Prepare a 2 part vector file for laser cutting machine

In Progress Posted 5 years ago Paid on delivery
In Progress Paid on delivery

I need someone to prepare a 2 part vector file for laser cutting. They have specific instructions for the laser cutting machine.

I am wanting to get a pair of flip flops cut from acrylic and need the two parts of the vector, the base and the strap. Approx 3cm in height. I will be gluing the pieces together.

Doesn't need to be in colour as it's just to submit to the laser cutting company.

Attached is the vector file template, open it with a vector program (e.g. Gravit, Adobe Illustrator, Corel Draw, etc).

This document is 600mm x 300mm, and in RGB colour mode.

I require someone to format my flip flops for laser cutting by setting up cut lines, the base and the strap will need to be on two different templates as they will be cut from two different coloured acrylics. The base of the flip flop is to be approx. 5cm and then the strap the correct ratio so I can glue them together. I need one template to be covered in the base of the flip flops, and one template to have enough straps to go with all the bases.

• All cut lines are to be RED (255, 0, 0) 0.1pt stroke.

• Leave at least 1mm between each shape, and stay within 2-3mm from the edges.

• Completely remove any lines in your file that are not required, including any duplicate lines (the laser will cut every red line in your file, even if they are hidden by a shape or clipping mask). Duplicate cut lines may cause burning and scorching from excessive cutting.

Start in the top left hand corner

Arrange the file in columns, starting in the top left hand corner.

Leave 2-3mm from the material edge

My shapes have to physically fit within the size of the material, so leave a 2-3mm margin around the edge of your artboard. In the file template, this is demonstrated by an orange rectangle (so fit the shapes within the orange rectangle).

Arrange the shapes in columns

Working from the top left hand corner, arrange the shapes from top to bottom, left to right.

Tessellate shapes to fit closer

Try rotating your shapes to tessellate them to fit closer together.

Save Your File

Ensure that you preserve the illustrator editing capabilities and include any linked files. Vector file formats could include AI, EPS, SVG, DXF, DWG, and PDF (if the PDF was created in a vector program).

If any of this is unclear please ask questions.

Thank you.

Graphic Design Illustration Illustrator Logo Design Photoshop

Project ID: #18467819

About the project

32 proposals Remote project Active 5 years ago

Awarded to:

marsupialdesign

hello i have cutting machine in my office don't worry. it's easy for me to realise what you want just send me a message

$20 AUD in 1 day
(0 Reviews)
0.0

32 freelancers are bidding on average $24 for this job

DezineGeek

I have checked the files and yes i am ready for that. You can check our past work and reviews on this link: www.freelancer.com/u/DezineGeek • Price is always Negotiable. • Quality and Perfection is Guarante More

$50 AUD in 1 day
(4932 Reviews)
9.8
giritech

HELLO, I have read though your job description and understand that you want graphic quality design . I can do it and ready to start work immediately. The design provided will be creative and according to your re More

$25 AUD in 1 day
(1658 Reviews)
8.4
Arsen68

Hi there, I'm interested to do this design job for you. After I deliver you flip flops in vector following instructions, I'll do revisions if needed.

$30 AUD in 0 days
(833 Reviews)
7.5
Graphikqueen

Hello sir ALL WORK IS DONE BEFORE DEADLINE I WILL GIVE YOU FIRST DRAFT IN 4-5 HOURS i have read your project regarding Prepare a 2 part vector file for laser cutting machine. I will start work asap.I will r More

$17 AUD in 0 days
(507 Reviews)
7.3
mvraju2017

Hi, First of all, thanks for taking the time to review my proposal and would like to work in your project titled "Prepare a 2 part vector file " with project id "18467819". I have understood your requirement from the More

$30 AUD in 0 days
(481 Reviews)
6.7
MagicArt178

Hi, I have read Your project description regarding Prepare a 2 part vector file for laser cutting machine. I am very interested in your project and also I am ready to start immediately. I will give you high quality More

$30 AUD in 1 day
(239 Reviews)
6.8
GraphicLand12

Hello (EXPERT IN GRAPHIC DESIGN) I have read Your project description regarding prepare a 2 part vector file for laser cutting machine. Design # Work On Time # Within Budget # Attention to customer requirement . More

$24 AUD in 0 days
(289 Reviews)
6.7
iMacmania

Hi, I have read your requirement. I have worked on similar project. I have a lot of experience. I can work on your task. I can complete your work within 0 day and also with good quality. Check out my profile to see More

$15 AUD in 0 days
(125 Reviews)
5.8
Desi9Force

Hi, Thanks for reviewing proposal. We are a team of 10 talents specializing in graphic design, logo, branding and print. How we operate: Project brief is shared with In-house design team of 10 creative designer More

$25 AUD in 1 day
(188 Reviews)
6.0
stonedesigner

Hi, there! Nice to meet you! My name is Ivan. I'm from Bulgaria, Europe. I'm a professional designer and I have a long experience in vector works. If interested, please, contact me. Kind Regards! Ivan K.

$19 AUD in 1 day
(38 Reviews)
5.9
Dylanteoh

I understood your requirement and I've done this similar job before in film processing company and also sticker cutting. BUT I have some question, 1) You need your base to be 3 cm height or 5 cm height? 2) Acc More

$25 AUD in 1 day
(36 Reviews)
5.9
Nandhini1999

I would love to work on your vector file for laser cutting machine project. I have read through the job details carefully and I am absolutely sure that I can take up and complete your project. I can do vector file fo More

$10 AUD in 1 day
(91 Reviews)
5.2
omniscient04

Hello I am a highly creative and innovative graphic designer and I will work on your project till you feels that you get your designs. You just needs to tell me what idea you have in your mind and I will take care of More

$10 AUD in 1 day
(131 Reviews)
5.1
webexpert1301

Hi I have read Your project description regarding 2 part vector design. I m expert in this filed and i can do it as per your requirement. You can check my freelancer portfolio for my previous top quality work. I a More

$30 AUD in 1 day
(76 Reviews)
5.8
harkaur13011997

Hello, I recently came across your job at freelancer for a graphic designer, and would like to submit my resume and application for your job After perusing your requirements, I feel that my qualifications and work exp More

$30 AUD in 1 day
(34 Reviews)
4.2
sehbaaz652

Hi, I am Sehbaaz and i am well-experienced Graphic Designer. I have an ideal prospect and am ready to accept any new challenges that may be put in front of me i am always working on my full potential to produce the b More

$10 AUD in 1 day
(29 Reviews)
3.4
xabhix

hello sir, my name is abhishek and I'm am an experienced mechanical design engineer. I have checked project and I can create a dxf file for laser cutting. I will complete it in less time. message me for more details... More

$30 AUD in 1 day
(4 Reviews)
2.7
AldersonSantos

Hire Me Available for immediate start. I work with quality and speed. See my portfolio. I make a free demo! I'll deliver in 1 hour. I await contact.

$15 AUD in 2 days
(4 Reviews)
2.3
umairrana40

Yes I will do this task ASAP as per your instructions. I can deliver you my sample work or you can visit my portfolio. Please give me a chance to serve you, you would love my work and I am sure you would love to work w More

$20 AUD in 1 day
(0 Reviews)
0.0
mahathekhan2017

Dear Sir, It would be ideal if you acknowledge my application for the Graphic Designer part publicized on freelancer.com. Subsequent to perusing the expected set of responsibilities, I am certain that I would be an More

$20 AUD in 0 days
(0 Reviews)
0.0