Stm32 usb oscilloscope project jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,894 stm32 usb oscilloscope project jobs found, pricing in USD

    Just one function Transfer file (e.g. .png or .jpg) to Android SD card via OTG use, this OTG will connect to GPIO of Raspberry Pi to Android device connector via USB OTG. Raspberry Pi will run by Debian system or Ubuntu. It will trigger by one physical button which connected to GPIO. Once GPIO level is high, procedure will be started to transmit files

    $146 (Avg Bid)
    $146 Avg Bid
    6 bids

    ...connected to the custom device with its own USB cable. Custom device will receive that input and modify the input. The modified input will change it so if the left mouse click is pressed and held, it will continiously click at a set speed in the code. Custom device will then get that changed output following with a USB and it will be connected to the PC.

    $211 (Avg Bid)
    $211 Avg Bid
    6 bids

    STM32 Simple AT Commands Sender / Response parser over UART Simple library that will send AT Command to the modem over UART and process the response from the modem. One Function that will send the supplied AT Command and process the response from the modem.

    $51 (Avg Bid)
    $51 Avg Bid
    6 bids

    I need to link receipt printing of Odoo's POS to an USB Serial ESC command receipt printer on Android, the documentation of the printer has attached below, the SDK (.jar file) will be provided.

    $70 (Avg Bid)
    $70 Avg Bid
    1 bids

    Need C# expert who has experience in data hooking. I want to capture print data which is sent to printer through LPT port or USB. UI is not important, You can show capture data in simple form. I want logic code mainly. if you're confident in this field, please bid for me. My budget is 50$. You must write "Capture" tag at a head of your bid message.

    $110 (Avg Bid)
    $110 Avg Bid
    6 bids

    Need C# expert who has experience in data hooking. I want to capture print data which is sent to printer through LPT port or USB. UI is not important, You can show capture data in simple form. I want logic code mainly. if you're confident in this field, please bid for me. My budget is 50$. You must write "Hook" tag at a head of your bid message.

    $178 (Avg Bid)
    $178 Avg Bid
    11 bids

    We need a project that reads USB printer information using PJL commands, @PJL INFO PRODINFO and @PJL INFO PAGECOUNT. The application will only read on USB printers only! No readings will be made on the network printer! The code should be done in Visual Studio so that our programmers can enter the code in our project.

    $532 (Avg Bid)
    $532 Avg Bid
    5 bids
    Trophy icon Logo for a usb cable company 8 days left

    I need a 3d logo for a company that seel USB-c cables, it must have a monkey and something that is similar to USB cable. I need a black background and something innovative a project. the name of the website is [login to view URL]

    $180 (Avg Bid)
    Guaranteed Sealed
    $180
    72 entries

    We need a persion who can set up a fax servi...text) We don’t need you to develop this, just need to install and configure a existing software. We try to configure hylafax but could not get it to work. Here is the external USB fax modem we are using: https://www.amazon.com/gp/product/B0013FDLM0/ref=ppx_yo_dt_b_asin_title_o09__o00_s00?ie=UTF8&psc=1

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    3 bids

    I have received the components and the PCB. I will assemble the different parts of the circuit and test their devices with very simple programs. Flashing test Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. Write the final program. I wi...

    $42 (Avg Bid)
    $42 Avg Bid
    9 bids

    I want to get a tilt of stm32f411 board and send it through usb. Program needs to be created in CubeMx and open stm32 (system workbench).

    $86 (Avg Bid)
    $86 Avg Bid
    10 bids

    I have a HID based USB caller id device which i want to use to get caller id on my pstn and inject the callers number and date and time in mysql database . If you can do that please bid this will be only on centos7 linux environment and it needs to run 24/7 on the server if it fails anytime it needs to try and reconnect or send failur email to admin/root

    $135 (Avg Bid)
    $135 Avg Bid
    6 bids

    Hi, I am electrical engineering graduate student. I am working on a college project. I am here to get a hardware developed for the final project of the product development class. Project Requirements: 1. A small hardware within the board size of 4cm x 4cm 2. ATMEL microprocessor with additional memory (Not the must, but best to have something

    $483 (Avg Bid)
    $483 Avg Bid
    13 bids

    Hello, I am looking for someone who...someone who can buid a SIMPLE bash script, the script must be able to encrypt a USB partition (all the partition) and decrypt with a PGP key. I must be able to launch like this : ./[login to view URL] --uuid (usb key) --pgpkey --encrypt/decrypt if the pgpkey is good the mount usb key and decrypt if pgpkey then error message

    $29 (Avg Bid)
    $29 Avg Bid
    6 bids

    I need to set up a timer to start ADC conversions...register programming also acceptable. I would like an ADC interrupt too at the end of every conversion, which toggles the D0 pin on the board, so that I can check with an oscilloscope when conversions are taking place at the correct rate. The DMA should provide interrupts for each half buffer full.

    $202 (Avg Bid)
    $202 Avg Bid
    16 bids

    ...peripherals between the task execution - probably will be woken up by internal RTC. I need a highly professional and clean code with an upmost focus on power efficiency. The project must be in Keil or VisualGDB Solution and not over 100 USD. I need a person that will contact me quickly and deliver first examples in shortest amount of time. Thanks.

    $164 (Avg Bid)
    $164 Avg Bid
    8 bids

    We have a STM32 project that was developed with Ride7 IDE for ARM. Freelancer must open and build project with Atollic for STM32. Project is in zip file at [login to view URL] Files and folders must not be changed. Freelancer must be experienced with Atollic. A demo version of Ride7 for ARM can be downloaded

    $148 (Avg Bid)
    NDA
    $148 Avg Bid
    4 bids

    I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will rep...

    $25 (Avg Bid)
    $25 Avg Bid
    2 bids

    I want to make a PCB design with stm32 sx1276 lis3mdl support by battery

    $98 (Avg Bid)
    $98 Avg Bid
    19 bids

    ...setup a Rpi3 with a USB webcam(Not RPiCam) in her studio, that would allow her to record audio/video her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras, that do not work with USB cameras, included

    $163 (Avg Bid)
    $163 Avg Bid
    9 bids

    Necessito de uma powerbank com as seguintes especificações: - Capacidade: entre 2000 e 3000 mAh - Input: USB-C (e se possível com wireless charging) - Output: USB-C e wireless charging - Dimensões: até 9*5.5*0.5 cm

    $2715 (Avg Bid)
    $2715 Avg Bid
    19 bids

    I have a Usb Floppy drive and want it to replicate a tone/song imputed to a program [login to view URL]

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    I am looking for an Embedded C programmer for STM32 microcontroller. - Processor is ARM Cortex M4. - Project is to control and drive a Very High Current BLDC motor. - Software development in Keil MDK platform. Budget is less! So expecting suitable bid!

    $176 (Avg Bid)
    $176 Avg Bid
    19 bids

    Hello, i have tinkerboard ...have tinkerboard computer running ARMBIAN OS. i use rdesktop to access my win10 virtual machine on local hypervisor server in local network. i want to connect smartcard and usb device to ARMBIAN and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    $122 (Avg Bid)
    $122 Avg Bid
    7 bids

    SENARIO: I have a quantity of 40 USB thumb drives. I want to divide them into four groups, A, B C, and D. When I plug ANY of the thumb drives in from group A into ANY of the USB ports on the Pi, I’d like it to play video: /Home/Pi/[login to view URL], when I plug ANY of the thumb drives in from group B, I’d like it to play video /Home/Pi/[login to view URL], when I plug...

    $20 (Avg Bid)
    $20 Avg Bid
    2 bids

    Hi I would like to engage your services to put Digital filters on STM32 using Mathlab - I don't know if this will work or what is needed to make this happen, so this will be a project from scrtatch. The first part will be research to get the requirements document, the 2nd will be proposaed parts and solution, 3rd part will be building the prototype

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    Rubix Technologies offers you a wealth of expertise in the proc...automation. A start-up for 3 years now, we are into custom OEM solutions in Embedded. Major field of work in communication and IoT. Require a freelancer(full time) for one such project in which candidate should have experience in FFT Coding on STM controller using FREE RTOS and CubeMX.

    $507 (Avg Bid)
    $507 Avg Bid
    10 bids

    ...for you PCB designers who are up tonight. There is a PCB design already done in Altium Designer that contains a USB-C connector in it. This was a TE Connectivity USB connector. All we need you to do is to swap this connector with a Molex USB-C connector, the Datasheet of which will be supplied. All it takes is running Altium and about half an hour to

    $24 (Avg Bid)
    $24 Avg Bid
    32 bids

    My wife is currently using her phon...recording I would like to setup a Rpi3 with a USB webcam in her studio, that would allow her to record her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras.

    $244 (Avg Bid)
    $244 Avg Bid
    10 bids

    Hello Designers I'd like to have my USB stick and a DVD designed. Just need 2 cliparts. Need to be simple

    $21 (Avg Bid)
    $21 Avg Bid
    8 bids

    We want to use usb ports remotely We want a server - client architecture. Server will be a rpi-like device with an usb port. Client will run on windows10 and windows7. Server and client are accessible through LAN. Server and client software should be controlled via API. Main goal of the project is when any usb device is physically attached to pi,

    $163 (Avg Bid)
    $163 Avg Bid
    2 bids

    STM has provided its software libraries in compiled as well as in source code form. I need its motor control library. I am looking for someone who can search that for me.

    $26 (Avg Bid)
    $26 Avg Bid
    5 bids

    I need to mirror iPhone screen on any Android device using USB cable Cable. We cannot install the iTunes on the Android device, so the solution might handle this issue it self.

    $413 (Avg Bid)
    $413 Avg Bid
    8 bids

    We have a sbc box (server) running armbian with usb ports. There is a remote user (client) running windows 10. Client and server are on the same LAN. When we attach an usb device into box, we want it to behave like it is plugged into clients computer. We want a software similar to Virtualhere project.

    $575 (Avg Bid)
    $575 Avg Bid
    7 bids

    ...you are the best for this job, what experience you have with nuttx and STM32. I will then share (confidential) some further requirements and we can agree on fixed prices, for now, please quote your hourly rate. One of the requirements will be, for example, to fix issues with the usb driver and to move from a custom driver to a standard CDC driver provided

    $38 / hr (Avg Bid)
    $38 / hr Avg Bid
    22 bids

    Note: I am doing this project by my self so I do not need both parts done, I only need the light controlled motor. Please I need the following to be done: Introduction Photoresistor Theory and operation Operational Amplifier: Resistances and voltage divider Operation Complete Circuit diagram Simulation Conclusion Final Project: Light Controlled Motor

    $121 (Avg Bid)
    $121 Avg Bid
    4 bids

    Hello, i have tinkerboard computer running xubuntu 18.04 tls. i use rdesktop to access my win10 virtual machine on server in local network. i want to connect smartcard and usb device to xubuntu and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    $174 (Avg Bid)
    $174 Avg Bid
    6 bids

    ...old keyboard that was once sold in the us via monoprice and went out of production years ago. I love this keyboard for various reasons, Black cherry mx switches, usb passthrough, modular usb cable, but mainly because as far as i can tell it is the only keyboard in the world which is TKL and has macros (the roccat ryos pro tkl also does but they arent

    $135 (Avg Bid)
    $135 Avg Bid
    4 bids

    I have a project involving programming an STM32 board to control some ws2812b strips, an oled screen, a couple of sensors. You'll need to be creative and be able to write animations. Some animations will need be activated by sound frequencies from a mic and another lot by a shock sensor. I have a partially completed project. But you may need to rewrite

    $306 (Avg Bid)
    $306 Avg Bid
    7 bids

    Please see attached file to this project!

    $316 (Avg Bid)
    $316 Avg Bid
    19 bids

    The project is about developing an Arduino based AC motor control. In a previous project I have tried to use the Arduino to generate a PWM signal, that is later on filtered and amplified to generate a proper sine wave, that can be altered by frequency and amplitude to control a motor. Unfortunately with the current code it turned out, that the Arduino

    $204 (Avg Bid)
    $204 Avg Bid
    20 bids

    We need a line illustration created for this USB drive to show people how the usb opens. We would also like an arrow added showing how the tab with the chip flips up to open.

    $90 (Avg Bid)
    $90 Avg Bid
    33 bids

    We are building application where we need to connect to h...node js code. If you have very very good knowledge about node and node serial port then only reply with project. You will be working with remotely with team and hardware with team viewer so you can see how it works. When you apply for this project don't forget to mention " I LOVE NODE "

    $470 (Avg Bid)
    $470 Avg Bid
    11 bids

    ...provide calculations for critical parts of your design. A table listing all components and briefly noting how values were derived is required. An op-amp is be used in the project along with a TIP-31 transistor. The circuit MUST function. Good parts layout along with the use of bypass capacitors will greatly increase the likelihood that the circuit meets

    $116 (Avg Bid)
    $116 Avg Bid
    14 bids

    I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will rep...

    $60 (Avg Bid)
    $60 Avg Bid
    1 bids

    ...encoder solution that appears to be loosing encoder pulses during operation due to signal corruption. The initial project is to discover where in the signal pathway that is happening by monitoring a number of places using a multi-channel oscilloscope and then a high level programming language such as Labview to compare the signals. It would only be a a few

    $965 - $1930
    Local
    $965 - $1930
    0 bids

    hi I would like similar or same software that usb kyloggers use where I could load on to my own blank usb devices

    $68 (Avg Bid)
    $68 Avg Bid
    4 bids

    Have to build a sw stack on STM32 and ESP to communicate over WiFi or GSM depending on availability of the either interfaces and upload/download attributes from cloud. Appropriate actions has to be taken based on the command received.

    $462 (Avg Bid)
    $462 Avg Bid
    16 bids

    Hello, we...develop a small library to communicate with a USB HID device without requiring a rooted phone. The library should be accessible via QT/C++ and provide functions like: - open - listDevices - write (blocking and nonblocking) - read (blocking and nonblocking) - close We require the library and a simple test project. Target Android version 22

    $230 (Avg Bid)
    $230 Avg Bid
    8 bids