Wireless charging circuit design jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,000 wireless charging circuit design jobs found, pricing in USD

    The brand will be Peacock Renewables so we obviously want to incorporate the feathered effect on the logo but it needs to look modern and eye catching. We sell Solar Panels and EV charging points.

    $96 (Avg Bid)
    $96 Avg Bid
    90 bids

    3- Project Outputs: a- The data will be saved to the computer in CSV file format. Each line in the file; time and the actual value (voltage or current) of the data read. b- A real-time graph will be drawn showing the time-dependent variation of the readings. c- Th...file format. Each line in the file; time and the actual value (voltage or current) of the data read. b- A real-time graph will be drawn showing the time-dependent variation of the readings. c- The reading program will be saved as a separate program on the computer (it will not be run with the software of Arduino or similar hardware interfaces). Codes will be sent as installation file. d- If circuit preparation is required for the project, PCB and necessary connectors will be developed, printed and integrated into t...

    $138 (Avg Bid)
    $138 Avg Bid
    17 bids

    Look for me as a writer of summaries, proofreader of theses, monographs, texts, articles and everything you want me to write for you, with pleasure. I am new and therefore I am charging low price to help each other. immediate availability

    $71 (Avg Bid)
    $71 Avg Bid
    45 bids

    ...simulate the circuit in Ansoft Designer and verify that there are no reflections on transmission line l3. The lengths of the line sections have the values l1 = 2.5cm, l2 = 1.25cm, and the characteristic impedances are. It is known that the circuit is working at the frequency f=3"GHz." Determine the value of the load impedance ZL, knowing that the line is terminated on a matched load. The project requires expertise in microwaves and transmission lines. Requirements: - Experience with Ansoft Designer - Knowledge of microwaves and transmission lines - Ability to work with ideal, lossless transmission lines Deliverables: - Simulation of the circuit in Ansoft Designer - Verification that there are no reflections on transmission line l3 Please note th...

    $24 (Avg Bid)
    $24 Avg Bid
    7 bids

    I am in need of an HFSS U Slot Patch Antenna Design for my wireless communication project. The antenna should operate within the frequency range of 2-4 GHz. I have specific dimensions that must be met for the design. The ideal candidate for this project must have experience in antenna design and be proficient in HFSS software. Also must prepare a technical report with given template. The project requires the following skills and experience: - Expertise in antenna design and HFSS software -Can write a technical report about antenna with given template - Ability to work within specific size constraints - Knowledge of electromagnetic wave theory and antenna radiation patterns - Familiarity with antenna testing and measurement techniques.

    $72 (Avg Bid)
    $72 Avg Bid
    16 bids

    I am looking for an Indian freelancer who can help me make a simple PCB based upon the given picture. I have already designed the schematic for the PCB and have my components selected. However, I need someone who can help me convert it to an actual PCB Here's what you need to do : - I wil...upon the given picture. I have already designed the schematic for the PCB and have my components selected. However, I need someone who can help me convert it to an actual PCB Here's what you need to do : - I will send you the components - You need to solder the components on a vero board based on the given schematic - In total, there are a maximum of only 4 components - Make a report of the circuit based on my instruction - Ship it out to the given location Indian freelancer...

    $14 (Avg Bid)
    $14 Avg Bid
    15 bids

    I am looking for an expert freelancer who can assist me with troubleshooting wireless networks. My project requires someone who has a deep understanding of wireless networking technologies, and can provide solutions to any issues that may arise. The ideal candidate should have the following skills and experience: - Expert-level knowledge of wireless networking technologies - Experience troubleshooting wireless networks - Understanding of network protocols and security measures - Ability to communicate technical information to non-technical stakeholders - Familiarity with network monitoring tools and software If you have a proven track record of troubleshooting wireless network issues, and possess the necessary skills and experience, please apply for thi...

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    13 bids

    Hey Metin. How are you? My name is Thomas and I currently need some help on hardware circuit design. I am wondering if you provide service related to circuitry design?Thank you very much and I look forward to hearing from you!! Sincerely, Thomas

    $257 (Avg Bid)
    $257 Avg Bid
    1 bids

    Hello I have an Arduino Circuit I need someone to do a peer review verify it is fine, Details would be given to chosen vendor.

    $14 (Avg Bid)
    $14 Avg Bid
    17 bids

    We need an Ev(Electric Vehicle) Android/iOS app which shows the nearby charging stations with the help of geolocation tracking. It has all charger list with its information. Along with the charging stations a rewards sections is also to be added.

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    31 bids

    I am seeking a skilled electronics geek who can design a circuit schematic for my prototype development project. The intended use of the electronics is for a prototype. Hello Coders and Self Confessed Electronics Geeks! I need someone to help me design and then also make a working prototype PCB product using electronics. - You must know how to design and make a quality PCB. - Help generate parts list and assemble the PCB. - Must know how to assemble electronics. - Must know Arduino and its capabilities. I want to make a wireless Water level detector that is submerged in salt water. It checks water level every 30 mins, send signal wirelessly to reciever. If water low, it open a 12 volt solenoid #1 for 15 minutes. If water level too high is it open...

    $174 (Avg Bid)
    $174 Avg Bid
    30 bids

    My name is Steven from Electrical company and I am looking for a freelancer to help create content for my electrical components business. We specialize in providing high-quality circuit breakers, switches, connectors and power relays. I’m looking for a freelancer who can provide content for the products, in a variety of forms including product descriptions, technical specifications and comparison charts. 2D & 3D drawing formats such as pdf, stp and jpg are also a requirement. I have existing materials and references that can be used for the content creation, in total 22 sets of Power Relay (11 sets size in similar) will need to do. In terms of delivery, I will expect quick turnaround times on the content, dependent on the freelance's availability. Quality of the conte...

    $100 (Avg Bid)
    $100 Avg Bid
    26 bids

    ...startup company specializing in Wireless Internet Service Provision (WISP). As a Network Engineer, you will be responsible for designing, implementing, and maintaining the network infrastructure of our WISP. This includes network architecture, equipment selection, and providing ongoing support to ensure optimal performance. Responsibilities: - Designing and implementing network infrastructure for our WISP. - Selecting and configuring networking equipment. - Monitoring network performance and troubleshooting issues. - Providing ongoing support and consultation. Qualifications: - Bachelor's degree in Computer Science or related field. - Proven experience as a Network Engineer. - Strong knowledge of networking concepts and protocols. - Familiarity with wireless network...

    $370 (Avg Bid)
    $370 Avg Bid
    23 bids

    Project is D&C. We will provide shop drawings, circuit arrangement, cable schedules and loading for review/comment. We will require a 1507 certificate issued upon approval. *the attached drawings are not a complete set but an example.

    $35 / hr (Avg Bid)
    $35 / hr Avg Bid
    16 bids

    ...website should provide an intuitive interface for users to design CMOS circuits, specify input signals, run simulations, and visualize the output waveforms. Key Features and Requirements: Circuit Design Interface: Develop a user-friendly interface where users can design CMOS circuits by selecting and placing components such as transistors, resistors, capacitors, and interconnections. The interface should support drag-and-drop functionality and provide various component options.(not mandatory) Simulation Engine: Implement a robust simulation engine that accurately models CMOS circuit behavior based on user-designed circuits. The engine should support transient analysis, DC analysis, and AC analysis, allowing users to analyze circuit performanc...

    $106 (Avg Bid)
    $106 Avg Bid
    8 bids

    I am looking for a skilled 3D artist who can create realistic 3D images and animation sequences for my website. The ideal candida...(e) the background "buildings" are 2 and 3 story residence, 3 story apartment, commercial building (i.e. warehouses, factories, retail shop/building, etc. (f) the animation must demonstrate the delivery of solar panels and roofing materials on to rooftops. (g) The electric winch has 2x controllers. A 10m wired controller that is attached to the winch, and operated from the ground; and a 100m wireless controller than can be operated from the rooftop / remotely. Skills required: - 3D modeling and animation - Proficiency in 3D software such as Maya or Blender - Attention to detail and ability to create realistic textures and lighting - Strong ...

    $142 (Avg Bid)
    $142 Avg Bid
    50 bids

    I am looking for an experienced electrical engineer who specializes in electronics to h...engineer who specializes in electronics to help me develop a hardware project. The project will focus on hardware development and will require the use of Arduino as the preferred platform. The ideal candidate should have experience in the following areas: - Hardware development using Arduino - Schematic and PCB design - Circuit analysis and simulation - Debugging and testing The main objective of the project is to design a circuit that will be used for a specific application. The circuit will require the use of various electronic components such as microcontrollers, sensors, and actuators. The candidate should be able to work independently and be able to complete t...

    $91 (Avg Bid)
    $91 Avg Bid
    15 bids

    We are a small church in Spring, TX. We are needing a sound engineer to tweak our audio console (Allen and Heath QU-24). We are using shure wireless mics as well...

    $30 / hr (Avg Bid)
    Local
    $30 / hr Avg Bid
    7 bids

    We are a manufacturer of 12v and 12/24v jump starters. We rent and sell to the automotive industry. We are in need of someone who can develop a reverse polarity protection circuit for our jumpstarters. The circuit would have to stop the current from flowing thru to the vehicle being started if the cables happened to be hooked up wrong. Is this something that your company can do?

    $483 (Avg Bid)
    Urgent NDA
    $483 Avg Bid
    8 bids

    Mobile app is about EV charging stations. Customers will look stations near by via app. They will make reservations. They will be pay the amount. I have already sketch plan but it will be improve and look professional.

    $193 (Avg Bid)
    $193 Avg Bid
    48 bids

    I'm looking for an experienced engineer to help me optimize a mixed-signal circuit in order to increase processing speed. The project will require advanced expertise, as it needs to be completed to a high standard, ensuring reliability and stability. I'm looking for someone who is knowledgeable in analog and digital circuit, as the project involves integrating the two. Experience in circuit optimization is also essential, as this project involves complex analysis and detail work. Ultimately, I'm looking for a engineer who can make sure this circuit operates as desired - quickly and reliably.

    $644 (Avg Bid)
    $644 Avg Bid
    11 bids

    I'm looking for an experienced engineer to help me develop a project involving Arduino. My project will involve controlling DC motors wirelessly between an Arduino Nano and an Arduino Mega using the NRF protocol. The range of the wireless communication must be up to 50 meters. The ideal candidate should have in-depth knowledge of Arduino C++ code, and experience with developing wireless solutions. Experience programming servo motors or stepper motors is also preferable. If you think you have the right qualifications for this exciting project, let me know and let's get started building this ambitious solution.

    $616 (Avg Bid)
    $616 Avg Bid
    33 bids

    Custom Dog Pedigree Banner Template Design Needed I am looking for a designer to create a custom banner template for my dog pedigree business. The banner needs to be in medium size, specifically 11x14 inches. I prefer an illustrative design style that showcases the breed of the dog. I want the banner to be eye-catching and must be editable so I can change names and photos for each dogs specific details. Also the idea I want the banner to have a high tech look of a chip or circuit board Skills and Experience Needed: - Expertise in Adobe Photoshop or Illustrator - Experience in creating custom banner designs - Knowledge of dog breeds and their characteristics - Ability to create an illustrative design style File Format: I require the banner to be i...

    $92 (Avg Bid)
    $92
    16 entries

    I need electrical diagrams completed to UL508a standards for a small machine. See attached PLC circuit diagram.

    $425 (Avg Bid)
    $425 Avg Bid
    40 bids

    I am seeking an experienced developer to assist me in the finalization of the design for my medical product, which is intended for treatment purposes. The ideal candidate should have expertise in working with microcontrollers for embedded systems. Key requirements for the project include: - Finalizing the design of the medical product - Developing the embedded system using a microcontroller - Ensuring the product is user-friendly and easy to operate - Conducting rigorous testing to ensure the product meets all safety and quality standards - Providing ongoing support and maintenance for the product post-launch The successful candidate should have: - Extensive experience in developing embedded systems using microcontrollers - A deep understanding of the medical product deve...

    $1439 (Avg Bid)
    $1439 Avg Bid
    10 bids

    Circuit Design using Multisim and results in word document.

    $180 (Avg Bid)
    $180 Avg Bid
    1 bids

    Voltage sensing ground switch. Switching at 6VDC and 9VDC. Purpose. I have a sound card that operates between 6VDC and 24V DC and between 1 and 2 amps DC. It has 3 sounds installed. I would like at 0V for one sound to play. At 6V it switches to another sound. At 9V it switches to another sound. So each sound plays indivi...at 0V for one sound to play. At 6V it switches to another sound. At 9V it switches to another sound. So each sound plays individually as the voltage increases. When the voltage drops down the sounds also roll back. The ground on the sound board triggers the sound changes. The board I use is DY-HV20T sound board. I would also appreciate if a sample was built and tested, and supplied to me with a circuit diagram. If I can answer any questions, please contact me. Man...

    $496 (Avg Bid)
    $496 Avg Bid
    30 bids

    Required part-time E-Commerce Application Developer, to upgrade, and maintain our Code-Igniter based E-Comm. application on a regular basis. This is Permanent +...based on candidates profile and Worthness. Hence , we prefer : i) Person residing in NCR, preferably in or around NOIDA/Ghaziabad/Delhi. ii) Person who can Personally visit Company's Office 2-3 days in a week. iii) Person who can work 3-4 hours per day on 3-4 days in a week, on regular basis. iv) Payment on Monthly basis, in Rs. only , in cash/Online. (Those working on overseas projects and charging in $ may Please excuse !) v) Experience 2-5 years. vi) Payment Amount: Apprx 500/- per session. If you are interested in working with us, please apply with your portfolio and experience in e-commerce application...

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    12 bids

    ...Management Software for our outdoor network with user authentication capabilities. The application should be able to access multi payment gateways like Mastercard and Mobile Money accounts. The estimated number of users for the network is more than 200. The ideal candidate should have experience in developing similar software for outdoor networks and should be proficient in the following areas: - Wireless networking protocols and technologies - User authentication techniques - Network security and encryption - Bandwidth management and optimization - Content filtering and access control The software should be user-friendly, scalable, and able to manage multiple locations. It should also have a dashboard for network monitoring and reporting. Please provide examples of previous wo...

    $575 (Avg Bid)
    $575 Avg Bid
    17 bids

    I am looking for someone to help me embed a logic circuit simulator on an html webpage. The simulator I am looking to use is the one found at I am open to suggestions when it comes to functionality but I am also looking for someone who can come up with a design for the webpage that is visually appealing and functional. No specific design requirements have been given yet but I am open to suggestions. If you have experience working with logic circuit simulators and html webpages and think that you can help me, please reach out.

    $26 (Avg Bid)
    $26 Avg Bid
    9 bids

    I am looking for a skilled freelancer to embed a Logic Gate Simulator on my ReactJS website. The ideal candidate should have experience with circuit simulation and ReactJS development. The project requires the following: - Embedding this simulator: ReactJS website - Implementation of custom components for the simulator (if possible) Optional features include: - Save and load functionality Please submit your proposals with relevant experience and portfolio. Thank you.

    $18 (Avg Bid)
    $18 Avg Bid
    9 bids

    ...requirements: - CMOS or CCD sensor - LED wavelength of 600nm or about, - Triangular prism Specs: Minimum of 0 - 20 degree brix precision ±0.1%; resolution 0.05% Output Method: Digital One option would be TCD 1106GFG or DFT sensor but we are open to other options Ideal Skills and Experience: - Experience in CCD, CMOS, sensors - Knowledge of digital output methods - Proficient in programming and circuit design - Familiarity with calibration techniques The finished product should be a reliable and accurate Brix sensor assembly that could be easily incorporated to a multiparameter PCB digital output. Calibration methods should be included to ensure accurate measurements....

    $145 (Avg Bid)
    $145 Avg Bid
    13 bids

    I am looking for a skilled electrical engineer to write a scientific paper on Wireless Communication. The paper should be 5 pages long and be written at an advanced technical level. There are no preferred research methodologies or approaches, so the writer is free to choose what they believe will work best. The ideal candidate should have experience in wireless communication and be able to provide technical details that meet the advanced level requirement. The paper should be well-researched, well-written, and delivered in a timely manner.

    $36 (Avg Bid)
    $36 Avg Bid
    41 bids

    I am in need of professional electronic circuit design services to create a medium-sized (4-8 inches) PCB with signal processing functionality. I have prepared a comprehensive list of components that need to be included in the design, so I am looking for someone who can create a reliable, top-quality layout to fit my needs. I am okay with the end result being a Geber Files for me to print. PCB must house a Texus Insturments DS90UH949 chip to communitate with a Texus Insturments DS90UH948 using FPD-Link III via a 6 channel HSD coaxial cable.

    $102 (Avg Bid)
    $102 Avg Bid
    16 bids

    I am looking for a freelancer who can design a small wireless network using packet tracer for educational purposes. The network topology preferred is star, and we will need to connect between 10-20 devices. The ideal candidate should have experience designing networks using packet tracer and implementing star topology.

    $30 (Avg Bid)
    $30 Avg Bid
    6 bids

    Hi I want to setup the witeless bridge of the router for my home. The main router is Huawei and the second one is Netcomm. Please let me know the cost of your setvixe. Thanks.

    $8 (Avg Bid)
    $8 Avg Bid
    9 bids

    I'm in need of a Data Center Cisco Network expert to set up, configure and troubleshoot a Small Data Center Network consisting of Cisco routers and switches. The scope of the project includes installing, configuring and optimizing the network. The network size is less than 50 devices and may require further expansion or upgrades in the near future. The id...optimizing the network. The network size is less than 50 devices and may require further expansion or upgrades in the near future. The ideal candidate should have a solid understanding of routing, switching and various forwarding concepts as they apply to Cisco solutions and should have significant experience with related Cisco devices, technologies and services. Experience with security solutions and wireless networks is ...

    $2467 (Avg Bid)
    $2467 Avg Bid
    18 bids

    I have a product called the MicroMaster. It is a small circuit board about the size of a deck of cards, used to troubleshoot and hack into electronic devices. I need someone who can edit my videos (I will provide the raw videos, you just have to edit them), and consult on ways to improve its visibility on YouTube and social media. I have a website which is still a work in progress. The video editing I need is rather simple. Basically, all I need is someone to edit my videos to show what I am demonstrating, which will require displaying a computer screen and the demonstration at the same time. I am looking for someone who is enthusiastic and speaks English fluently (an initial video interview will be required). It is more important that you have a good understanding of electronics

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    34 bids

    I am looking for a freelancer to help with a Machine Learning (ML) project using Python. The objective of the project is to use ML algorithm using regression techniques to optimise an analog circuit. I need to generate dataset to use for the project, and so this includes finding the appropriate methods to process the data and then apply the regression project requires knowledge of ML techniques and Python for dealing with regression problems. If you have the skills and experience to complete this project, please reach out.

    $101 (Avg Bid)
    $101 Avg Bid
    22 bids

    ...Commercial Application I am looking for a freelancer who can help me with the conceptual design of a mechanical electric storage system based on pressurized air and should be suitable for commercial use. Ideal Skills and Experience: - Experience in designing mechanical electric storage systems - Knowledge of pressurized air technology - Familiarity with commercial applications of energy storage systems The project is in the conceptual design stage, and I need someone who can provide me with a detailed design plan for the storage system. The system should be designed to store energy efficiently and at a low cost. Parts of the System: Solar Panels Air Intake Moisture Filter Carbon Dioxide Filter Closed Circuit Wind Tunnel Pressurized Air Storage Unit Heat...

    $1085 (Avg Bid)
    $1085 Avg Bid
    38 bids

    i need help filling an appeals case from the second circuit court to the united states supreme involving the fraudulent concealment statute. I need this in the form it would be presented to the supreme court.

    $488 (Avg Bid)
    $488 Avg Bid
    13 bids

    ...success you had. 3. Provide a brief proposal on: 1. What keywords you think we should target. This will require some research on Odoo (see ) and also competitors. For UK competitors see 2. List of companies that are running similar campaigns. 3. Monthly budget required to successfully run the campaign. 4. What your charging model is and whether you would consider a commission-based structure I am not looking for an exhaustive campaign strategy but I need the confidence that you have the experience to be able to successfully execute the campaign....

    $97 (Avg Bid)
    $97 Avg Bid
    65 bids

    I am looking for an experienced freelancer to design an antenna for me using CST microwave suite. The antenna should have the following specifications: Frequency Range: Above 5 GHz Antenna Type: Patch Antenna Application: Wireless Communications The ideal candidate for the job should have the following skills and experience: - Expertise in designing antennas using CST microwave suite - Knowledge of patch antenna design - Experience in designing antennas for wireless communications If you have the required skills and experience, please submit your proposal with a brief overview of your experience in antenna design.

    $270 (Avg Bid)
    $270 Avg Bid
    17 bids

    ...simulation for a combinational circuit. I have a specific logic function in mind and I expect the output of the circuit to be represented in a truth table. The ideal candidate should have experience in Logisim and be able to work efficiently to deliver a high-quality simulation. Additionally, knowledge of Boolean algebra and logical gates is required to successfully complete this project. The following is an overview of the project: Security systems are commonly used in home and business environments. These systems comprise of the physical hardware, such as sensors and alarms, software to determine responses to alarms, and contractual components, for example insurance and service plans. In this assessment, you will develop a security system simulation as a Logisim ...

    $16 (Avg Bid)
    $16 Avg Bid
    5 bids

    I am looking for a skilled C++ developer who can create a code for an EV charging system. The code should be compatible with the Windows operating system. The project requires someone who can work on specific requirements, as I have provided a detailed list. The desired functionality of the charging system will depend on the files I provide. Therefore, flexibility and adaptability are essential. Ideal skills and experience for this job include: - Proficiency in C++ programming language - Experience in developing software for Windows operating systems - Strong problem-solving skills and attention to detail If you have the skills and experience required for this project, please apply with your portfolio and relevant experience.

    $535 (Avg Bid)
    $535 Avg Bid
    20 bids

    ESP32 motor control circuit. Adjustable Amp rating, over current protection, Hand off Auto switch, Safety interlocks ( Dry contact) LCD display

    $1738 (Avg Bid)
    NDA
    $1738 Avg Bid
    10 bids

    ...looking for a hardware designer who can design a low-cost SMPS power supply for my industrial equipment. The power supply should have an output voltage of DC 5V and 10A, 12V and 10A, dual output5v, 12v and 10A DC. . The input voltage range should support both 110-120VAC and 220-240VAC. The ideal candidate should have experience in designing SMPS power supplies and be knowledgeable in the following areas: - Power electronics - Analog and digital circuit design - Switch Mode Power Supplies (SMPS) design - PCB layout design - Power supply testing and verification The scope including these 3 products electrical hardware schematic design, components sizing calculations like transformer and inductors, pcb design, bom list readiness, metal Ca...

    $82 (Avg Bid)
    $82 Avg Bid
    12 bids

    ... I like the feel of the new style (but have no particular attachment to orange) The collaboration logos are here: including some patches and stickers made for the current data taking period - Run 3. Also, ATLAS_logo_colour_square.jpg. The globe imagery is used a lot. I am attaching a few other images: = this is a rendering of the new detector EF_Logo_cut = is one the logo of one of the communities. They find tracks using very quickly and use custom hardware. The colored lines point back to the old school event display and the blue lines with the circles are supposed to remind one of a circuit board. The other community that part of the mix, looks for tracks but has more time so use regular CPUs. They don't have a logo but often put images

    $68 (Avg Bid)
    $68 Avg Bid
    32 bids

    Our company is looking for a freelancer to design a full-page magazine ad for our unique carvings from Nunavut. Our main goal is to promote sales and expand awareness of our brand. The target audience for the ad is the general public, as we have items that are not art, but also art collectors and tourists who appreciate unique and indigenous crafts. The ad should be a full-page spread, and we are looking for a designer with experience in creating eye-catching and visually appealing print advertisements. Ideal skills for this job include graphic design, marketing, and experience in the arts and crafts industry. We are excited to see what creative ideas you can come up with to showcase our wide range of products and attract new customers. Please include the fact that we carry a...

    $56 (Avg Bid)
    Guaranteed
    $56
    43 entries