Adjust current IOS configuration of cisco as5400 to allow gateway to accept incoming PPP dialup 56k
The attached configuration is currently accepting only SIP calls.
I need a modification of the current config so that any call received from a specific DID 800-555-1212 will be answered as a 56k modem.
The gateway must continue to reroute the other calls to the sip server
The hardware used is:
Cisco AS5400HPX (R7K) processor (revision T) with 262144K/65536K bytes of memory.
Backplane HW Revision 1.0, Flash Type 3.3V
2 FastEthernet interfaces
198 Serial interfaces
216 terminal lines
8 Channelized T1/PRI ports
512K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)