Kicad stm32 jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    890 kicad stm32 jobs found, pricing in USD

    Hi! I have a set of component that I need the schematic symbol and corresponding for in KiCad. I'm pretty sure that most of the components lack publicly available symbols and footprints, so you are expected to do the symbols and footprint on your own. High quality is expected. Ask if you have any questions. The full requirements are attached below

    $168 (Avg Bid)
    $168 Avg Bid
    12 bids
    KiCAD PCB Designer 6 days left
    VERIFIED

    I need a PCB Designer experienced on KiCAD. I will need their past projects proving their skills on KiCAD.

    $201 (Avg Bid)
    $201 Avg Bid
    18 bids

    We ran into issues with implementing a PD solution using the FUSB302 and due to time-constraints, we req... The basic diagrams and system requirements are attached below. I will provide the technical documentation of our current implementation with the FUSB302 (connected to an stm32) once the project is awarded. Looking forward to hearing from you!

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    4 bids

    I have a project, which need to code stm32f407 for application. It have impedance measurement circuit with voltage regulators, DDS, current source, op-amps, digital pot. Need someone to do the all programming with stm. Is anyone want reviews ? and can do cheap ? you are most welcome. i have very low budget. Start project: End of May Time: Negotiable Preference: whoever does cheap final circuit ...

    $108 (Avg Bid)
    $108 Avg Bid
    12 bids

    I want to send data from Python to STM32 via serial interface and STM32 ?c. The STM32 code is automatically generated with Simulink and using blockset Waijung. Budget maximum 50EUR.

    $32 (Avg Bid)
    $32 Avg Bid
    3 bids

    STM32 Arm işlemcide çalışabilecek şekilde M-Bus protokolünün c dilinde hazırlatmak istiyorum. I would like to prepare the STM32 Arm in C language in the M-Bus protocol.

    $240 (Avg Bid)
    $240 Avg Bid
    9 bids

    Hi Ahmed, Would u be able to send data from Python to Stm32 via seriel interface? Br

    $28 (Avg Bid)
    $28 Avg Bid
    1 bids

    Hi, Jin. I wanna meet you asap. I have a very important work so we have to solve issues. - C, C++, C#, Embedded System, etc - STM32, FPGA, etc Let's discuss more details by chatting. Best Regards, AHC

    $466 (Avg Bid)
    $466 Avg Bid
    9 bids

    Hi, Jin. I wanna meet you asap. I have a very important work so we have to solve issues. - C, C++, C#, Embedded System, etc - STM32, FPGA, etc I want to discuss more details by chatting here. Best Regards, AHC

    $182 (Avg Bid)
    $182 Avg Bid
    2 bids

    Hi, Jin. I wanna meet you asap. I have a very important work so we have to solve issues. - C, C++, C#, Embedded System, etc - STM32, FPGA, etc I want to discuss more details by chatting here. Best Regards, AHC

    $140 (Avg Bid)
    $140 Avg Bid
    3 bids

    I need assistance performing the following tasks: Download and successfully build the DJI Onboard SDK STM32 sample using Keil uVision. Using the TelemetrySample as guidance, create a simple program to get the GPS coordinate from the A3 (instead of the M100 as default in the code), read a simple string from a second UART port, and write the values to

    $472 (Avg Bid)
    $472 Avg Bid
    5 bids

    I need assistance performing the following tasks: Download and successfully build the DJI Onboard SDK STM32 sample using Keil uVision. Using the TelemetrySample as guidance, create a simple program to get the GPS coordinate from the A3 (instead of the M100 as default in the code), read a simple string from a second UART port, and write the values to

    $177 (Avg Bid)
    $177 Avg Bid
    2 bids

    I am able to upload a program using st-link application however if I upload within eclipse AC6 as provided by ST I get the following errors With a generic stlink v2 Open On-Chip Debugger 0.10.0-dev-00019-g5352c55 (2019-02-14-15:45) Licensed under GNU GPL v2 For bug reports, read [login to view URL] srst_only separate srst_nogate srst_open_drain connect_assert_srst Info : The selected transport to...

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    6 bids

    ...need a 2 layer PCB designing using the latest version of KiCAD (5.1.2 currently). We have created the schematic, we now need someone familiar with KiCAD PCB layout to take the schematic and create the PCB layout ready to send to the PCB manufacturers (so we will need gerber files as well as the KiCAD files you create). The PCB is 90mm x 64mm. All the components

    $157 (Avg Bid)
    $157 Avg Bid
    14 bids

    VL53L1X is new generation, long distance ranging Time-of-Flight sensor. It is one of the internal sensors of Discovery IoT node that was used in the lab for EE390. It can be used in service robots and vacuum cleaners for fast obstacle detection or in drones for landing assistance, hovering, ceiling detection, in smart shelves and vending machines for goods inventory monitoring. It’s I2C writ...

    $187 (Avg Bid)
    $187 Avg Bid
    3 bids

    Jin, I need you to complete a STM32 programming job for my LED lighting array.

    $300 (Avg Bid)
    $300 Avg Bid
    1 bids

    STM32L051K8U7 processor with QMC5883L compass display baring on lcd connected to PCF8562 Generate of a STM32L051K8U7 using stm32cubeMX then connect via i2c to a QMC5883L to get a compass baring and then display the baring on a LCD connected to a PCF8562 via the same I2C interface a gps receiver is connected to the serial port and Basic latitude and Longitude from NMEA need to be displayed

    $17 (Avg Bid)
    $17 Avg Bid
    1 bids

    Hi Cyril, I need a routine to interface STM32 nucleo-32 board /with STM32L432 to an ADC Maxim (MAX11100). We need a 32-pulse clock, during the last 24-clock we need to take prom SPI the data and then store it in RAM. Can you do this for the budget? Then bigger projects will follow..... Thank you BR Fabio

    $22 (Avg Bid)
    $22 Avg Bid
    1 bids

    STM32L051K8U7 processor with QMC5883L compass display baring on lcd connected to PCF8562 Generate of a STM32L051K8U7 using stm32cubeMX then connect via i2c to a QMC5883L to get a compass baring and then display the baring on a LCD connected to a PCF8562 via the same I2C interface a gps receiver is connected to the serial port and Basic latitude and Longitude from NMEA need to be displayed

    $366 (Avg Bid)
    $366 Avg Bid
    8 bids

    the task is developing driver code for si4063 transmitter and si4362 receiver chip for stm32. we do not need full function driver for these chips. simple packet transmit and receive in some settings are enough. also there is example C driver code and many stm32 examples for very similar silabs si4432 and si4463 chips. silabs provides register settings

    $156 (Avg Bid)
    $156 Avg Bid
    6 bids

    I want to implement Firmware Over The Air in STM32 microcontroller.

    $167 (Avg Bid)
    $167 Avg Bid
    5 bids

    Dear Sir/Madam I need an application for Android system that to connect ARM micro controller . I have 5 sensor , 10 keys and 8 led . please contact me for details . Thanks

    $621 (Avg Bid)
    $621 Avg Bid
    29 bids

    the task is developing driver code for si4063 transmitter and si4362 receiver chip for stm32. we do not need full function driver for these chips. simple packet transmit and receive in some settings are enough. also there is example C driver code and many stm32 examples for very similar silabs si4432 and si4463 chips. silabs provides register settings

    $201 (Avg Bid)
    $201 Avg Bid
    9 bids

    We want someone to design a circuit for earthquake and fire detection alarm that with the following the hardware. For Microcontroller you may use arduino mini , stm32 or any other The system will have gprs and will every hour connect to server to send temp ,air quality,flame sensor valuess . The gsm alert number and alarm threshold values will be read

    $136 (Avg Bid)
    $136 Avg Bid
    25 bids

    ...programming is done via the USART1 RX/TX pins. Task: Aim of this task is the implementation of a programming application under Windows, which makes it possible to program the STM32 using the USB2UART hardware. The binary file to be programmed is stored on a web host and can be downloaded via SFTP. The newest binary file should always be programmed. The

    $447 (Avg Bid)
    $447 Avg Bid
    11 bids

    ...compact. The receiver will receive the data and send to web via a URL through onboard GPRS. It will be powered by DC adapter but will have Lipo battery backup. You can use stm32 chips for microcontroller and a6 module for gprs. You can suggest other options with ultralow options For transmitter and receiver module please check the attached PDF. You

    $234 (Avg Bid)
    $234 Avg Bid
    10 bids

    Hi Nasreen S., I have two requirements - 1. High Power DC-DC converters, 2. embedded C for STM32, LPC, GSM module interface. Message me if you are interested and will share further details.

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    1 bids

    Hi, I have two requirements - 1. High Power DC-DC converters, 2. embedded C for STM32, LPC, Modbus, GSM module interface. Message me if you are interested and will share further details,

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    1 bids

    Hi Manmohan V., I have two requirements - 1. High Power DC-DC converters, 2. embedded C for STM32, LPC, GSM module interface. Message me if you are interested and will share further details,

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    1 bids

    Hello, I created a schematic in KICAD for a little MCU-project. It is called "Aqua-Control" because with the MCU one can control pumps and display the temperatur of a aquarium. Due to the fact, that I dont have that much experience in creating circuits/schematics I need someone to verify that the created schematic is ok. As well I need a pcb layout

    $192 (Avg Bid)
    $192 Avg Bid
    44 bids

    I need kicad design expert for long time project. need good communication and quality for schematic and pcb, gerber, BOm I will share project via interview.

    $28 (Avg Bid)
    $28 Avg Bid
    11 bids

    Hi current one is simple one for testing. Looking for long term developer that has very experiences in kicad Thank you

    $32 (Avg Bid)
    $32 Avg Bid
    4 bids

    We want someone to design a circuit for earthquake and fire detection alarm that with the following the hardware. For Microcontroller you may use arduino mini , stm32 or any other The system will have gprs and will every hour connect to server to send temp and humidity info and also check with the server to retrieve new settings . The gsm alert number

    $319 (Avg Bid)
    $319 Avg Bid
    4 bids

    ...the STM32, but are not received by the .Net Application. Hundreds of reports are received, then a large number are dropped. I need USB HS HID Driver written for Microsoft .Net Windows Forms Project to Manage, Read and Write High Speed Custom USB packets ensuring that no packets are dropped. The driver should receive all packets sent from STM32. No

    $500 (Avg Bid)
    $500 Avg Bid
    1 bids

    We want someone to design a circuit for earthquake and fire detection alarm that with the following the hardware. For Microcontroller you may use arduino mini , stm32 or any other The system will have gprs and will every hour connect to server to send temp and humidity info and also check with the server to retrieve new settings . The gsm alert number

    $188 (Avg Bid)
    $188 Avg Bid
    30 bids

    ...compact. The receiver will receive the data and send to web via a URL through onboard GPRS. It will be powered by DC adapter but will have Lipo battery backup. You can use stm32 chips for microcontroller and a6 module for gprs. You can suggest other options. For transmitter and receiver module please check the attached PDF. You will need to provide

    $672 (Avg Bid)
    $672 Avg Bid
    28 bids

    We have to make small changes on a schematic and PCB. Quite simple, but they need to be done right now. Design is in KiCad. Thanks!

    $28 (Avg Bid)
    $28 Avg Bid
    8 bids

    i need support to measure the duty cycle of an input pwm signal using STM32 µC with Simulink using STM32-MAT-Target.

    $17 (Avg Bid)
    $17 Avg Bid
    3 bids

    I need you to design a circuit that will have the following MCU - STM32 GPRS-mini A6 Power regulator for A6 Will read values via USB and call an url I am looking for someone in China who can design and suggest us printing and assembling vendors.

    $484 (Avg Bid)
    $484 Avg Bid
    26 bids

    Amazon Alexa kind of version both mini and big one( from client requirements to mass manufacturing), SOHO product, IP camera , smart power p...BLE, ZigBee , WiFi, ZWave , NFC , ble 5, Burn in board , daughter boards , motherboards , processor based projects like imx6 , am3352, am3354. controller based design like stm32, Msp430 etc., RF antenna design.

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    1 bids

    I would like a you to program a 2-channel filter bank using C on the stm32f4 Discovery Board. please use atollic True studio for STM32 software and please give instructions on how to import the file to the software. The filter banks should contain 58 order FIR filters, high pass and low pass filters. I would also like if you could generate signals

    $278 (Avg Bid)
    $278 Avg Bid
    6 bids

    I have a hand written SystemInit() function in system.c file for STM32L475 MCU. I want to port it to STM32F407 Discovery board. The main task is to remove any clash between the GPIO pins that are already used in the STM32F407 Discovery board. Budget is $10.

    $22 (Avg Bid)
    $22 Avg Bid
    4 bids

    Hi Kiran, I am using a Stm32 to run a simulink Model of a dc motor on IT. unfortunately the Set speed of the Motor comes in Lin message and the Microcont. Dose Not Support this on simulink. So is it possible to write a CAPL Script to to get the the data from Lin messages on canoe and send it to the Microcontroller in CAN message Regarda

    $56 (Avg Bid)
    $56 Avg Bid
    1 bids

    Need a SVPWM circuit and code using arduino or STM32 urgent... if u have any ready or past project which is already done is also fine.

    $116 (Avg Bid)
    $116 Avg Bid
    1 bids

    Hello I am looking for engineer with experience for stm32 programming. stm32 + GPS tracker , accelerometer sensor.... we can process one by one. Best

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    19 bids

    ...company based in the UK with over 20 years of experience. We are putting the finishing touches to a new product but have found a few PCB issues that need fixing. Existing KiCAD PCB design needs updating to new Issue: * We've already updated the schematic, * One connector footprint needs changing (from 2-pin to 3-pin), * Two ICs now get power from a

    $203 (Avg Bid)
    NDA
    $203 Avg Bid
    15 bids

    have completed schematic and it has ERC checking issues. need to fix the issues. i can share schematic file via interview.

    $35 (Avg Bid)
    $35 Avg Bid
    17 bids

    i need support to programm stm32 µc with Simulink using MAT-Target.

    $49 (Avg Bid)
    $49 Avg Bid
    6 bids