Find Jobs
Hire Freelancers

Altered Facility/ Lease Improvement Plans

$30-250 USD

Closed
Posted almost 5 years ago

$30-250 USD

Paid on delivery
This is a job to draw plans for a existing retail space to become a bake shop/ cafe. Plans will need to have a 3 compartment sink, utility/ mop sink, and 2 hand washing stations installed. We already have the plans made we just need them drawn to submit application for permits. Plans will need to appropriately display the building specs for inspectors. Please list relevant electrical and plumbing information; as business is required to list commercial equipment use on the buildings electrical system, and provide a water safety plan. We can provide a digital sketch of the existing space if necessary. we do have a way we would prefer the kitchen to be set up. Please be a Ohio certified and licensed architect (must provide proof). Dishwashing sinks: A 3-compartment sink designated for dishwashing is required in any operation that sells or serves unpackaged food. The sink should have curved interior edges and at least three (3) compartments for washing, rinsing and sanitizing. The sink should also have two (2) drainboards, one for collection of dirty dishes and the other for air drying. See the example on page 13. Dishwashers are optional, but a 3-compartment sink is required in a facility that sells or serves unpackaged food. Each compartment of the sink must be large enough to submerge the largest piece of equipment you have (i.e. a small bar sink would not be acceptable for washing large pots and pans). HELPFUL TIP: Columbus Public Health requires dishwashing sinks and dish tables to be installed at least 4 inches off of the wall with brackets. Utility sink: Also called a mop sink or service sink, all facilities are required to have a sink designated for cleaning of mops and cleaning tools, and for disposal of mop water. The utility sink must include a faucet and drain. This sink should have hooks or other means to allow mops to air dry. HELPFUL TIP: A curbed sink provides an easier means to dump mop water, and is a good storage spot for the mop bucket when not in use. Utility sink: Also called a mop sink or service sink, all facilities are required to have a sink designated for cleaning of mops and cleaning tools, and for disposal of mop water. The utility sink must include a faucet and drain. This sink should have hooks or other means to allow mops to air dry. HELPFUL TIP: A curbed sink provides an easier means to dump mop water, and is a good storage spot for the mop bucket when not in use. Hand washing sinks: All facilities are required to have adequate employee hand washing sinks, conveniently located in each food and dishwashing area, and equipped with soap and disposable towels or hand dryers. Convenient location indicates that the sink is accessible and visible from any food area, including bars and ice dispensing locations such as wait stations. These sinks are required to have signs reminding employees to wash hands. Exception: In facilities that serve only prepackaged foods, a hand sink is only required in a restroom. HELPFUL TIP: Each sink described in this section can only be used for its designated purpose (hand washing, dishwashing, food prep, mop sink). Ventilation hoods: (NOT SURE WE NEED) A ventilation hood is required at a grill line, or where other cooking equipment and high temperature dish machines are located, to prevent the accumulation of grease, heat, condensation, smoke and vapors. Installation of a ventilation hood requires a permit and inspections. Contact Building Services (phone numbers on page 2) with questions about ventilation requirements or permits for installation. HELPFUL TIP: Ventilation is always required for gas equipment.
Project ID: 19981199

About the project

7 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
7 freelancers are bidding on average $217 USD for this job
User Avatar
Hello We have reviewed your bake shop/cafe design project brief and are interested in working with you. Please contacting us so we can discuss this project in more details. We have over 15 years of experience in this arena and many testimonials from satisfied clients. We guarantee 100% dedication to your project. Take a look at our past work on our portfolio: https://www.freelancer.com/u/dreams3ds We look forward to working with you! Sincerely ARCHVISION3D
$350 USD in 5 days
5.0 (362 reviews)
9.3
9.3
User Avatar
Hi, I am an Architect (From 2012-present) I have experience in design, modeling, rendering, animation architecture buildings, houses, shops...etc I have skill in 3Dsmax, Sketchup, Lumion 3D, Revit, Auto Cad... I always try by all my best to do everything you want, pls see my portfolio, PM ME FOR MORE DETAIL A lot of projects are done with the best quality Hope to work for you ... Best Regards Nam Architect
$250 USD in 7 days
4.7 (166 reviews)
6.8
6.8
User Avatar
Good Day ! I am an Architect by Profession. I have a 15 years of experience in Design and Construction Industry. I am excellent in AutoCAD Software and Space Planning that is my strongest skills to help you out accomplishing your Project. I can help you to finish this work and deliver this in a minimum timeframe. Hope to hear from you regarding my proposal so we can collaborate with each as soon as possible. Gospeed! arkitek FRIDAY
$250 USD in 3 days
4.8 (46 reviews)
5.6
5.6
User Avatar
hello. I am Ronald Ayco, 6 years of experienced as a professional licensed Civil Engineer. I am willing to impart my knowledge and skill in your project. I am currently working here in Philippines, Governtment agency, Engineering Department in the field of planning and designing Buildings and water system. Thank you!
$222 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I was looking for similar kind of work . I would be greatful if you gave chance to work with you. I knew you will not regret working with me .
$277 USD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
United States
0.0
0
Payment method verified
Member since Jan 27, 2017

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.