1. No fusion of faces 2. Reverse engineering with vectors
Generation of 3D model of mandible from DICOM data
4750499
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
An investigation was made for the implementation in human body, followed by finding the analytical solution for the elastic behavior. It was modeled in SpaceClaim and simulated in Ansys and Comsol (I have not loaded images). The project analyzes the behavior of nitinol and performs the simulation of the manufacturing process and tempering until the operation in the human body.
Simulation of biomedical NITINOL stent in ANSYS
4154374
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator
Creation and modeling in Space Claim of a residual heat recuperator for photovoltaic panels. In addition to the design, documentation is provided that justifies the model, as well as the manufacturing method, material costs and reaction studies of the components with the refrigerant fluid. The design complies with the ASME API standard
3D design and model justification Residual Heat Recuperator

Reviews

Changes saved
Showing 1 - 5 out of 9 reviews
Filter reviews by:
5.0
$627.00 USD
Project for Diego L. -- 4
This is my 5 th project with him, so that should speak a lot than giving feedback.
Engineering
CAD/CAM
Finite Element Analysis
3D Modelling
+1 more
User Avatar
Flag of Alchemy S.
@iMaestro
•
5 years ago
5.0
£710.00 GBP
Project 17291854 has been deleted
Diego is an excellent professional. His knowledge is very profound, apart he is a great person. I wouldn't hesitate to hire him for my future projects. The job was delivered on time with the highest quality. Very much recommended.
User Avatar
Flag of Susanna G.
@SueG18
•
6 years ago
5.0
$165.00 USD
Project for Diego L. -- 3
Diego A+++++
Engineering
CAD/CAM
Finite Element Analysis
3D Modelling
+1 more
User Avatar
Flag of Alchemy S.
@iMaestro
•
6 years ago
5.0
€270.00 EUR
Project for Diego L.
Strongly recommended freelancer. All given assignments and more have been done perfectly. Diego is experienced professional and always delivers results on time.
Engineering
CAD/CAM
Finite Element Analysis
3D Modelling
+1 more
User Avatar
Flag of Arunas M.
@ArunasM
•
6 years ago
5.0
$165.00 USD
Project for Diego L. -- 2
He is perfectionist, delivers excellent report beyond expectations, next phase of work already awarded to him, which should speak a lot than this feedback.
Engineering
CAD/CAM
Finite Element Analysis
3D Modelling
+1 more
User Avatar
Flag of Alchemy S.
@iMaestro
•
6 years ago

Experience

CEO | CTO

Accuracy Finite Element Analysis
Nov 2017 - Present
Research, development and innovation in engineering. We provide consulting services, training and development of engineering projects. • Design of industrial models • Electronic Design (Hardware, Firmware, Software) • Electronic Engineering Analysis. • Numerical Analysis using the Finite Element Method (FEM) • Finite Element Method Magnetics (FEMM) • Computational fluid dynamics (CFD) • Structural-Mechanics Engineering Analysis • Medical FEA (extraction of 3D model from DICOM data)

System Manager

DELC
Dec 2009 - Jun 2017 (7 years, 6 months)
IT services for companies and institutions. • Technology team manager • Creation of corrective and preventive maintenance plan of computer infrastructure • Implementation of ERP for incident management and technical assistance service TAS • Software development • Development of electronic projects (IOT, DSP, RTOS, etc.) • Specific technology projects

Project Leader, Programmer and Functional Analyst

IBM S.A
Aug 2006 - Jun 2009 (2 years, 10 months)
Projects: • Project leader in Computed Metrics (Java and Rational Clear Quest) for IBM • Clipper, RPG, .NET Developer for McDonald's • Java EE developer for Orange Spain • Java for IBM personnel training and courses • Development and administration of Siebel Enterprise Server on Unix platform for Telecom Personal S.A.

Qualifications

ABAP IV

IBM
2007
Capacitación de ABAP IV 176hs

Java

IBM
2008
Capacitación de Java Nivel intermedio 176hs

Contact Diego L. about your job

Log in to discuss any details over chat.

Verifications

Preferred Freelancer
Identity Verified
Payment Verified
Phone Verified
Email Verified
Facebook Connected

Certifications

preferredfreelancer-1.png Preferred Freelancer Program SLA 1 97%

Top Skills

Finite Element Analysis 9
Engineering 7
CAD/CAM 6
3D Modelling 5
Mechanical Engineering 3

Browse Similar Freelancers

Finite Element Analysis Engineers in Argentina
Finite Element Analysis Engineers
Engineers
CAD/CAM Designers

Browse Similar Showcases

Finite Element Analysis
Engineering
CAD/CAM
3D Modelling
Previous User Next User
Invite sent successfully!
Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Freelancer logo Pakistan / English Help & Support Freelancer Categories Projects Contests Freelancers Enterprise Membership Preferred Freelancer Program Project Management Local Jobs Photo Anywhere Showcase API for Developers Get Verified Desktop App About About us How it Works Security Investor Sitemap Stories News Team Awards Press Releases Careers Terms Privacy Policy Terms and Conditions Copyright Policy Code of Conduct Fees and Charges Partners Escrow.com Loadshift Warrior Forum Apps Apple App Store logoGoogle Play logo
Copy to clipboard failed, please try again after adjusting your permissions.
Copied to clipboard.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.