Find Jobs
Hire Freelancers

PCB routing and Gerber files

$30-250 USD

Completed
Posted over 4 years ago

$30-250 USD

Paid on delivery
Please, read in full so your submitted proposal won’t be rejected instantly. Also, please do not respond with the general copy-paste text. For my personal project, I’m looking a guy who could route the PCB, ideally in KiCAD, and prepare Gerber files. Hard part of this project is two PCBs (hard and flex) which need to be connected. So, some sort of plated VIAs. All LEDs will be on a flex PCB. All components on a hard PCB. What will be provided: 1. DXF/DWG of the PCBs outline. 2. Schematic (in KiCAD). 3. 95% of component pads (in KiCAD). 4. BOM with links to Digikey. What is this: It’s LED flash/lighting device for outdoor use. What you will be working with: MicroUSB, Microprocessor, LED driver, 8 LEDs, buttons, hard and flex PCB, etc.
Project ID: 22444615

About the project

20 proposals
Remote project
Active 4 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Profile : ---------- over 15 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs, signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation. Educational Background : ------------------------ Bachelor Degree in Electronics & Communication Engineering Layout tool supported : ----------------------- PADS Layout 9.5 (Basic) Pads VX2.1 standard ORCAD PCB Designer 16.6 ORCAD PCB Designer 17.2 Pulsonix 10.0 Eagle Kicad Schematic tool supported : -------------------------- Orcad Capture 17.2 Pads Dxdesigner VX2.1 standard Pulsonix 10.0 Eagle Kicad Services Offered : ------------------ Footprint Creation. Netlist Import, DXF Import, Place, Route ,Gerbers and TQ closure. PCB Layout Review. Minimum Required Inputs : ------------------------- A top - level functional block diagram Schematic Netlsit BOM Mechanicals Impedance Information Current Consumption on each voltage rail. Target fabrication house - capability report
$150 USD in 7 days
5.0 (38 reviews)
5.9
5.9
20 freelancers are bidding on average $182 USD for this job
User Avatar
Hi There, we have gone through the project requirements, we can easily do the PCB routing for flex PCB as well as for FR4 PCB. is it compulsory to use Kicad? We can import DXF files in our CAD tool (Proteus). The deliverable will be set of gerber files required to print PCBs. As far as connection between FR4 PCB and flexible PCB is concerned it can be done through a connector like we do with cameras on raspberry pi. Please feel free to contact us. Regards, Shahbaz.
$300 USD in 10 days
4.5 (56 reviews)
7.0
7.0
User Avatar
Hello, i have read and understood your requirements, you need an expert to route the PCB in KiCAD, and to prepare Gerber files. I am an electronic engineer with 6+ years experience in this field. I can deliver this work perfectly. Please open chat window for further discussion about budget and timeline.
$100 USD in 3 days
4.9 (95 reviews)
6.2
6.2
User Avatar
Hello, I have working Extensively with KICAD in recent 2 years for most of my projects. So, without a doubt I'm very familiar with KICAD. Regarding to Microprocessor, we can use either simple ATMEL ATMEGA, stm32, or whatever you are comfort to work with. another components, we can choose which package you are prefer, either THT or SMD is fine. I have 8 years experience on PCB design. I have designed various projects from hobbyst to military standard. Let me know your thoughts,and let's discuss the details over chat. Best Regards, Rijal
$150 USD in 3 days
4.6 (83 reviews)
6.8
6.8
User Avatar
We are a team of engineer experienced in electronics, circuit design, PCB design, micro-controller programming, Arduino and wireless protocol. We have designed and developed circuits and products in the field of wearable, smart devices, home automation, power electronics, motors, IOT and sensor. We have designed a similar application where we build two pcbs circular in shape and stacked up. In order to connect two board we have used smaller pitch headers. The 1st board consist of MCU, USB, regulator and sensor while the 2nd board had LED's and its driver IC. Both are communicating using I2C. The entire design is done on KiCAD ( can share pictures of the board for reference). So based on this experience I think we can build the current board as well and since we have already build similar design, we also have good understanding of the restriction and points to remember while building the layout. We are capable of designing single, double and multi-layer boards using KiCad tools Along with designing we also support for pcb manufacturing / fabrication and component assembly of the board. Queries: 1. To connect the two boards, can we use header or do you want to use only vias? 2. Time line of the project? Please reply to our queries for our better understanding of the project and for the best results Looking forward to hear from you and for further discussion. Thank you.
$150 USD in 5 days
4.7 (23 reviews)
4.9
4.9
User Avatar
Hi, I can do your project in Altium Designer. I have an experience with flex+hard PCBs development. I can move your project from KiCAD to AD if you wish.
$500 USD in 7 days
3.2 (12 reviews)
5.7
5.7
User Avatar
Hey, I have read and seen all the images which you have attached. I would like to work on this project as I am also experienced in KiCAD software. This project is also challenging so I am excited to work on it. Please let me know more about this and I will start working.
$80 USD in 7 days
4.7 (4 reviews)
2.3
2.3
User Avatar
Hello! I am a professional and experienced PCB designer. I have experience working with PCB designs using Kicad, Altium, Eagle, Proteus, and other top-ranked software. I've read your description about Flex PCB and hard PCB, I can do the job as I think it matches my expertise. I would like to work with you on this project. I can show my previous work. Please write to me for more details. Regards
$110 USD in 2 days
5.0 (2 reviews)
2.3
2.3
User Avatar
I have Just read project description. And I think it will be an easy project for me. I design Schematic and PCB on Eagle, KiCad, and ORCAD. I can complete your project with perfection. Hi, I am an Electrical and Computer science Engineer with experience in PCB designing and Electronics circuit designing. My key skills are Documentation design, component selection, Schematic entry and design entry, BOM preparation, Test document preparation, Board Bringup and Testing and debugging. Recently I completed one Wifi Based project(Schematic plus PCB) and one GSM based project. If you want I can show you Images of project. Reason for bad review: I completed 16 power relay project(Check it into my profile) but due to some payment issue I have to stop my project from delivery as you can see it into my profile rating. Client didn't even create milestone. At starting he agree to pay me before project delivery but after I finish the project he start avoiding my messages so this force me to stop my project from delivery. I hope you will understand. I lost 85$ in that project.
$220 USD in 20 days
2.2 (2 reviews)
2.3
2.3
User Avatar
Hello, I see you are looking for someone who can route the PCB using KiCAD and prepare Gerber files for Hard and Flex PCBs. I am very confident about your project because I have developed lots of PCB prototypes and I am familiar with schematic design, PCB design, flex PCB design, and product design. I am sure that your project is a good fit for my skills and experience. I will deliver the best results you desire within a short amount of time successfully. Looking forward to your response. Regards. Jesse
$140 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have a good experience in kicad. And i designed PCB layout for the solar charge controller, micro-inverter, LED street lights. We have a good team of members working on PCB designs at various levels. Here we are giving the assurance to the quality of the work. And revisions are also provided time to time according to the requirement We will support even after the completion of the project. Share more details about your project.
$140 USD in 4 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Deliver you the gerber files even before the dead line and posible sugestions about de desing, i'm Electronic Engineer from the slaughter university in Buenos Aires and im looking for some extra Job.
$150 USD in 20 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, I am quite new here. I have master degree from EE department in the field of RF electronics and high power circuitry. According to your needs mentioned in the description, it won't take too much time to complete the project. I am fluent severel CAD tools including KiCAD. By having deep experience in PCB design and analog electronics, I believe i can satisfy your project requirements and lead your project to the accomplishment in short time period. I am appreciated, if you contact me to discuss the details of your needs. Regards, Erdem
$120 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I am Amit from India and have 7 years of Experience in PCB Design i can help you in PCB Design+ Gerber Generation and manufacturing and testing of the PCB and PCBA designed.
$220 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hey, I have previously worked on rigid-flex/flex PCB. If you want rigid-flex PCB we need to design 4 layer PCB and 2 layers are appropriate for separate rigid and flex PCB attached with connector. I also went through your schematic, and I believe we can achieve the desired design, it would be great if you provide a pdf of the schematic. I can complete this project and provide Gerber files within a week.
$150 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I have 28 years of R&D experience in hardware and Firmware design. I have worked with several Processors, microcontrollers and FPGAs'. I have worked with Mentor PADS, Altium and Orcad for PCB design. But I can easily work with KiCAD as its much simpler software compared to Protel DXP Designer, Mentor PADS etc. have designed 18 layer PCBs with Intel processor, Kintex7 FPGA , DDR3 memories etc. Till date I have designed more than 100 PCB designs.
$250 USD in 21 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I am an expert in KiCad. I am experienced RF Electrical Engineer. The schematics and layouts are my strong points. I will update the library both schematic and layout and generate the Gerber files. Also, I will recommend suggestions for manufacturers. It is good for you that you prepare schematic and layout placement. I need the real schematic.
$140 USD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
Renton, United States
5.0
3
Payment method verified
Member since Feb 1, 2019

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.