Arduino Programming code and layout

In Progress Posted Jan 31, 2015 Paid on delivery
In Progress Paid on delivery

I need a programmer to make my project work using arduino. attached is the circuits that i had and the operation steps will be further described below.

Operation Steps is described as below :

1) Switch on the main power switch and the ultrasonic sensor will perform an initial distance measurement on the Y-axis (e.g. initial distance of 30cm height is taken as reference point). It will feedback to the micro controller. (The initial distance always varies for each usage so it must perform the initial distance measurement prior to each usage.)

2) The micro controller will activate the stepper motor to move the prototype only 4cm on the Y-axis (e.g. it will stop at the height of 26cm and go back to the reference distance initially measured at 30cm.)

3) Repeat moving from reference point to height of 26cm for 30second.

4) After 30 second at the reference point, Pause for pulse taking, If no pulse detected, continue moving from reference point to height of 26cm for 10 second while LED is light up.

5) 10 second later, pause again at reference point, LED switch off.

6) Immediately pause for pulse taking, if no pulse detected, repeat step 4 and 5.

7) If pulse is detected, all operation stop and pulse sensor will monitor the pulse.

8) Lastly, if no pulse is detected again, repeat step 4 to 7.

9) A emergency stop button to stop all operation.

(In between of each step, there will be a voice instruction and display output from the wave shield and LCD Screen)

Arduino C Programming PCB Layout Software Architecture Software Testing

Project ID: #7062187

About the project

15 proposals Remote project Active Feb 3, 2015

Awarded to:

abdagli

It is easy job for me, so my bid is low and we can work later together on different arduino projects.

$100 USD in 3 days
(7 Reviews)
2.9

15 freelancers are bidding on average $261 for this job

mechatronicsengr

I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I More

$155 USD in 25 days
(87 Reviews)
6.8
shahbaz1980

Hi There, We will built the circuit, program the arduino and show you the working of whole project on skype. Once you are OK with performance we will deliver the design. Following shall be the deliverable. furtherm More

$483 USD in 15 days
(36 Reviews)
6.8
maxbul

Hello Task is very interesting for me. I work in IT and electronics more than 15 years (last 10 years - mainly as a programmer). Graduated in electronics. More than 6 years work with microcontrollers. On Ardui More

$245 USD in 20 days
(88 Reviews)
5.8
EagleSha

Over 12 years of experience in electronics hardware and software design. Proficient in software and hardware design of embedded systems. Successful in planning and management of entire development and production cycl More

$850 USD in 20 days
(33 Reviews)
5.6
Frayaminer

Предложение еще не подано

$155 USD in 3 days
(2 Reviews)
5.1
ElectroStrom

i am an electronics engineer with 4 years of experience. i have experience with arduino and can do this job. please contact me to discuss details

$100 USD in 7 days
(9 Reviews)
4.3
florinconstantin

ACTUAL BIDDER! NOT A SUBCONTRACTOR!!! Hello, i have a PhD in Mechatronics and ample experience with Arduino boards, as well as microcontrollers. I have most of the hardware needed to get this started and have worke More

$222 USD in 3 days
(8 Reviews)
4.3
sharpsense

Interesting Project, Dear Sir, I have vast experience in arduino programming and development sensor based electronic systems. I have worked with UNO,MEGA, MINI and also have developed arduino compatible controller b More

$244 USD in 3 days
(2 Reviews)
4.0
anatolyzimin

Hello! I have a wide experience in arduino programming. I'm already worked with ultarsonic sensor, motors, and TFT. Feel free for any questions. Thanks!

$160 USD in 5 days
(21 Reviews)
5.9
phanhuycuong812

A proposal has not yet been provided

$155 USD in 7 days
(0 Reviews)
0.0
mihaipop03

A proposal has not yet been provided

$111 USD in 7 days
(0 Reviews)
0.0
glad4enkonm

I have corresponding degree from university and work experience with similar projects. The work will be done with required quality level.

$155 USD in 3 days
(0 Reviews)
0.0