Electronics Engineers For Hire

  • Electronics
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

Showing 100 results
  • Hire     adutzu07
Hire     adutzu07

    adutzu07 adutzu07

    Romania $40 USD / hour
    PCB Layout designer
    Romania
    5.4
    21 reviews 21 reviews $40 USD per hour
    More than 20 years experience in PCB Layout designing. Good knowledge in HW design, EMC standards, High-Speed with SI and PI design. I pay attention to different signal lines routing to reduce all parasit effects. Working in special with Altium Designer, finished over 300 custom projects until now. Working also with...
    More than 20 years experience in PCB Layout designing. Good knowledge in HW design, EMC standards, High-Speed with SI and PI design. I pay attention to different signal lines routing to reduce all parasit effects. Working in special with Altium Designer, finished over 300 custom projects until now. Working also with the simulation and optimization for the PCB boards. I WILL ACCEPT ONLY projects that I can finish !! less
  • Hire adutzu07
  • Hire     DeepNetMatlab
Hire     DeepNetMatlab

    DeepNetMatlab DeepNetMatlab

    Turkey $20 USD / hour
    MSc Electrical Engineer
    Turkey
    3.2
    1 review 1 review $20 USD per hour
    I'm an electircal engineer and PhD student. I am specialized in but not limited to: - Digital signal processing - Biomedical signal (EEG, ECG, etc) processing - Pre-processing signals for machine learning algorithm - Features extraction for machine learning algorithm - Classification with k...
    I'm an electircal engineer and PhD student. I am specialized in but not limited to: - Digital signal processing - Biomedical signal (EEG, ECG, etc) processing - Pre-processing signals for machine learning algorithm - Features extraction for machine learning algorithm - Classification with k nearest neighbor (kNN) - Classification, regression, modeling and prediction with Artificial neural network (ANN) - Classification, regression, modeling and prediction with Support vector machines (SVM) - Image/signal transformation and representation for deep learn. ing algorithms - Image to label classification with CNN - Image to image regression with CNN - Object detection with R-CNN, fast R-CNN, faster R-CNN and YOLO - Image denoising with DnCNN - Image generation with GAN and VAE and etc. - Time series prediction with LSTM - Sequence to label classification with LSTM - Sequence to sequence classification with LSTM less
  • Hire DeepNetMatlab
  • Hire     noumanmehtab86
Hire     noumanmehtab86

    noumanmehtab86 noumanmehtab86

    Pakistan $25 USD / hour
    Product Development Company
    Pakistan
    5.8
    20 reviews 20 reviews $25 USD per hour
    Looking for Solution to your IT or Electronics based Problems?? If Yes than You are on the right Place. I'm Electronics Engineer having Experience of 12+ years of Working in the field. I'm running my own company now named as "Falcon Systems". I have teams of highly skilled and professional people having experience in...
    Looking for Solution to your IT or Electronics based Problems?? If Yes than You are on the right Place. I'm Electronics Engineer having Experience of 12+ years of Working in the field. I'm running my own company now named as "Falcon Systems". I have teams of highly skilled and professional people having experience in the field of Electronics,IT,Telecommunication, Design,Embedded System, Signal and Systems,Internet of Things (IOT) ,App Dev, Web Dev and Image Processing. We are here to solve your problems and bring your thoughts to reality. less
  • Hire noumanmehtab86
  • Hire     EinsteinWorks
Hire     EinsteinWorks

    EinsteinWorks EinsteinWorks

    India $35 USD / hour
    Pursuing Phd in Power Electronics
    India
    5.5
    20 reviews 20 reviews $35 USD per hour
    Several years of industrial experience in power electronics and power system R&D. Experience in GATE coaching for more than three years. Expert in: MATLAB/Simulink, PSCAD, Logisim, PowerWorld. Micro-Cap , LTspice, Multisim, PSIM, KiCad, SIMetrix/SIMPLIS. FEMM
    Several years of industrial experience in power electronics and power system R&D. Experience in GATE coaching for more than three years. Expert in: MATLAB/Simulink, PSCAD, Logisim, PowerWorld. Micro-Cap , LTspice, Multisim, PSIM, KiCad, SIMetrix/SIMPLIS. FEMM less
  • Hire EinsteinWorks
  • Hire     mozumder007
Hire     mozumder007

    mozumder007 mozumder007

    Bangladesh $10 USD / hour
    R&D Electronics Engineer
    Bangladesh
    5.4
    52 reviews 52 reviews $10 USD per hour
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done...
    currently, I'm doing BSc in electrical and electronics engineering . I am experienced in electrical & electronics engineering including robot system design, PCB designe,iot system design.I have enough experiences with Arduino. I am a full-time freelancer and I am flexible with respect to working hours. i have done many projects. and they are #iot based load control #iot based dimming fan light #iot based sending data to website #gsm based security project #fingerprint attendance system #advanced pid line following robot #sun tracking solar system #home automation #iot agricultural monitoring system #obstacle avoiding robot # small range radar system using sonar sensor . # Ir remote-based load control circuit. # design and implementation of custom made arduino and stm32 boards . # Bluetooth controlled car . # wireless data transmission using nrf module # Home security device using esp and gsm module. # Mini drone with Esp 32 . # STM32 featured line following robot and many more robotics projects. I have experience about: 1.Circuit Design 2.PCB Design & Layout making using the following softwares : ✅ Altium ✅ Autodesk Eagle ✅ Proteus ✅ Orcad ✅ KiCad etc My goal is to provide : ✅ Best effort and quality for every project at reasonable rate ($) . ✅ Free servicing facility even after completing the project. ✅ The project perfectly within shortest possible time. Even i will try my best to complete my project before the expiration time.Please allow me to complete your project and i am ensuring my best effort for this.I would love to hear more about what would make this project successful for you and explore if we would be good fit to work together.I am looking forward to your response and wish you all the best for you future. So you can completely rely on me. less
  • Hire mozumder007
  • Hire     mos3d
Hire     mos3d

    mos3d mos3d

    Egypt $25 USD / hour
    R&D Electronics Engineer ( Master Degree ✅ )
    Egypt
    6.3
    50 reviews 50 reviews $25 USD per hour
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work less
  • Hire mos3d
  • Hire     A5Alberto
Hire     A5Alberto

    A5Alberto A5Alberto

    Mexico $22 USD / hour
    DOMO Integral Solutions
    Mexico
    5.4
    2 reviews 2 reviews $22 USD per hour
    I have been working in Continental Automotive Guadalajara and now in Queretaro, first as an intern, then as an Engineer Jr., then as Full Engineer, and then as Coordinator. I had the opportunity to develop myself and implement my knowledge in the technical part, but also in the management area. Nowadays I have my...
    I have been working in Continental Automotive Guadalajara and now in Queretaro, first as an intern, then as an Engineer Jr., then as Full Engineer, and then as Coordinator. I had the opportunity to develop myself and implement my knowledge in the technical part, but also in the management area. Nowadays I have my own company called DOMO Integral Solutions, which the main purpose consists of to integrate solutions created by a multidisciplinary team to completely fill the client's needs. Our activities include development, testing, manufacture, and prototyping. We combine almost 20 years of experience in different areas from industry, such as automotive development, PCB manufacture, drone design, telecommunications, business management, etc. Nowadays my job consists of combine both sides (technical and management), be responsible for people and achieve goals for projects, always maintaining high standards of quality. less
  • Hire A5Alberto
  • Hire     amelectronics
Hire     amelectronics

    amelectronics amelectronics

    Pakistan $30 USD / hour
    Embedded System Designer and Programmer
    Pakistan
    6.5
    45 reviews 45 reviews $30 USD per hour
    My name is JAMAL and I have expertise in following fields of technology. (Apart from my experience, I will get idea from you and will deliver the complete working project) a. Microcontroller programming; 1. AVR (8- Bit, 32-Bit) 2. TI (CC13xx, CC25xx, CC26xx, CC32xx) 3. 8051 (Atmel, Intel, Nuvoton) 4. STM...
    My name is JAMAL and I have expertise in following fields of technology. (Apart from my experience, I will get idea from you and will deliver the complete working project) a. Microcontroller programming; 1. AVR (8- Bit, 32-Bit) 2. TI (CC13xx, CC25xx, CC26xx, CC32xx) 3. 8051 (Atmel, Intel, Nuvoton) 4. STM (STM8F, STM32F) 5. Nordic (nRF51, nRF52) 6. Cypress BLE PSoCs 7. Dialog's DA1458x 8. ESP12, ESP32 b. Electronic Development Boards; 1. Arduino 2. STM32 Discovery 3. TI's Launchpad c. Electronics Modules; 1. RFID and Fingerprint Module 2. RF Tranceivers(Silicon Labs chips, Zigbee, Wifi and Nordic etc) 3. Camera Modules(Omnivision) 4. SD card and memory chips 5. All type of displays ie LCD, GLCD, TFT, LED, OLED etc 6. IoT Modules d. Computer Software 1. Keil, Code Composer Studio 2. AVR Studio, MPLAB, STVD 3. Altium, Eagle 4. Cypress PSoC Creator 5. Android Studio I can also develop android apps and IoT projects with online database management. :-) less
  • Hire amelectronics
  • Hire     acarloss
Hire     acarloss

    acarloss acarloss

    Portugal $40 USD / hour
    Embedded Systems Development
    Portugal
    5.4
    10 reviews 10 reviews $40 USD per hour
    Experienced Embedded Systems Engineer, working 15+ years in the area. Experience in: - Architectures: MCS51, PIC, AVR, ARM, MIPS, x86, etc; - Communication protocols: serial based, IP, LonWorks, X10, etc; - RTOS: FreeRTOS, uC/OS, proprietary, etc; - Several silicon manufacturer software stacks: IP, USB, Filesystems,...
    Experienced Embedded Systems Engineer, working 15+ years in the area. Experience in: - Architectures: MCS51, PIC, AVR, ARM, MIPS, x86, etc; - Communication protocols: serial based, IP, LonWorks, X10, etc; - RTOS: FreeRTOS, uC/OS, proprietary, etc; - Several silicon manufacturer software stacks: IP, USB, Filesystems, etc; - Too much to mention... less
  • Hire acarloss
  • Hire     Andrii0125
Hire     Andrii0125

    Andrii0125 Andrii0125

    Ukraine $30 USD / hour
    Senior hardware and software developer
    Ukraine
    5.1
    14 reviews 14 reviews $30 USD per hour
    I have been working for developing hardware and software over 10+ years. My skills: - Electronic circuit design - PCB layout - Solidworks/Autocad, 3D modeling/Animation - C/C++ programming for MCUs - Matlab - Python - Labview - RF/Microwave engineering I will...
    I have been working for developing hardware and software over 10+ years. My skills: - Electronic circuit design - PCB layout - Solidworks/Autocad, 3D modeling/Animation - C/C++ programming for MCUs - Matlab - Python - Labview - RF/Microwave engineering I will give the qualified results to clients and support their success perfectly. I will work in client's timezone and always will keep good communication. less
  • Hire Andrii0125

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""