Protel 98se jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    642 protel 98se jobs found, pricing in USD

    We would like to find a party that is very familiar with KiCad P...to awarding the project. On successful completion of this project we would then want to discuss other ongoing projects migrating a series of PCB Schematics and layouts from Protel Windows to KiCad. Therefore we will be looking at candidates potential to assist with this on going work.

    $230 (Avg Bid)
    $230 Avg Bid
    24 bids

    I need 1 form windows application to Detect phone number from my phone ...and distinctive ring detect, Auto format/speed sensing, Data/Fax/Voice call discrimination, Single configuration profile stored in host, call forward/fallback. Support Windows 98SE/2000/ME/XP/Vista(32/64 Bit)/Win 7(32/64 Bit). 2 RJ11 Ports, you can set your telephone, fax system

    $28 (Avg Bid)
    $28 Avg Bid
    5 bids

    Skills Required: • Designing Schematics of Digital and Analog Circuits • Designing Single Layer and Multi-layer PCB. • Circuit simulation and...and hardware.speciality- • EMI-EMC Layout guid-lines. • Standards compilation (UL, CE) • Good command over Embedded Hardware design. • Proficient in tools like Altium, Protel, Gerb tools etc.

    $354 (Avg Bid)
    $354 Avg Bid
    33 bids

    - Control of the existing 2-layer Et...functionality - Modification of the scheme if an error is detected - The scheme was created with Protel 99SE (PCB Layout Design) - Make a prototype printed circuit board - Testing - Prototype surrender - Predicting a computer with a design scheme with the Protel 99SE program in a file with the final scheme.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    24 bids

    ...- Knowledge of industry standards - Knowledge of IPC-2221/2222/7351 - Familiarity with different PCB CAD tools like PADS PCB, Allegro, Expedition, Board Station, CADStar, Protel and Altium - Strong background with through hole, SMT, and BGA technologies using dual-sided assemblies, and multilayer boards - Good understanding of PCB stackup requirements

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    17 bids

    I need to do some troubleshooting for PROTEL HOTEL MANAGEMENT software.

    $130 (Avg Bid)
    $130 Avg Bid
    7 bids

    A printed circuit board layout must be checked against the schematic to confirm that there are no short circuits or unrouted tracks. The files are provided in Protel format.

    $353 (Avg Bid)
    $353 Avg Bid
    24 bids

    The requirement is to check a printed circuit board layout against the schematic and make sure that there are no unrouted or short circuited tracks. The files are ...requirement is to check a printed circuit board layout against the schematic and make sure that there are no unrouted or short circuited tracks. The files are supplied in Protel format.

    $355 (Avg Bid)
    $355 Avg Bid
    13 bids
    Windows Ended

    i have protel hotel management and i need technical support local in kuwait

    $119 (Avg Bid)
    $119 Avg Bid
    5 bids

    project of pcb in ONLY protel 99 se i have some in eagle

    $37 (Avg Bid)
    $37 Avg Bid
    7 bids

    i need person who redraw board from eagle to (ONLY) protel 99 se and do some correction in this job create of element's packages correct pcb from new schematic (in protel's sch) some element add correct pinout lcd corect drawing of the packages

    $55 (Avg Bid)
    $55 Avg Bid
    3 bids

    The logo we need is for PROTEL we are a call center/ call center provider so anything to do with phones or in this type of theme. We need Vector File, Stationery Designs, High Resolution logo , Logo Transparency, Source File, 3D Mockup, Social Media Kit, business card and letterhead.

    $76 (Avg Bid)
    Guaranteed
    $76
    119 entries

    I designs P.C.B. Single layer or P.T.H. in Protel software.

    $322 (Avg Bid)
    $322 Avg Bid
    20 bids

    website protel and education service provider

    $396 (Avg Bid)
    $396 Avg Bid
    61 bids

    The Protel files for the printed circuit board is supplied. The schematic is complete as well as the PCB design and some of the component placement. The printed circuit board component must be checked and the board routed

    $335 (Avg Bid)
    $335 Avg Bid
    21 bids

    The project is to redraw the circuit diagrams in Altium/ Protel format. Later we will get you to create some circuit for our new products We need a quote for the attached circuits but not including the last 2 pages. They will need to fit on A4 paper

    $108 (Avg Bid)
    $108 Avg Bid
    15 bids

    ...other components. The following documentation shall be provided: 1, Texas Instruments information on the demonstration board. 2. Mechanical characteristics of the new board (Protel file) SET PIECE PCB-05-0A. The deliverables required are: 1. Schematic file in Altium with schematic library components created in Altium. 2. Printed circuit board layout

    $1266 (Avg Bid)
    NDA
    $1266 Avg Bid
    3 bids

    ...many years was called tenant pro 5.0. Tenant pro evolved from 5.0 to 6.0 to 7.0 and then went out of business. The upgrades required newer operating systems (from windows 98se). The old system did pretty much what I needed and I had no desire to spend money for a system that worked fine for me. That was the correct deision for the next 5 years but

    $698 (Avg Bid)
    $698 Avg Bid
    13 bids

    Design baseboard PCB Layout for MYC-JA5D4X CPU Module ([login to view URL]). Project of orginal development board (MYD-JA5D4X -...connectors of the baseboard. It can be also slightly changed if it simplify the project. This information will be communicated to the contractor of the project. Final project in Protel 98 or newer.

    $349 (Avg Bid)
    $349 Avg Bid
    1 bids

    Design baseboard PCB Layout for MYC-JA5D4X CPU Module ([login to view URL]). Project of orginal development board (MYD-JA5D4X -...connectors of the baseboard. It can be also slightly changed if it simplify the project. This information will be communicated to the contractor of the project. Final project in Protel 98 or newer.

    $59 - $585
    Sealed
    $59 - $585
    11 bids

    We own a Hotel in Switzerland and need help in marketing the hotel, someone who has knowledge of hotel business and PROTEL system. Able to do some telemarketing and contacting companies to look for potential clients etc. Able to offer virtual assistance as a receptionist at times and needs to speak perfect either italian or english ideally both and

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    14 bids

    i Have a pcb layout in PDF both layers and solder mask and also in protel 2.7 .pcb file and solder mask and BOM in excel. I would like the pcb layout to be done in Proteus 8 and also work out schematic which is not existing. The design must be ready for simulation after completion i will not give the hex file for the microcontroller

    $105 (Avg Bid)
    $105 Avg Bid
    18 bids

    We are interested in making WiFi router,Flash drive and Power Bank of our brand hence we require PCB designs . Specification: All Protel, Altium and Eagle design files for Quotation only, You must provided us with a full set of Gerbers in RS-274X format with drill files for Manufacture, As there are sometimes compatibility issues between different

    $502 (Avg Bid)
    $502 Avg Bid
    7 bids

    ...ready and approved for fabrication and assembly. Boards are not too complicated. Time estimates are about 24 hrs for 7x5in board and 8 hrs for 3x4in board. Files are in Altium/Protel. Ready for approval means: 1. no constraint violations; 2. BOM and CPL files produced; 3. Gerbers (x274) 4. Board Outlines 5. Fab notes Files will be sent to manufacturer

    $467 (Avg Bid)
    $467 Avg Bid
    22 bids

    Hello, I have wordpress website and want to add booking though ([login to view URL]) to the website using API. It would be highly recommended if you have any experience with Protel.net. Thanks.

    $306 (Avg Bid)
    $306 Avg Bid
    6 bids

    ...the customer database, job tracking, invoicing, accounts receivable and a few reports for a small print company. It's currently running on a NT4.0Sp6 Server with 3 Windows 98SE clients. The original source has been lost, but the binaries exist. I believe it was written in Borland Interbase with a Sybase SQL database. I have been able to access the

    $973 (Avg Bid)
    $973 Avg Bid
    19 bids

    ...schematic conversion from Protel Advanced Schematic to and OrCAD design file (.dsn). The original design was done in Protel Advanced Schematic 2.0 (actually 2.2) and we want it converted to OrCAD so we can read it with OrCAD 9 or 10. It is only one schematic and it is only several pages. You would need a working copy of Protel Advanced Schematic 2.0

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    I want the core of this application duplicated. It is a job cost and accounting application. I can ...components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Windows 98SE and up. Use PowerBasic as development tool.

    $2992 (Avg Bid)
    $2992 Avg Bid
    8 bids

    Reverse engineer a product and produce, PCB layout and circuit diagram. The product ... The sample boards can be shipped to you. This is a small project which would suit anyone familiar with PCB design and electronics. The files will need to be provided in Protel formal and ready for PCB production. The board design is considered to be very basic.

    $334 (Avg Bid)
    $334 Avg Bid
    32 bids

    Need to get designs on protel software.

    $159 (Avg Bid)
    $159 Avg Bid
    14 bids

    We require some one to take an existing design which has the schematic layout and the pcb design and convert into a protel file for manufacuture. Attached is a copy of the schematic and pcb board top and bottom layout. Please do not bid if you have never done pcb layout before as you will lack the skills to be able to complete the task.

    $515 (Avg Bid)
    Featured
    $515 Avg Bid
    39 bids

    Hello, have protel pcb data and need reversed it into Eagle to schematic br Julien

    $424 (Avg Bid)
    $424 Avg Bid
    14 bids

    A design for a pH electrode amplifier was created using the referenc...the guard ring as specified in the document. Please provide proposal of how you will correctly implement guard ring. Deliverables will be in the form of protel design files (board/schematic) Protel (Altium) design files and pH amplifier reference document: [login to view URL]

    $158 (Avg Bid)
    $158 Avg Bid
    9 bids

    ...selected to maximize ratio of SMD. 4-20mA sensor will be connected via BNC connector. The output should be screw terminal with GND, VCC (3.3v), and SIGNAL. Design should be in Protel or Altium Designer. Deliverables should be in the form of schematic file, PCB design file, BOM, and gerber. An example of what we are trying to create is here: http://www

    $164 (Avg Bid)
    $164 Avg Bid
    14 bids

    We are a small, creative and innovative manufacturing company. We ...aluminium PCB, 80 x 80 mm for high power LEDs and a driver. Project 2) Double sided PCB, 80 x 80 mm. We will provide schematics in Protel / Altium and a mechanical layer DXF. Layout should be completed in Protel / Altium format. Good English is essential for communication.

    $720 (Avg Bid)
    $720 Avg Bid
    37 bids

    ...have them signable on the ipad and as soon as they are signed sent off to me (salesmanager) note [login to view URL] [login to view URL] I would like to have reports of when each day my salespeople are signing into the app so I can see if they are starting work at 6 in

    $19 (Avg Bid)
    $19 Avg Bid
    6 bids

    I have a PCB layout complete with original PFW files and generate...and the manufacturer part numbers added. The SY3FRPWM circuit is separate but I also need a separate BOM for this (attached [login to view URL]). I can provide the original Protel for Windows (99SE) .PCB files if needed, so please let me know if you're willing to take on this project!

    $226 (Avg Bid)
    $226 Avg Bid
    5 bids

    We need a PCB redesigned. See attached file We prefer Altium/ Protel software for the design. We will require the schematics and READY for manufacture project

    $103 (Avg Bid)
    $103 Avg Bid
    22 bids

    ...schematics, embedded PIC software, related PC software and full documentation. For details please see attached paper. b) Providing detailed and full drawn schematics in Altium (Protel) DXP Rev 7.2 format and a full Bill of Material including a minimum of 2 suppliers. c) Make the program for the PIC processor (PIC18F25K50) to operate the PSS with the functions

    $1813 (Avg Bid)
    $1813 Avg Bid
    18 bids

    ...confirming all design parameters including loop control stability; - shipping 9 out of 12 prototypes to Australia; - full documentation, including schematic and PCB files in Protel 99SE format. Please read carefully attached "Power converters specification [login to view URL]" file. All bidders are required to provide feedback using attached questionnaire file

    $3377 (Avg Bid)
    Featured
    $3377 Avg Bid
    12 bids

    Design 3 types of switching isolated variable voltage output DC-DC converters. 1. Works include: - design (including initial analysis of alternative ...confirming all design parameters including loop control stability; - shipping 9 out of 12 prototypes to Australia; - full documentation, including schematic and PCB files in Protel 99SE format.

    $1942 (Avg Bid)
    $1942 Avg Bid
    15 bids

    Based in Penang Island. Possess knowledge of HDI/TUV & Load Boards Design & Schematic, Gerber knowledge is required, Experience in software (Cadence- Orcad, P-cad, Protel, Eagle, Camcastic and etc ) will be an advantage. [The Administrator removed this message for containing contact details which breaches our Terms of Service.]

    $166 (Avg Bid)
    $166 Avg Bid
    9 bids

    ...Hotel Software) "Wellness" (also Wellness Software), "Cloud" (also Cloud Computing) and the software Brand name "Protel". Following targets: - with "Hotelsoftware" and "Protel" under the first 3 within 2-3 month - for the rest keywords, under the first 10 Questions: - are you interessded in this job? - what

    $300 (Avg Bid)
    $300 Avg Bid
    1 bids

    I have a 240VAC -24V AC 144VA toroidal transformer. the 24VAC is fed into a 8 channel power splitter PTC fuse PCB . i need a low cost design and PCB Layout of a ...fuse. If the PTC is Closed cct (normal)status , LED will be Blue . a Fault(short or very low resistance) the Led will change to be Red . I already have a PCB size and on Protel File .

    $156 (Avg Bid)
    $156 Avg Bid
    15 bids

    ...software and show a quick demo. The Coder will need the following to run the software properly in addition to whatever you require to record the tutorial. Windows 98SE or greater Microsoft Excel and at least 2 or 3 twitter accounts. After I accept the coders bid I will send you the software, the software is pretty self explanatory

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Expert in designing schematic of PCB designs using "CADStar" , "OrCAD", and Protel and BiCAD for designing Hybrids. Also experienced in CAM work.

    $307 (Avg Bid)
    $307 Avg Bid
    4 bids

    ...one of the ten antenna will be used). The deliverable should be: 1. a PCB design with layout and components information, and ready for manufacturing. 2. in Protel format 3. in Protel ASCII format readable by KiCad 4. Gerber file If the designer can input design suggestion, it will be great. If the designer can even make the PCB with all the

    $310 (Avg Bid)
    $310 Avg Bid
    15 bids

    ...one of the ten antenna will be used). The deliverable should be: 1. a PCB design with layout and components information, and ready for manufacturing. 2. in Protel format 3. in Protel ASCII format readable by KiCad 4. Gerber file If the designer can input design suggestion, it will be great. If the designer can even make the PCB with all the

    $204 - $306
    $204 - $306
    0 bids

    ...The job is: a) To make a simple RWC based on a processor circuitry, including one (1) Firmware prototype and full documentation. b) Providing detailed schematics in Altium (Protel) DXP Rev 7.2 format and a full Bill of Material including a minimum of 2 suppliers. A schematic must be provided for approval before layout work is begun. c) Make the program

    $1290 (Avg Bid)
    Featured
    $1290 Avg Bid
    10 bids

    ...The job is: a) To make a simple PTM based on a processor circuitry, including one (1) Firmware prototype and full documentation. b) Providing detailed schematics in Altium (Protel) DXP Rev 7.2 format and a full Bill of Material including a minimum of 2 suppliers. A schematic must be provided for approval before layout work is begun. c) Make the program

    $800 (Avg Bid)
    Featured
    $800 Avg Bid
    8 bids