Python script file write telit jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    86 python script file write telit jobs found, pricing in USD

    Need someone experienced in python and programming telit modules to identify why a program is not working

    $222 (Avg Bid)
    $222 Avg Bid
    21 bids

    ...6-Configuration-of-Failover-and-Failback b. Provide option for user to Send SMS and Email alerts when failover or failback occurs. SIM Sensing 1. LTE Modem Support: Telit LE910-NA V2. Using the SIM IMSI, determine the wireless operator, auto insert the APN and use required firmware on the modem for cellular connectivity. This modem supports three

    $918 (Avg Bid)
    $918 Avg Bid
    14 bids

    ...rceLabs/meta-gateway At the moment we are using the OpenRex board for development purposes and would like to have the ability to add the following mini pcie cards: - Telit LE910-SVG - Sierra Wireless MC7455 - ability to add future cards easily I've only had a couple hours to look into this myself and have had issues reading the PCI cards

    $821 (Avg Bid)
    $821 Avg Bid
    6 bids

    We demand a embedded Program inside Telit xE910 Family inside with C-Program or Python 2.7.2 Languages. There is a configuration tool which ı prepared. so, the embedded software inside terminal will be configurated over this tool and will be run as plug&play. you can check configuration parameters at interface of tool from pictures.

    $794 (Avg Bid)
    $794 Avg Bid
    24 bids

    Need someone to write middle layer C/Python software which can handle communication between cellular modem at Physicallayer and User applications. The action types can be User app asking for internet connection or sending SMS. We are using Telit modems for Wireless connectivity. They have MCM Programming API which helps the communication.

    $246 (Avg Bid)
    $246 Avg Bid
    7 bids

    I need you to develop some software for me. I would like this software to be developed for Linux using Python. Telit Modem Software

    $191 (Avg Bid)
    $191 Avg Bid
    16 bids

    We are after an engineer that has had experience in writing embedded software for a single ethernet port modem gateway router using the Telit HE910 3G modem. The product MUST: Use Telit HE910 connected to the USB CDC interface(s) Ethernet port Must be RToS based (FreeRToS, MQX, uTasker etc), NOT LINUX Must be C code, written with exception handling

    $6338 (Avg Bid)
    $6338 Avg Bid
    3 bids

    I have an existing project that works OK. I use a Telit GL865 GSM module and can send an email with a JPEG attachment. My Python coding may not be the optimum but it seems to work OK. If I need to send to more than one address or send more than one picture I have to repeat the whole command and upload sequence which wastes time. The first problem is

    $240 (Avg Bid)
    $240 Avg Bid
    9 bids

    remote upgrade of software on telit module

    $1166 (Avg Bid)
    $1166 Avg Bid
    5 bids

    -Make a smart modem to read electricity which has IEC standart. -You should use TELIT GL865 DUAL V3 module -You should use mini usb port to set GPRS setting - You should write a smart firmware which can read all electricity value and save on it. -The modem should has RS232 and RS484 port - The modem should has LEDs -The modem should has one

    $833 (Avg Bid)
    $833 Avg Bid
    3 bids

    Read pulse (reed switch) You should use Telit GL865 dual v3 (version 3) You should use STM32L151RBT6 You should write c embedded program Ypu should draw a schematic in Altium Designer You should draw a PCB in Altium Designer You should use D size battery You should save the pulse data and send Server

    $479 (Avg Bid)
    $479 Avg Bid
    15 bids

    ...18F4620) üzerinde çalıştırılacak, GPS verilerini almak için AT komutları gönderilip alınan veriler parçalara ayrıldıktan sonra GPRS üzerinden hosta aktarılacaktır (tercihen Telit GE-864T-GPS ile). Projenin belirtilen kısmı tamamlandıktan sonra eklenmesi talep edilecek lokasyon değişikliği uyarılarını sms veya email ile gönderimini sağlayma ve web ...

    $342 (Avg Bid)
    $342 Avg Bid
    3 bids

    Develop an python smtplib wrapper class that would allow to seamlessly send MIME emails through serial port using Telit GL series gsm chip serial commuinaction.

    $235 (Avg Bid)
    $235 Avg Bid
    3 bids

    ...basic modem call something like this: RX 100mS 1400Hz TX DTMF TONES x 16 at 100mS on/off RX 750mS 2300Hz Notes: Currently we use a 16 bit uLaw PCM (DVI) bus from the Telit HE910 (could change to linear PCM if required). The design must be able to detect 1400Hz and 2300Hz audui tones down to 100mS precision. We must also be able to generate

    $3625 (Avg Bid)
    $3625 Avg Bid
    10 bids

    I need change IMEI modens wavecom, ublox, telit

    $575 (Avg Bid)
    $575 Avg Bid
    3 bids

    telit gsm/gprs modemden asp.net web servisine veri gönderme .

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    We need Excel docu...Parla Philips Plum Posh Prestigio QMobile Qtek Sagem Samsung Sendo Sewon Sharp Siemens Sonim Sony Sony Ericsson Spice T-Mobile Tel.Me. Telit Thuraya Toshiba Unnecto Vertu verykool vivo VK Mobile Vodafone Wiko WND XCute Xiaomi XOLO Yezz Yota YU ZTE infocus

    $27 (Avg Bid)
    $27 Avg Bid
    4 bids

    We need Excel docu...Parla Philips Plum Posh Prestigio QMobile Qtek Sagem Samsung Sendo Sewon Sharp Siemens Sonim Sony Sony Ericsson Spice T-Mobile Tel.Me. Telit Thuraya Toshiba Unnecto Vertu verykool vivo VK Mobile Vodafone Wiko WND XCute Xiaomi XOLO Yezz Yota YU ZTE infocus

    $14 (Avg Bid)
    $14 Avg Bid
    1 bids

    ...Plum Posh Prestigio QMobile Qtek Sagem Samsung Sendo Sewon Sharp Siemens Sonim Sony Sony Ericsson Spice T-Mobile Tel.Me. Telit Thuraya Toshiba Unnecto Vertu verykool vivo VK Mobile Vodafone Wiko WND XCute Xiaomi XOLO Yezz Yota YU ZTE infocus

    $23 (Avg Bid)
    $23 Avg Bid
    28 bids

    We have Protocol stack of a protocol MQTT, and the basic driver code for TeLIt GSM Modem, We are looking for someone who has experience in AT commands of any modem, and can build MQTT with the modem, and make these APIs available for further application development. The communication between the application and the Modem will be on Serial link( Developer

    $357 (Avg Bid)
    $357 Avg Bid
    3 bids

    I have an Arduino and Telit GL865 modem. I want to connect modem with serial (not softserial) and i want to send data every 2 hours and every 5 hours to server (different datas and i dont want to use delay) and also i want, when the device is not send data device listen for incoming connection (for example while device is waiting to send data i want

    $325 (Avg Bid)
    Urgent
    $325 Avg Bid
    11 bids

    I require a relatively simple program written in Python for the Telit GL865-Quad GSM module. The GL865 will be connected directly to an analog sensor that outputs a voltage. The GL865 module is required to monitor this sensor and take a voltage measurement approximately once every second. If the sensor voltage differs significantly from the previous

    $1174 (Avg Bid)
    $1174 Avg Bid
    15 bids

    Change the baseband on samsung with the Telit 910 chip and install android driver

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    would it be possible to replace the baseband modem on HTC or samsung with Telit 910 chip. I need to do that to test a concept I have. will also need to install Telit android driver

    $150 (Avg Bid)
    $150 Avg Bid
    1 bids

    Title: Bootloader for 24FJ256GA106 microprocessor Equipment: Hardware consist of 24FJ256GA106, 24LC1025 IIC eeprom, GL868 telit GSM Modem and some general IO. Compiler: CCS PIC-C Details: Create small flash "boot-loader" application on a PIC 24FJ256GA106 and using the UDP Protocol to transfer through GSM GPRS communication the Hardware

    $911 (Avg Bid)
    $911 Avg Bid
    7 bids

    ...Depending on their feedback we will continue the design or change per requirements. Those beta prototypes would be based on pre-certified 2G/GPS module from higher price range (Telit, Sierra wireless...) since those companies offer a great support during the design and a lot of schematics is already available. The mechanical design (housing) and software

    $150 (Avg Bid)
    $150 Avg Bid
    1 bids

    ...Depending on their feedback we will continue the design or change per requirements. Those beta prototypes would be based on pre-certified 2G/GPS module from higher price range (Telit, Sierra wireless...) since those companies offer a great support during the design and a lot of schematics is already available. The mechanical design (housing) and software

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    ...com/mems/gyro/[login to view URL] 5. [login to view URL] Component required for the second board (3x main components): 1. [login to view URL] 2. UFL SMD Connector 3. [login to view URL] Most

    $593 (Avg Bid)
    Featured
    $593 Avg Bid
    29 bids

    Design a GPS tracker with automotive grade components from Telit, uBlox and STM. I will provide the part numbers of the GPS module, GSM/GPRS module and the MCU. You will need to study the data sheets and design a GPS tracker. Given below are the specs: . 10 digital inputs . 10 analog inputs . 5 digital outputs . Operating voltage: 8V - 30V

    $1189 (Avg Bid)
    $1189 Avg Bid
    10 bids

    Design a GPS tracker with automotive grade components from Telit, uBlox and STM. I will provide the part numbers of the GPS module, GSM/GPRS module and the MCU. You will need to study the data sheets and design a GPS tracker. Given below are the specs: . 10 digital inputs . 10 analog inputs . 5 digital outputs . Operating voltage: 8V - 30V

    $1526 (Avg Bid)
    $1526 Avg Bid
    14 bids

    I need to write a Python script for Telit GT863-PY terminal module. Here is the module that i have [login to view URL] It has build in Python interpreter engine that could operate the module through AT commands. I need to read data from a MODBUS device through [login to view URL] there is no MODBUS library

    $64 (Avg Bid)
    $64 Avg Bid
    2 bids

    Machine 2 Machine application involving the use of a GSM Module from Telit using AT Commands or Embedded Python. The candidate should fully understand TCP/IP protocols for embedded systems and be able to send and manipulate data in a cloud DB (Web application should be included) using an embedded TCP/IP stack. I will provide the GSM module, manuals

    $532 (Avg Bid)
    $532 Avg Bid
    8 bids

    ...not have the time to do myself. It is a simple design with clear instructions, most functions are found inbuilt in the chip. 1. Using AT91SAM9261 bga chip. 2. onboard Telit HE910 BGA chip with suitable power supply (any 3.8V stable supply) 3. 12V power input 4. Connecting the inbuilt Atmel LCD driver to a Lumex LCD (molex connector, Datasheet

    $683 (Avg Bid)
    $683 Avg Bid
    16 bids

    A simple project for an Experienced TELIT Python programmer. Sense=>Wakeup=>Report - TELIT - GE864-GPS - ACCELEROMETER (I2C interface) - Freescale Semi - Battery Charger etc Telit module will sleep/low power mode Wake up on Motion Detect Interrupt Report Location & Event using GSM SMS/Call and Push to Server. Prototype Hardware- GR2

    $77 - $116
    Sealed
    $77 - $116
    2 bids

    I have a simple project - TELIT - GE864-GPS - ACCELEROMETER (I2C interface) - Freescale - Battery Charger etc I have got a development board [login to view URL] I need someone experienced with Telit modules and I2c interfaces experience to work on the project as it is not possible to buy and ship this module to

    $116 (Avg Bid)
    $116 Avg Bid
    1 bids

    We are looking for a Europe based Python expert who can develop a Python script to measure download speed on a CEPAG / Telit modem over a serial connection. The script will download over HTTP a file and measure the time the download takes in seconds and based on file size compute the download speed in Kbps (kilobits per second) The modem will

    $578 (Avg Bid)
    Featured
    $578 Avg Bid
    11 bids

    This hopefully is a fairly simple requirement. I need a Python programmer who has programmed Telit GSM modules previously. The module we are using is the GL865 Quad band. Here is the spec for the program which we would need the Python source code as well as a compiled version. Hardware can be sent for you to test with. A main loop waiting for the

    $428 (Avg Bid)
    $428 Avg Bid
    3 bids

    Project Description: I have a GPS tracer device with telit module GE 865 for tracking vehicle and with different features. Device is configurable via serial to usb cable to load new firmware. Will need demo command to test that solution works. The device is controllable via SMS commands and uses AT Command set. I would like to rewrite the firmware

    $206 (Avg Bid)
    $206 Avg Bid
    6 bids

    Hello I'm looking at hiring someone that can quickly design a PCB that can be used with the Telit N50 433 mhz module. Here is there website. [login to view URL] I need to have a temperature and low battery sensor plus to be ran from 2 - AA batteries. I'm not sure what else you need

    $650 (Avg Bid)
    $650 Avg Bid
    1 bids

    Hello I'm looking at hiring someone that can quickly design a PCB that can be used with the Telit N50 433 mhz module. Here is there website. [login to view URL];p_ac=show&p=117 I need to have a temperature and low battery sensor plus to be ran from 2 - AA batteries. I'm not sure what else you need

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    1 bids

    I wold like to have a pcb trak circuit that interfaces a atmel atmega 8 cpu with a telit gm862 and a MMA7331. I have the design on eagle and you would only have to convert it to a track circuit, and gerber files and a suitable 3.3 power supply for the circuit.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    3 bids

    For a new product based on the Telit GL865 platform, we need a python script that can either determine the approximate location of the unit based on cell tower id's and signal strength (triangulation). Or the unit should simply collect the cell tower ID and signal strength, and pass it on to our servers. Our product GSM module run in a deep sleep

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    4 bids

    I want ...system that will utilize the Telit GM864-GPS module. The design should have the following: Power regulator that can input 6v - 24v DC Antenna connectivity for GPS and GSM systems Expose all GPIO pins via a connector Keep the board size at or below 100mm x 100mm Provide access to the board for a host system to enable onboard python scripting

    $43 - $43
    $43 - $43
    0 bids

    Hi everybody , simply what i have is Telit gm862 , and mikroc compiler and I have simple VB6 application in my PC which is have static Ip , the pic18 is connected to telit modem and it work fine ok ? now to open the TCP connection in PIC18 I need to insert the following command UART1_Write_Text("ATrn"); Deleay_ms(2000); UART1_Write

    $90 (Avg Bid)
    $90 Avg Bid
    5 bids

    1. Telit GE865-QUAD GSM/GPRS 2. Telit Jupiter JN3 GPS Receiver Module 2. LIS331HH Accelerometer via the I2C or SPI ports 3. VQFN8 Embedded SIM Chip switchable to standard SIM Card Slot via manual DIP switch at the side of the board and via digital I/O switch 5. SIM Card Slot 6. Battery charger for Lion Battery. 7. Ipex antenna connector

    $790 (Avg Bid)
    $790 Avg Bid
    19 bids

    ...(changable) to protect the ADC. The system should consume very very low power to make it possible to run for years with a single battery. On GPRS side you can use simcom, telit or siemens modules. You should inform me and let me check with the authority. There should be 3 modes selectable with an extarnal switch. Normal mode is normal mode, programming

    $1866 (Avg Bid)
    $1866 Avg Bid
    18 bids

    ...another free cad software. The product has to be adhere to the design rules at pcbtrain ([login to view URL]). No software is required. The design is based around the Telit GE864-GPS. It must accept an input voltage of 6-30volts - Reverse polarity protection and transient supression for noisy vehicle environment required. An internal fuse must

    $3401 (Avg Bid)
    $3401 Avg Bid
    9 bids

    We are have fleet managment "black-box" based on GL865 connected to GPS module via serial. What we need now is python script firmware that allow: 1. Send position string and status of connected sencors via GPRS using TCP-IP every xx sec when fleet move and yyy sec when it stay. String like NMEA. 2. Setup parametrs xx yy and GPRS (ip and port)

    $300 - $1000
    $300 - $1000
    0 bids

    We are have fleet managment "black-box" based on GL865 connected to GPS module via serial. What we need now is python script firmware that allow: 1. Send position string and status of connected sencors via GPRS using TCP-IP every xx sec when fleet move and yyy sec when it stay. String like NMEA. 2. Setup parametrs xx yy and GPRS (ip and port)

    $966 (Avg Bid)
    $966 Avg Bid
    3 bids

    питоне для Telit (Python on Telit GL865). Если интер&...

    $1000 (Avg Bid)
    $1000 Avg Bid
    1 bids